smok box micro

[joshua bursill]

hello i recently bought a smok micro online as i was having problems with my old ecig. The new ecig (smok micro) seems to be very harsh with the liquid i am using this may be due to the settings which i am using or not i was wondering if anyone could help with why this or help with the best settings for this ecig.

Thank you

 

[D. Waterhouse]

The easiest way to find out is to turn it all the way down and take a puff, turn it up a little and take another puff, repeat until you get a vape that you like. If it gets unpleasant, turn it down a little.

 

[joshua bursill]

The easiest way to find out is to turn it all the way down and take a puff, turn it up a little and take another puff, repeat until you get a vape that you like. If it gets unpleasant, turn it down a little.

could be the best bet but it has settings for temp and watts so whats best thing to do there?
Thanks for the reply

 

[D. Waterhouse]

That depends on your coil. Nickel, Titanium, or Stainless Steel use temp control. Kanthal or Nichrome use wattage.

What do you have for a topper?

 

[joshua bursill]

its just the standard kit with the TFV4 tank

 

[D. Waterhouse]

Sorry for the delay, buddies bachelor party friday.

What mg juice are you using?

With a set-up like this you'll want to lower your nicotine to at most 6mg and alot of people run at 3mg or lower.

 

[ScottP]

What nic lever are you using? High nic juices can taste harsh in those tanks at high power.

 

[joshua bursill]

What nic lever are you using? High nic juices can taste harsh in those tanks at high power.

i purchased a 0mg and yet it is still very harsh sorry for the slow response

 

[ScottP]

Well then that's not it. If you can at all control how close/far the coil is from the air intake, that can sometimes make a difference as well. This is of course assuming you are building coils and not using prebuilt ones.

 

[Train2]

The "standard kit" (if there is such a thing...there may not be) seems to come with an installed 0.3 ohm fused clapton coil.

The above advice holds - start with the watts fairly low, and slowly move up until you're happy.
BALLPARK watts for a 0.3 ohm coil? Maybe 45 to start?

ALSO - what were you using before?
That kind of coil/watt setup expects to have a fair amount of airflow. If you're used to something with a very tight draw, and have the tank airholes closed down, that could be part of it.

hello i recently bought a smok micro online as i was having problems with my old ecig. The new ecig (smok micro) seems to be very harsh with the liquid i am using this may be due to the settings which i am using or not i was wondering if anyone could help with why this or help with the best settings for this ecig.

Thank you

 

[joshua bursill]

The "standard kit" (if there is such a thing...there may not be) seems to come with an installed 0.3 ohm fused clapton coil.

The above advice holds - start with the watts fairly low, and slowly move up until you're happy.
BALLPARK watts for a 0.3 ohm coil? Maybe 45 to start?

ALSO - what were you using before?
That kind of coil/watt setup expects to have a fair amount of airflow. If you're used to something with a very tight draw, and have the tank airholes closed down, that could be part of it.

thank you for your help i was informed early in this forum that it could be due to the nic levels in the eliquid as it turns out this was the case i tested it today with a 0% and it works just fine so thanks for all your help you have been great