Sigelei mini 30 watt.

[HDMontana]

Figured I would start a thread on these since they are released now and I figure some of you have them in hand. I got mine today. I'm really liking it so far. Seems that it hits a little harder than my Cloupor mini 30 at the same settings. Turned it down a few watts and I'm still fogging up a room with my kayfun. One thing I noticed was that the first battery I used was a 20 amp with about 3.8 on the charge. When hitting the power button, the charge indicator really dropped until I let off of the power button. Had it set at 17 watts and volts read 4.9. Maybe this is normal. Put a fully charged 30 amp vtc5 in it and have not experienced the drop yet. I like that it is slightly bigger than the Cloupor. Cloupor seemed just to small in my hand, but lately I have been used to an IPV3. Here's a picture with one of my kayfun V4's on it. Also had a smok air flow controller. I use these on all my mods to protect the threads.



HD

 

[Croak]

Yeah, that's normal, it's showing you the "sag", Yihi style. Since it's regulated, that's really just a way to get an idea of your battery health.

Can you throw up a pic of it and the Cloupor side-by-side?

 

[HDMontana]

Here you go. The flash lit up the Sigelei pretty good but it has a good black finish. Took the silicone cover off for the picture. Width wise, they are virtually the same.



HD

 

[Monotremata]

Where did you get it and how much? Man I can't wait til payday Thursday haha..

 

[HDMontana]

Element Vape for $42.00 and change. Free shipping included. Got the shipping notice Saturday and it was in my mailbox today. I ordered it last Friday. Talk about fast shipping.

HD

 

[HDMontana]

One thing I just noticed that I didn't at first is that it has a little power button rattle. Not much, but it is still there.

HD

 

[Croak]

Here you go. The flash lit up the Sigelei pretty good but it has a good black finish. Took the silicone cover off for the picture. Width wise, they are virtually the same.



HD

Thanks for that. About what I figured, it looks about as tall as an IPV Mini.

 

[sando7]

actually the sig is about 1/8th" shorter

 

[Monotremata]

Element Vape for $42.00 and change. Free shipping included. Got the shipping notice Saturday and it was in my mailbox today. I ordered it last Friday. Talk about fast shipping.

HD

Awesome cheaper than VR and Asmodus! I can't believe the 50w is over twice the price. Are those Yihi chips magic?

 

[Garemlin]

I'm watching this one. Just got my IPV Mini yesterday to go with my Vaporshark. But want a third. Already nixed the Smok M50. There still seems to be come confusion on the chip. I have read that it is the YiHi SX130. And also read, and read that Sigelei has confirmed, that it is an in-house built chip. It is still going back and forth on that topic.

 

[v1k1ng1001]

I'm pretty sure it's a sigelei chip, but that doesn't necessarily mean it is of poor quality.

 

[Monotremata]

Yeah only the 50-150w models have SX chips..

 

[Croak]

I'm willing to bet Sigelei has at least licensed the SX130 rather than ripping off one of their most important partners, and it's also likely that Yihi still makes the boards for them. And while the Yihi SX Mini is doing well, Sigelei has been perhaps the best and most visible customer of Yihi boards, so it'd be a partnership they'd like to maintain as well.

 

[jefsview]

OP -- after firing, does the screen dim really low or does it stay on (bright) until it goes to sleep?

That's the most irritating thing about the IPV mini (V1) with the sx130 chip.

 

[HDMontana]

OP -- after firing, does the screen dim really low or does it stay on (bright) until it goes to sleep?

That's the most irritating thing about the IPV mini (V1) with the sx130 chip.

Mine dims down when power button is not being pushed. Stays dim until goes to sleep or power button is pushed again.

HD

 

[Slackitude]

I've got one on order from Element Vape as well. $43, can't go wrong. I was considering an SX Mini but at less than one quarter the price, this seems much more reasonable.

 

[HDMontana]

I've got one on order from Element Vape as well. $43, can't go wrong. I was considering an SX Mini but at less than one quarter the price, this seems much more reasonable.

Nice. Let us know if you have any power button rattle after using it for a day or so. I could have sworn that the videos I watched on it, said that there was no rattle to the buttons. Maybe I got the only one.

HD

 

[Slackitude]

I'll keep an eye out for the button rattle when mine arrives Thursday.

 

[Garemlin]

I've got one on order from Element Vape as well. $43, can't go wrong. I was considering an SX Mini but at less than one quarter the price, this seems much more reasonable.

That is a great price considering it comes with a silicone sleeve. That is an extra $8 with a Vaporshark.

Tap'd from my LG G3

 

[ddarlington24]

I really like this one nice device as for what chip it has. I bet it's sx130 it has the PWM and the same delay when scrolling through the wattage exactly the same as ipv mini v1(sx130) and also seems to buck on initial fire .5 sec then settles on the set wattage.