small cartomizer tank

[tepicky]

I'm looking for a cartomizer tank for a regular sized carto. approximately 15 mm in diameter because i don't want it to be wider than my PV. The j-tank is a little big and it sits funny on my PV.

Do these exist? i currently use the 3.5 ml smoktech dual coil tank, but i prefer boges over dual coil cartos or the 1.7 ohm ones.

any help would be much appreciated! thanks

 

[ckim111]

How about a clearomizer from got vapes. They carry many different varieties

 

[oplholik]

Chibi Tanks
Carto Tank Mods

 

[Dieseler]

I hear many good things about the Chibi tank although i do not use those but from same site i buy the acorn tanks which use a ce2.
Either way those products priced well in my opinion .

 

[Beans]

Look up how to make a syringe tank..... I don't remember where the video is, but I'd think googling it will show up something. You can make one yourself for around 3 bucks and no special tools needed. Super easy and really nice.

 

[tepicky]

How about a clearomizer from got vapes. They carry many different varieties

I've tried their fluxomizers, I wasn't a big fan :/

Chibi Tanks
Carto Tank Mods

for 8 bucks, that tank looks worth looking at, I'll email them to ask for diameter.

Look up how to make a syringe tank..... I don't remember where the video is, but I'd think googling it will show up something. You can make one yourself for around 3 bucks and no special tools needed. Super easy and really nice.

I made one, actually, and it worked perfectly fine. but to refill them you have to use a syringe. Is there a better way to refill? wait, lemme google that

Thanks for all the replies!

 

[tinstar15]

You could buy one of the 3ml narrow dct tanks from madvapes and trim the clear portion down until its the right height for a standard carto. They aren't much wider than an ego battery.

 

[tepicky]

You could buy one of the 3ml narrow dct tanks from madvapes and trim the clear portion down until its the right height for a standard carto. They aren't much wider than an ego battery.

Yea I have those ones. But what do I use for trimming?

 

[aziffel]

Yea I have those ones. But what do I use for trimming?

A tubing or small pipe cutter or use the 1.7ohm resurrector(smoktech single coil 1.7) and not cut the tank

 

[tinstar15]

Yea I have those ones. But what do I use for trimming?

My bad, not sure how I missed that in the OP.... the plastic tube is much thinner than conventional tanks so all you really need is a decent hobby knife or box cutter. I used masking tape to mark the edge so that I'd be able to keep the cut straight. Used a cheapy marker to support the inside of the tube.

 

[tepicky]

My bad, not sure how I missed that in the OP.... the plastic tube is much thinner than conventional tanks so all you really need is a decent hobby knife or box cutter. I used masking tape to mark the edge so that I'd be able to keep the cut straight. Used a cheapy marker to support the inside of the tube.

I did what u suggested with my smoktech tank. Though not perfectly cut, I still love it for the simple fact that I can use my boge cartos. Thanks!