Sigelei 30W Owners Thread

[genesishep]

I've been using the fogger 4.1, it's dual coil with air flow adjustment and I like it enough to recommend it. keep in mind there will be a learning curve just like with any new vaping equipment. I'm happy using 32 ga wire with a 5/64 bit, I found that the coil works better with winding the wire around smaller bit with cotton gotten from CVS drug store.

It's not a clone and can be gottent here for $23.95 Fogger V4 RBA Rebuildable Atomizer

Taken from their website - All orders that are more than US$15 will be shipped by Registered Airmail free(with tracking number)

I haven't purchased from them yet but will soon, only thing I suggest is make sure it's in stock and being shipped from their USA warehouse.

I have been looking at the fogger v4 and it is on my short list as well. It's a nice option if I give up on the hope of a single coil setup. My only concern about Angelcigs is some of the reviews on their site are not great. Complaints about quality and getting different stuff then they ordered with the company saying "OK, but what you received works right?" Really has me on the fence about ordering from then.

I guess I'm really leaning towards either the taifun or the squape clones at this point because I've kind of blown my budget this month. Lol

Don't worry, vape happy ~ Genesis

"Whenever you find you are on the side of the majority, it is time to pause, and reflect." Mark Twain

- Sent from Tapatalk from my Moto X.

 

[mightymen]

I have been looking at the fogger v4 and it is on my short list as well. It's a nice option if I give up on the hope of a single coil setup. My only concern about Angelcigs is some of the reviews on their site are not great. Complaints about quality and getting different stuff then they ordered with the company saying "OK, but what you received works right?" Really has me on the fence about ordering from then.

I guess I'm really leaning towards either the taifun or the squape clones at this point because I've kind of blown my budget this month. Lol

Don't worry, Vape happy ~ Genesis

"Whenever you find you are on the side of the majority, it is time to pause, and reflect." Mark Twain

- Sent from Tapatalk from my Moto X.

Like I said I never ordered from them yet, but will soon. Their price's are very good and can get delivery in a less than a week from their USA warehouse from what I hear.

If you don't trust or are not comfortable with them then purchase from another vendor you are, IMO: it's worth the extra dollars for the peace of mind.

IMO: caution is always needed when buying on the internet, that's why I look for free shipping and only make small orders so far I never had any problem with a vendor and the internet. I purchased from china before and the waiting was like a living in hell waiting and hoping.

My fogger works perfect and I love it. It's all I use now. Since my Sigelei-30 went back to the vendor for a replacement, I'm using it on my Vamo and works good but not great like on the Sigelei-30

 

[genesishep]

Like I said I never ordered from them yet, but will soon. Their price's are very good and can get delivery in a less than a week from their USA warehouse from what I hear.

If you don't trust or are not comfortable with them then purchase from another vendor you are, IMO: it's worth the extra dollars for the peace of mind.

IMO: caution is always needed when buying on the internet, that's why I look for free shipping and only make small orders so far I never had any problem with a vendor and the internet. I purchased from china before and the waiting was like a living in hell waiting and hoping.

My fogger works perfect and I love it. It's all I use now. Since my Sigelei-30 went back to the vendor for a replacement, I'm using it on my Vamo and works good but not great like on the Sigelei-30

I think I've decided on the Winsmoke Squape clone after doing some research. Now to sneak it past the girlfriend. Lol

I hope you get your Sigelei back soon. Thus thing is awesome!

Don't worry, Vape happy ~ Genesis

"Whenever you find you are on the side of the majority, it is time to pause, and reflect." Mark Twain

- Sent from Tapatalk from my Moto X.

 

[sanjosse]

Hey everyone, if you're interested in picking one up for good price, and you're a verified member, go check out the Co-Op section

Mod: I can't remember if this is allowed, if not, please remove with sincerest apologies

 

[Jomiz]

yeah i saw them in black and copper ...must resist spending more money.. do you know what chip they will be using?

Hey everyone, if you're interested in picking one up for good price, and you're a verified member, go check out the Co-Op section

Mod: I can't remember if this is allowed, if not, please remove with sincerest apologies

 

[peterforpats]

yeah i saw them in black and copper ...must resist spending more money.. do you know what chip they will be using?

the sigelei 30 uses the sx300 chip -it will never have the sx350 chip (according to sigelei). the sx350 chip is for modders and a new line sigelei will be coming out with later....

