Shopping List For Rebuildable RSST This Weekend

Status
Not open for further replies.

Whitechapel

Super Member
ECF Veteran
Verified Member
Nov 17, 2013
364
426
40
Willoughby Hills, OH
GUYS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

It's done.

Much tasty. A lot of my stuff is steeping so I'm vaping an Ann Arbor native brew, and it's so very, very tasty. It's called Frute Basket.

Thank you guys so much for the help. I sincerely do appreciate it and this just took me from a bad mood to DAMN I DID IT!

Pats for errybody involved.
 

Bunnykiller

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2013
17,431
77,270
New Orleans La.
So what are my alternatives? All the mesh I have is cut weird or bent. Could I do a cotton wick? Would that be easier? I'm trying to work on this this weekend so it'd have to be a solution I could pick up locally.

I have an RSST also my favorite method of wicking is 3mm silica in the tank with about 3/8 - 1/2" out of tank and a wad of cotton on top of that ( the wick feeds the cotton base) I use 30ga wire about 9 wraps for 1.8 ohms in the horizontal mode ( coil lays on the cotton).

Works great at least i think so :)
 

Whitechapel

Super Member
ECF Veteran
Verified Member
Nov 17, 2013
364
426
40
Willoughby Hills, OH
You would either have to vape the tank dry, or use a syringe to get it out. You won't be able to get all the juice out of it unless you disassemble it, but the syringe will gey 99.9% out of there...

Perfect, that is what I ended up doing! I even filled the syringe with hot water, put it in the tank, swished it around, and pulled it out. I did this twice. Then I dry fired it a couple times because I wanted to check the wraps. All systems go, captain. I'm dripping my three flavors I got that could of been ready out of the flavors I have steeping. Root beer is good to go, I really enjoyed it. Blue Moo is getting there but I don't feel is totally ready yet. Butterscotch is up next.

I'm going to sleep so well tonight thanks to you guys!!!

Also my Buckeyes are stepping it up. :D :D
 
Status
Not open for further replies.

Users who are viewing this thread