SD at 6V Adapter

[Cisco]

Just figured I would get myself into more trouble, but I had to share

I had some time today so a few hours at my buddys shop and I made an adapter for the SD to handle 2 3v CR2's for a total of 6V (Unprotected cells) or 1 14500 @ 3.7v (Protected Cells). I machined it from a piece of 7/8" brass. The adapter adds 19mm of length to the SD.

Holy crap!!!!.....Man what a throat hit even on lower nic juices.I am running(Very carefully I might add) on a 901 atty.


Need to make a 801 adapter


Cisco...

 

[scrubadub]

Nice mod but I don't get the 6v thing. I tried it and it does give a throat hit but in a burning rubber kind of a way. What's the attraction?

 

[Cisco]

Nice mod but I don't get the 6v thing. I tried it and it does give a throat hit but in a burning rubber kind of a way. What's the attraction?

Its definitely a juice eater, 2-3 puffs and you need to re-load. If you keep it wet and take short puffs (6V's sends vapor in your mouth like a freight train) theres no burn and you still get good flavor. Its nice when you need that little extra.

Its not for everyone but I like it......a lot.....


Cisco....

 

[PTJD]

Nice work Cisco, I personally love 5-6 volts!

 

[breakfastchef]

Welcome to the world of high-voltage vaping! Ain't it a gas?

 

[Nuck]

I can't imagine vaping at under 4v anymore. It feels so damn weak. Great job btw...I'm jealous of all you guys that can machine your own parts.

 

[TDM]

If you decide to sell 'em. Let me be the first to buy. Need an adapter so can have longer battery life with the 14500 battery and a 801 adapter if you build it.

 

[Cisco]

If you decide to sell 'em. Let me be the first to buy. Need an adapter so can have longer battery life with the 14500 battery and a 801 adapter if you build it.

The highest mAh 14500 comes in is 900mAh .If you needed longer life you could use a 18650 2500mAh.
A 18650 = 2 cr123a/16340. The adapter I made is 19mm (3/4") long. To accommodate 1=18650/2-cr123's/16340's the adapter would need to be 32mm long(1-1/4").....Hmm...

Don't think 2-cr123's/16340's is an option, would be 7.4volts to the atty


Cisco...

 

[TDM]

Trust me when i seen your adapter I checked to see if my 18650 would even fit. Wont go in case. I asked Trog about this very thing. Was told not to run attys at 6 volts! He didnt even consider I wanted to run higher mah for longer battery life. Just said I was stupid for putting 6 volts to the atty.

The highest mAh 14500 comes in is 900mAh .If you needed longer life you could use a 18650 2500mAh.
A 18650 = 2 cr123a/16340. The adapter I made is 19mm (3/4") long. To accommodate 1=18650/2-cr123's/16340's the adapter would need to be 32mm long(1-1/4").....Hmm...

Don't think 2-cr123's/16340's is an option, would be 7.4volts to the atty


Cisco...

 

[Cisco]

Just measured the shell and your right, 18650's wont fit. The shell is just over 17mm and the 18650's are 18.10mm. Maybe its time to make a new shell.....


Cisco....

 

[MonkeyMonk]

Would an adapter like this be good for cleaning addy's? Like that fry it and ice it while it's hot method I read about?

 

[scintar]

The highest mAh 14500 comes in is 900mAh .If you needed longer life you could use a 18650 2500mAh.
A 18650 = 2 cr123a/16340. The adapter I made is 19mm (3/4") long. To accommodate 1=18650/2-cr123's/16340's the adapter would need to be 32mm long(1-1/4").....Hmm...

Don't think 2-cr123's/16340's is an option, would be 7.4volts to the atty


Cisco...

NICE WORK CISCO. love the mods you do. i love doing mods but you have the ability to go to the extreme. Awesome!

 

[bzlytbeer]

I need a buddy with a shop!!

Have to find a lathe....

 

[cddz]

Cisco, what could one do with some of the lathes at harbor freight? I know nothing of lathes, wich one could work for making our own housings?

 

[cddz]

Not which one but rather what size? Thank you.

 

[youfillintheblank]

Holy ....!!!!!!!!

pardon my language, but.....it's just.......so......awesome.

don't call it a SD clone, or Romisen flashlight mod, call it the Holy ....

Just figured I would get myself into more trouble, but I had to share

I had some time today so a few hours at my buddys shop and I made an adapter for the SD to handle 2 3v CR2's for a total of 6V (Unprotected cells) or 1 14500 @ 3.7v (Protected Cells). I machined it from a piece of 7/8" brass. The adapter adds 19mm of length to the SD.

Holy crap!!!!.....Man what a throat hit even on lower nic juices.I am running(Very carefully I might add) on a 901 atty.


Need to make a 801 adapter


Cisco...

 

[youfillintheblank]

There are 17500 batteries....17mm wide, 50mm long, same length as AA but wider and around 1200-1300 mah capacity

The highest mAh 14500 comes in is 900mAh .If you needed longer life you could use a 18650 2500mAh.
A 18650 = 2 cr123a/16340. The adapter I made is 19mm (3/4") long. To accommodate 1=18650/2-cr123's/16340's the adapter would need to be 32mm long(1-1/4").....Hmm...

Don't think 2-cr123's/16340's is an option, would be 7.4volts to the atty


Cisco...

 

[Cisco]

There are 17500 batteries....17mm wide, 50mm long, same length as AA but wider and around 1200-1300 mah capacity

Great info youfill, I will be looking into these.....


Cisco...