Smok TFV4 and TC wires

Status
Not open for further replies.

alecs.chiriac

Full Member
Jan 21, 2016
8
0
31
Hi there. I'm currently vaping using a Cuboid mod paired with a TFV4. The coil I use is the pre-built quad at .15 Ohm. I use this combination mostly for cloud chasing.

However, I'm really interested in trying out TC with this mod and TFV4. I am willing to build my own coils, but first I wanna try out the pre-built coils made by smok.

My options for TC are Ni200 at .12 or Ti at .33, both dual-coil build. Which one do you actually recommend me for cloud chasing? It's not necessarily that I will continue to use the same material, but right now I am not sure which would produce bigger clouds.
 

GeorgeS

Ultra Member
ECF Veteran
  • May 31, 2015
    2,266
    3,534
    Oregon, USA
    I have 4 TFV4's currently in service, 3 full size and one mini. While I've never used the factory coils that came with the tanks, I regularly use the single and dual RBA's that are optional (some kits come with the single coil RBA)

    I've used 24-28AWG Ti, NiFe48/52 and SS430 coils along with ether Silica rope (2.5 or 3.5mm) or cotton for wicking. I like to have the wick inside the juice channels and cut off at the 'gutter' on the RBA.

    The air flow available on the TFV4 is awesome in my opinion. I find the single coil RBA meets my needs although I do have one dual coil RBA currently in service.

    To get the most resistance for use in a dual coil configuration I'll use 28AWG Ti. With the temperature turned up it can really drink up A LOT of juice. The deck on the single is fairly large for a removable deck (it has almost as much room as a Lemo2) so fairly large coils can be built in it.

    Have fun.
     
    Status
    Not open for further replies.

    Users who are viewing this thread