Sentinel M16 W/ Nimbus v4 setup questions

[killahs808]

Ok so ive been vaping for 2-3 yrs now but this is my first mech mod and driper... i want to know what would be the best setup and pg/vg ratio. ive only built one coil and wick using 28 k wire and used 3mm silica wick....and for the pg/vg ratio its 67pg/33vg... with this the hit was to harsh...also i dont know how to build dual wicks....been trying to find the "how to's" vids but none of them is what im looking for...pretty much i want to have a setup the will enable me to blow thick clouds with a descent throat hit...and as far as nic goes im currently on 18...so ya need help please. Thanx and happy vaping

 

[Caridwen]

bumping.

Sorry,I can't help. I'm sure someone will be along that can help. If not, I'll move your thread to rebuildables.

 

[Uno mas]

The Nimbus is an outstandin' RDA and is capable of producin' your desired vape. Basically with dual coils both have to be identical to get them to fire evenly. I do 8 wraps of 30AWG around a #6 finishing nail, install the coils, test fire to be sure both are heatin' evenly and then slip 2mm Ekowool thru each one tucking the excess in the well. Be sure your air holes are lined up directly with the coils, just takes a little practice

Regarding juice ratios...

I have found I had to cut my Nic in half with my RDAs, was getting headaches from the Nic being so well delivered. Also VG is the primary component in vapor production and air flow plays a big part as well. I found that a 50/50 ratio is perfect or me, I can blow clouds and still get enough throat hit to satisfy my needs, to each their own

Hope this helps some...

Uno

 

[goodoleboy45]

What ohms are you running and if the ohms are good u might need to drop down on the nic. I run 1.4 ohms with 18mg nic with a igo l and a m16 and it`s a great vape

 

[Imperialbeachboy]

Drop down the nix and raise the vg

 

[killahs808]

ok thanks guys also as far as wicks goes has anyone tried cotton??? ive hear cotton is a good wick but not sure....and could you also send pix if you guys have of how your setup is....im more of a picture person...its easier to see what you guys did then tell me....

 

[Caridwen]

I'll move this to rebuildables- see if someone posts/has pics.

 

[killahs808]

ok thanks bro

 

[Imperialbeachboy]

Watch all riptrippers YouTube videos.

 

[Shipmister]

I usually do 6 wraps of 28 guage and make it a micro coil. IMO micro coils and cotton are the easiest builds I've done just because you don't have to rebuild the coil.

Sent from my DROID RAZR using Tapatalk

 

[ta2dave76]

I think this one came out to .3ohm. Huge clouds, great taste. I use hand picked cotton. The store bought stuff just doesnt feel right.

My nimbus rivals my trident, depending on the build.

 

[ta2dave76]

.

Made this one earlier today. .24ohm. Got the twist abit tighter. This one hits better than the other one.

Oh yeah, airholes are drilled out 2+mm.