Smoke teck Natural problems. Please help !!

[Anthony_Rella]

So I took my natural apart to sand down the contacts and it was very easy came out great. Until I tried putting it back together I went to screw the post that the switch comes out and touches back into the screw that touches the bottom of the battery and I guess I went a Lil too tight and I snapped the threads off the post in the end of the screw. . Has this happened to anyone yet ??? Dines anyone know where I can get something to replace that screw and post part. My natural is rendered useless until I can figure something out.
Any help would be greatly appreciated.

 

[muzichead]

You might try possibly a local hardware store like ACE that has a pretty big selection of fasteners. Try contacting the vendor you bought it from and see if they have any spare parts for it. That should be a good starting point!!

 

[Anthony_Rella]

Thanks muzichead. Will do. Hoping someone else had this problem and has a fix for me. Lol.

 

[TroyHoot]

can use a solid brass rod(could even use copper). will have to cut several if you use different size batteries though. Most hardware or even some craft stores will have it in 3' sticks for fairly cheap.

 

[stillnotsmoking]

I'd get a brass machine screw same length as the rod, a flat washer and a nut for bit, replace the rod with it using the nut and washer to hold bit in place, reuse the spring, that's what I'd do. Then plastic insert screws out (gently) to make bit easier.

Sent from my DROID RAZR HD using Tapatalk 2

 

[Anthony_Rella]

That's a great idea. That kinda what I was thinking. Where do u think I can get that stuff.

 

[-brandon-]

Studiovape went with a solid post in his customization of the Natural. He ended up with one pin that would fit 18650 and 18350 and a second pin for using 18490. Here's a link to the post...
Smok Natural DID Hybrid & Upgrade

 

[Anthony_Rella]

thats a great post,, now i just have o figure out where he got the post for the switch.. thanks a lot man