smok Scar-18 TFv9 Kit 230W
The evolution of the "Scar" species continues with this beautiful IP67 mod from smok, someone will not wait to object that it looks like the Legend, but let's leave the very personal comments that someone could make, personally I find rather than the Scar-18 is basically an intelligent and elegant evolution in the "Big Battery" theme of the small and familiar Pod Aio IP67 Scar-P3 and Scar-P5, from which the Scar-18 takes its graphics with the very successful cocktail of rubber / leather materials and the unmistakable textures of metal superstructures.
The body of the device has an IP67 protection rating, which means that it is resistant to dust, shocks, waterproof and resistant for 30 minutes if immersed in water between fifteen centimeters and one meter deep.
The IQ-X chipset according to Smok has a stable output and exceptional efficiency, the kit uses two 18650 batteries, produces a maximum power of 230W; uses the functions of variable power and temperature control (Ni, TI and SS).
The newly developed TFV9 Tank comes with two 0.15Ω V9 Meshed Coils designed for DTL vaping.
Note: the complete line of V8 Baby coils is compatible with the TFV9 Tank Standard of this test.
Packaging:
Frontally, the cardboard box shows the brand name, the IP67 icon, the device name and an indication of the color of the product.
On the back are the warnings.
Some of the main features of the kit are shown on the side in the form of an icon, the packaging content, the manufacturer's address, hologram, Scratch & Check, bar code, logos and brands.
Standard Kit Content:
1- Scar-18 Mod
1- Tank TFV9
1- Coil V9 Mesh from 0.15Ω range 40-90W (pre-installed)
1- Coil V9 Mesh from 0.15Ω range 40-90W
1- Spare Bubble Pyrex
1- USB cable
1- Certificate of originality
1- Battery warning card
1- User manual
Smok Scar-18 Kit Specifications:
Dimensions: 88x54x30.6mm
Output: 1-230 W (VW) - 10-230 W (TC)
User mode: VW, TC (Ni, Ti, SS), TCR
Batteries: 2 × 18650 (not included)
Display: 0.96 inch TFT color screen
Supported resistances: 0.10-2.5ohm (VW) - 0.05-2Ω (TC)
Temperature range: 200-600 ° F / 100-315 ° C
Micro USB 5V / 1.3A
IQ-X chipset
Waterproof, dustproof and shockproof
Leather and zinc alloy construction
Smok TFV9 tank specifications:
Materials: Stainless Steel
Dimensions: 28x56mm (standard) - 25.5x50mm (EU version 2ml)
Weight: 62g
Capacity: 6.5ml (standard) - 2ml (TPD version)
Air flow: Adjustable
Compatible coil range: Coil V9 + Coil V8
Upper refill cap: Childproof
Pin 510: gold plated
Available color combinations:
How the Smok Scar-18 is made:
The design of great aesthetic impact is derived from the small Scar-P3 / P5, the structure of the Gun-metal frame wraps the soft leather inserts with precision. Metal, leather and rubber complement each other, without a doubt a new fashion and a perfect fusion of the elements.
The body of the Scar-18 weighs 187gr and is (as on the Scar-P3 / P5) meticulously designed to be portable and easy to use. Its compact design contributes to an elegant and gritty appearance.
On the first of the two sides you can see the two finely burnished French screws that hold the protective metal structure and the engraved with the wording Scar-18.
The other side is characterized by the wording "Smok", by two other French support screws and by the USB socket protected with a rubber cap to protect against any infiltration of liquid or dust.
The evolution of the "Scar" species continues with this beautiful IP67 mod from smok, someone will not wait to object that it looks like the Legend, but let's leave the very personal comments that someone could make, personally I find rather than the Scar-18 is basically an intelligent and elegant evolution in the "Big Battery" theme of the small and familiar Pod Aio IP67 Scar-P3 and Scar-P5, from which the Scar-18 takes its graphics with the very successful cocktail of rubber / leather materials and the unmistakable textures of metal superstructures.
The body of the device has an IP67 protection rating, which means that it is resistant to dust, shocks, waterproof and resistant for 30 minutes if immersed in water between fifteen centimeters and one meter deep.
The IQ-X chipset according to Smok has a stable output and exceptional efficiency, the kit uses two 18650 batteries, produces a maximum power of 230W; uses the functions of variable power and temperature control (Ni, TI and SS).
The newly developed TFV9 Tank comes with two 0.15Ω V9 Meshed Coils designed for DTL vaping.
Note: the complete line of V8 Baby coils is compatible with the TFV9 Tank Standard of this test.
Packaging:
Frontally, the cardboard box shows the brand name, the IP67 icon, the device name and an indication of the color of the product.
On the back are the warnings.
Some of the main features of the kit are shown on the side in the form of an icon, the packaging content, the manufacturer's address, hologram, Scratch & Check, bar code, logos and brands.
Standard Kit Content:
1- Scar-18 Mod
1- Tank TFV9
1- Coil V9 Mesh from 0.15Ω range 40-90W (pre-installed)
1- Coil V9 Mesh from 0.15Ω range 40-90W
1- Spare Bubble Pyrex
1- USB cable
1- Certificate of originality
1- Battery warning card
1- User manual
Smok Scar-18 Kit Specifications:
Dimensions: 88x54x30.6mm
Output: 1-230 W (VW) - 10-230 W (TC)
User mode: VW, TC (Ni, Ti, SS), TCR
Batteries: 2 × 18650 (not included)
Display: 0.96 inch TFT color screen
Supported resistances: 0.10-2.5ohm (VW) - 0.05-2Ω (TC)
Temperature range: 200-600 ° F / 100-315 ° C
Micro USB 5V / 1.3A
IQ-X chipset
Waterproof, dustproof and shockproof
Leather and zinc alloy construction
Smok TFV9 tank specifications:
Materials: Stainless Steel
Dimensions: 28x56mm (standard) - 25.5x50mm (EU version 2ml)
Weight: 62g
Capacity: 6.5ml (standard) - 2ml (TPD version)
Air flow: Adjustable
Compatible coil range: Coil V9 + Coil V8
Upper refill cap: Childproof
Pin 510: gold plated
Available color combinations:
How the Smok Scar-18 is made:
The design of great aesthetic impact is derived from the small Scar-P3 / P5, the structure of the Gun-metal frame wraps the soft leather inserts with precision. Metal, leather and rubber complement each other, without a doubt a new fashion and a perfect fusion of the elements.
The body of the Scar-18 weighs 187gr and is (as on the Scar-P3 / P5) meticulously designed to be portable and easy to use. Its compact design contributes to an elegant and gritty appearance.
On the first of the two sides you can see the two finely burnished French screws that hold the protective metal structure and the engraved with the wording Scar-18.
The other side is characterized by the wording "Smok", by two other French support screws and by the USB socket protected with a rubber cap to protect against any infiltration of liquid or dust.