Smoketech DC Tank problems...

[Sines]

http://www.myvaporstore.com/SMOKTech_510_Dual_Coil_Tank_Combo_p/510dct.htm

So, I ordered a Smoktech DC tank for my Vision Spinners and it leaks from the second I put it on.

Also the drip tip I got with it doesn't fit into the carto. It's too large of a circumference.

Highly disappointed. Any thoughts?


Sent while poopin'

 

[Baditude]

Your link isn't leading directly to the tank you bought. Can you edit your post with the correct link? Also the drip tip you ordered would be helpful.

Where is juice leaking from the tank? From the carto connection, or someplace on the tank itself?

How did you fill and assemble the tank?

Did you use a method like this? http://www.e-cigarette-forum.com/forum/blogs/baditude/3710-5-cartomizer-tank-setup.html

 

[xtwosm0kesx]

I would assume he's referring to this one:
SMOKTech Pyrex DCTank Glass DCTank

Regarding the drip tip, if it will go in partly you may need to get a different o-ring, if it wont go in at all, its too large for the carto unfortunately.

 

[Sines]

Your link isn't leading directly to the tank you bought. Can you edit your post with the correct link? Also the drip tip you ordered would be helpful.

Where is juice leaking from the tank? From the carto connection, or someplace on the tank itself?

How did you fill and assemble the tank?

Did you use a method like this? http://www.e-cigarette-forum.com/forum/blogs/baditude/3710-5-cartomizer-tank-setup.html

Sorry, edited link.

It's leaking from the cart onto the battery. I used the exact method that is shown in the video on that same page.

I used the drip tip that was supplied with it.


Sent while poopin'

 

[Baditude]

You STILL poopin'? You got problems.

Anyway, it looks like it "should" be a decent quality cartotank. My only thoughts are you must have inadvertantly gotten some juice into that center air hole while filling the cartomizer. I always put a wood tooth pick in it to keep out juice.

Turn the tank upside down so that the carto's wick holes are in the air space of the tank. Blow out the carto from the bottom side in an attempt to blow out the juice in the air hole. Turning the tank upside down and doing this prevents additional juice from inside the tank from entering the carto. If this doesn't work, the carto is likely irrepairably flooded and ruined.

Not sure what to make about the drip tip not fitting. Contact MVS about your issues. I've never had a problem with their customer service before.