- Status
As long as they are listed as Authentic, you are good to go!
Not speculation, this is from Smok's website;Potential vertical and quad RBA's. Still speculation.
In the future:
TF-N2 NICKEL 200 AIR CORE
TF-T2 STANDARD CORE
TF-T2 AIR CORE (WITH MORE AIR HOLES)
TF-TI TITANIUM CORE
TF-R1-V VERTICAL RBA SINGLE CORE
TF-S6 SEXTUPLE CORE
Sent from my XT1032 using Tapatalk
Here; TFV4 NICKEL 200 Standard Core Is Coming Soon--SMOK® Being with you for all great vaping time!
Sent from my XT1032 using Tapatalk
And here's a look at the TF-RCA "Clapton RBA" This pretty much looks like the one deck to get, if you can only get one, in terms of versatility. Very much like a Kayfun V4 deck, only better.
HOW TO BUILD THE RBA
1、Before starting make sure your hands are clean.
2、Taking TF-RCA core apart.
TF-RCA comes with two build screws on each side, one side is the plus terminal of the deck and the other is minus terminal. This provides more possibility for you to install your coil exactly and comfortably.
3、The kit includes a small airflow tip that can be placed onto the central airhole of the Rebuildable Clapton Atomizer deck. It is designed for throat hit vape by reducing the airflow.
4、Installing the pre-wrapped coil. Place the coil (it can be Clapton coil or others) between the screws and wrap the ends around them and tighten up. Attention: The coil has to be wrapped with one end at the plus terminal, with the other end at the minus terminal.
5、Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base. Then cut the exceeding ends of wire off.
6、Cutting a strip of cotton and make sure it’s not too much and not too less.
7、Inserting the cotton, and placing it in the middle.
8、Cutting the cotton at an angle and make sure it’s not too short and not too long.
9、Wet the coil with your e-liquid and adjust the cotton.
And here's a look at all the heads they're planning:
TFV4 Mini - SMOK®
HOW TO BUILD THE RBA
1、Before starting make sure your hands are clean.
2、Taking TF-RCA core apart.
TF-RCA comes with two build screws on each side, one side is the plus terminal of the deck and the other is minus terminal. This provides more possibility for you to install your coil exactly and comfortably.
3、The kit includes a small airflow tip that can be placed onto the central airhole of the Rebuildable Clapton Atomizer deck. It is designed for throat hit vape by reducing the airflow.
4、Installing the pre-wrapped coil. Place the coil (it can be Clapton coil or others) between the screws and wrap the ends around them and tighten up. Attention: The coil has to be wrapped with one end at the plus terminal, with the other end at the minus terminal.
5、Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base. Then cut the exceeding ends of wire off.
6、Cutting a strip of cotton and make sure it’s not too much and not too less.
7、Inserting the cotton, and placing it in the middle.
8、Cutting the cotton at an angle and make sure it’s not too short and not too long.
9、Wet the coil with your e-liquid and adjust the cotton.
And here's a look at all the heads they're planning:
TFV4 Mini - SMOK®
So..............why 4 screws on a deck for one coil?
Same reason the Kayfun V4 has them.
Using the diagonal screws, you get a cleaner, less deformed build that's less hassle to center over the air hole than with the typical decks that have two parallel screws, especially if you use long coils.
Makes it simpler to do dual inline builds.
Plus it's great for just getting more leverage/more mechanical contact in a single coil build by wrapping the legs around both screws on both sides.
And, it doesn't restrict you to left hand or right hand wraps (though the Subtank Mini style deck has the same advantage).
Added bonus, it's just a great place to store extra screws.
I thought I read that there was going to be a quad RBA, I may have gotten confused with the Clapton one.
I need the Clapton RBA.
Sent from my XT1032 using Tapatalk
You have so many problems Shawn - lol - why not just buy another rack? I think its going to be a great mod to have!!
With all the coils out for this tank and if you didn't build them - what ones would you buy? I know hard question because most of you build but I am going to buy a couple packs and I don't know what I want!!
I've heard of people complaining about the triple coils causing the bottom rubber gasket to melt, you may want to look into that.
Sent from my XT1032 using Tapatalk
Buy another rack? That'd be a great idea, but the rack wouldn't fit on my desk. Buying another desk won't help because I can't fit another desk in the living room. Buying another living room... ya... you do the math
You need a man cave, man.Buy another rack? That'd be a great idea, but the rack wouldn't fit on my desk. Buying another desk won't help because I can't fit another desk in the living room. Buying another living room... ya... you do the math
Sent from my XT1032 using Tapatalk
These rba decks are like pokemons, got to have them all. Where to buy from? the latest one or they are not out yet? Is this rba only for mini?
TFV4 and TFV4 Mini use the same heads, 100% compatible with each other. I expect Smok will get around to updating the original TFV4 page with the new heads eventually.
- Status
Similar threads
