Share Contest: Multiple Coil Leads Possibilities with Digifavor Pharaoh Dripper
- Thread starter AlmightyEvan
- Start date
- th_trl_thread_readers 0
-
- Tags
- pharaoh dripper tank
- Status
Round 1 - Entry 2
Share your builds experience, tricks, stories, anything related to coil builds (Words description, pics and videos
prefered):
Sorry, my camera is not working, can't post a picture. All I can do is say that I have no experience building coils, but I would love to give it a try. It makes it easier when your coil goes bad. I tried it once but ended up with a very bad looking coil and the message -- check atomizer-- so yeah...but still, I really want to start building my own coils.
Share your builds experience, tricks, stories, anything related to coil builds (Words description, pics and videos
prefered):
Sorry, my camera is not working, can't post a picture. All I can do is say that I have no experience building coils, but I would love to give it a try. It makes it easier when your coil goes bad. I tried it once but ended up with a very bad looking coil and the message -- check atomizer-- so yeah...but still, I really want to start building my own coils.
ok, well most are doing 3 entries, and Evan posted and didn't say don't do 3 so here goes.
Round 1 #1
1. What do you think about Pharaoh Dripper Tank?
It definitely looks easy to build on. I'm wondering if it would be feasible to mod it to bottom feed, the vid I watched didn't say how deep the juice well was. It's called a tank, but don't know if that's just because it's a deep juice well. Also, if BF'ing it would be good, if it would be as easy as unscrewing the pin and screwing a bf pin in.
@Kenna (this top cap screws on and off) @Kaezziel @kad2371 @Boden @2legsshrt @CountBoredom @whodat2112
Round 1 #1
1. What do you think about Pharaoh Dripper Tank?
It definitely looks easy to build on. I'm wondering if it would be feasible to mod it to bottom feed, the vid I watched didn't say how deep the juice well was. It's called a tank, but don't know if that's just because it's a deep juice well. Also, if BF'ing it would be good, if it would be as easy as unscrewing the pin and screwing a bf pin in.
@Kenna (this top cap screws on and off) @Kaezziel @kad2371 @Boden @2legsshrt @CountBoredom @whodat2112
Round 1 #2
2. Share your builds experience, tricks, stories, anything related to coil builds (Words description, pics and videos preferred)
Can't take pics right now, don't have vids, but have been building for about 1.5 years. Mostly stick to simple dual contact coils with SS wire now. .5 ohms. I got soooooo excited when I built my first coil, you'd have thought I figured out nuclear fission or something. then felt silly when it dawned on me, all I'd done was wrap wire around a screwdriver! lol A kindergartner could have done that.
2. Share your builds experience, tricks, stories, anything related to coil builds (Words description, pics and videos preferred)
Can't take pics right now, don't have vids, but have been building for about 1.5 years. Mostly stick to simple dual contact coils with SS wire now. .5 ohms. I got soooooo excited when I built my first coil, you'd have thought I figured out nuclear fission or something. then felt silly when it dawned on me, all I'd done was wrap wire around a screwdriver! lol A kindergartner could have done that.
Round 1 #2
3. If you were new to coil builds, let us know #WDYVT, i.e. what do you vape today (Pics preferred)
not really new, mostly vape dual ss coils .5 ohms on a Reo with a bf derringer clone atty, but have been branching into tanks a little bit. Expecting the Eagle tank I won from HG to arrive today!! Thanks HG for all your generosity and involvement with the ECF community!!
3. If you were new to coil builds, let us know #WDYVT, i.e. what do you vape today (Pics preferred)
not really new, mostly vape dual ss coils .5 ohms on a Reo with a bf derringer clone atty, but have been branching into tanks a little bit. Expecting the Eagle tank I won from HG to arrive today!! Thanks HG for all your generosity and involvement with the ECF community!!
Round 1 #1
I think this is an amazing rda! I love the build deck. No more worrying about your flat coils getting turned
I think this is an amazing rda! I love the build deck. No more worrying about your flat coils getting turned
Round 1 #2
I've only been building for a few months so I don't have anything pretty enough to take pictures of yet. But I love building, you can really tune in to the exact vape you like. Plus it saves me a ton of money
I've only been building for a few months so I don't have anything pretty enough to take pictures of yet. But I love building, you can really tune in to the exact vape you like. Plus it saves me a ton of money
Round 1 #3
Today I am vaping on my Movkin disguiser with the squonk accessory on it filled with strawberry shortcake
Today I am vaping on my Movkin disguiser with the squonk accessory on it filled with strawberry shortcake
R1 #1
What do you think about Pharaoh Dripper Tank?
I've been intrigued with this concept since I saw the video where Rip was showing it off. The clamps, the juice well, air flow... all seem well thought out.
What do you think about Pharaoh Dripper Tank?
I've been intrigued with this concept since I saw the video where Rip was showing it off. The clamps, the juice well, air flow... all seem well thought out.
R1 #2
Experimenting with the Hannya Blitz. Single coil SS316L, rayon wick. 9 wraps/3mm diameter = .63 ohms.
Experimenting with the Hannya Blitz. Single coil SS316L, rayon wick. 9 wraps/3mm diameter = .63 ohms.
1. Round #1 What do you think of about the Pharaoh Dripper Tank?
I like the method of mounting (Clamps)your Coil and the space that is provided to do so. Makes it easy peasy and allows for all sorts of Coil builds.
The Air Flow coming from directly under the Coil also is desirable.
Last but not least the 25mm makes this Atty perfect for Box Mods.
As has been said; a Winner, winner Chicken Dinner
I don't have one as yet; however would be very interested in purchasing one to try it for a Squonk Box since that is how I Vape the most. The Deep Juice Well is not only great for Dripping but would lend itself nicely to Squonking if possible
I like the method of mounting (Clamps)your Coil and the space that is provided to do so. Makes it easy peasy and allows for all sorts of Coil builds.
The Air Flow coming from directly under the Coil also is desirable.
Last but not least the 25mm makes this Atty perfect for Box Mods.
As has been said; a Winner, winner Chicken Dinner
I don't have one as yet; however would be very interested in purchasing one to try it for a Squonk Box since that is how I Vape the most. The Deep Juice Well is not only great for Dripping but would lend itself nicely to Squonking if possible
Thanks Evan and @Debadoo
Round 1 #1
I like the spring loaded clamps. Makes for easy loading of flat and wide builds.
Round 1 #1
I like the spring loaded clamps. Makes for easy loading of flat and wide builds.
- Status
Similar threads
- Locked
- Locked
