SMOK RSST or AGA-T?

[bzmotoninja83]

Im finding the cap on my RSST seals good,but the cap wants too come off if i just push on the side,its annoying.Im starting too like my AGAT2 better now,even tho the nut on the center post is hard too work with.

I had that issue with mine. I took the o-ring from a carto tank and put it on there. The cap is a nice tight fit now. Almost annoying when i have to take the cap off

Sent from the 804

 

[hadouken]

i prefer the rsst. i have owned both and sold the aga t2 i had. imo the rsst hit better. looked better and was easier to wrap. i ran a 2-3 coil with 400 mesh on both and to me the rsst kicked ...

+10000. I've owned both too and the rsst is much easier to set up. I had hot spots galore with the AGA. Rsst, barely ever. I like the RSST even more than the $140 Z-Atty Pro.

 

[bzmotoninja83]

Agreed. The only way i was able to run my aga is sub ohm. Currently running 0.8 ohm either with twisted 32ga kanthal or 0.8mm x 0.1mm kanthal ribbon. Tried setting up with regular 32ga kanthal and no matter what I did, the top coil was always hot.

Sent from the 804

 

[Heavyrocker]

I had that issue with mine. I took the o-ring from a carto tank and put it on there. The cap is a nice tight fit now. Almost annoying when i have to take the cap off

Sent from the 804

I found a fix,the reason why the top cap ''woobles'' is because the orings are a tad big,not much,id say 5 thousands/in,i just rubbed a very fine sandpaper inside the cap too make is a tad ruff and smaller,fits SOLID as a rock now,like its glued on

 

[rlamprich]

From what I see here the rsst seems to be the clear winner for newbie builders

 

[Heavyrocker]

From what I see here the rsst seems to be the clear winner for newbie builders

I wish this RSST was around before i got the AGA,that tank almost put me in the mental hospital

 

[Tenzo]

I prefer RSST