 

[sanjosse]

the sigelei 30 uses the sx330 chip -it will never have the sx350 chip (according to sigelei). the sx350 chip is for modders and a new line sigelei will be coming out with later....

I think, from what I've read from around the interweb, that the Sigelei 30W uses the YiHi SX300 Chip. Here's an image from Sigelei;

 

[Kumatesh]

The Sig 30W does use the SX300 chip.

 

[regal55]

The Sig 30W does use the SX300 chip.

Its a shame it doesn't use the SX350. I have to make high ohm coils for my KFL's so it doesn't burn the juice since it can down regulate. Other than that its nice.

 

[Ca Ike]

I'm eyeing this mod myself. What's the deal with the down regulation?

 

[Kumatesh]

I'm eyeing this mod myself. What's the deal with the down regulation?

There's no down regulation, unfortunately. If you have your watts (therefore voltage) set lower than what the battery is putting out (visible when pressing the firing button), then it will act like a mech mod and fire at whatever voltage the battery is putting out (therefore increasing your watts)

 

[Kumatesh]

Its a shame it doesn't use the SX350. I have to make high ohm coils for my KFL's so it doesn't burn the juice since it can down regulate. Other than that its nice.

Agreed. Although I'm looking at getting an SX350 with dual 18650s commissioned. Since this device doesn't really support flat top 18650s (it's meant for button tops and those are next to impossible to find), I have to use a dime down the negative end in order to get it to stay on. I don't know for sure, and someone correct me if I'm wrong, but it seems like this causes a big voltage drop (anywhere from .4 to .7v) which forces the battery to use more amps and therefore more battery

 

[mightymen]

I was surprised when I used .7 ohm coil that It didn't burn the juice or wick every only ran a little hotter until it started to regulate at 12 watt setting, most likely because I'm using dual coil fogger. I know my protank single coil can't handle that high wattage.

 

[regal55]

Agreed. Although I'm looking at getting an SX350 with dual 18650s commissioned. Since this device doesn't really support flat top 18650s (it's meant for button tops and those are next to impossible to find), I have to use a dime down the negative end in order to get it to stay on. I don't know for sure, and someone correct me if I'm wrong, but it seems like this causes a big voltage drop (anywhere from .4 to .7v) which forces the battery to use more amps and therefore more battery

mines the opposite, have to use the shortest flat tops I can find or else it won't screw down all the way. Why in the heck didn't they use an SX350? Current burning thru a blueberry net at 12W in a KFL cause the thing won't down regulate.

 

[genesishep]

Agreed. Although I'm looking at getting an SX350 with dual 18650s commissioned. Since this device doesn't really support flat top 18650s (it's meant for button tops and those are next to impossible to find), I have to use a dime down the negative end in order to get it to stay on. I don't know for sure, and someone correct me if I'm wrong, but it seems like this causes a big voltage drop (anywhere from .4 to .7v) which forces the battery to use more amps and therefore more battery

I know that many have had issues with their Sig's running with flattop batteries but mine has been operating flawlessly so far (knock on wood). I know that some have had them work fine at first and suddenly stop. Hopefully mine will continue to work with them.

Don't worry, Vape happy ~ Genesis

"Whenever you find you are on the side of the majority, it is time to pause, and reflect." Mark Twain

- Sent from Tapatalk from my Moto X.

 

[Kumatesh]

mines the opposite, have to use the shortest flat tops I can find or else it won't screw down all the way. Why in the heck didn't they use an SX350? Current burning thru a blueberry net at 12W in a KFL cause the thing won't down regulate.

Well you can use the battery rattle ring to adjust for that. It's meant to be extended out a bit since that's where the vent holes are. Mine started out accepting flats with no issues but over time (like sub 2 weeks) it started cutting off until I put the dime in

 

[mightymen]

Idea - Get a list going - What flattop batteries are giving you problems with short description.

Sony VTC4 - worked for two weeks then stopped cold had to use button top batteries.

 

[Kumatesh]

Sony VTC5 for me. Efest purple 2500mah worked for about 10 minutes even with the dime

 

[regal55]

Panasonic PF18650PF, fits and works slighty too long

 

[twolostminds]

I am wondering if the SX350 can be used to replace the current 30w chip.