Don't seem to have one. Just stops producing clouds around 3.11v but never seems to cut off. Am I missing something?
Snow Wolf Mini 75w cut off voltage?
- Thread starter Gramdogg
- Start date
- th_trl_thread_readers 0
- Status
Sounds like it cutting off to me.. what are you expecting to happen?
3.11 sounds a bit low. Most mods stop before going that low. I'd be pulling my batts at 10 to 25%.... I like to charge at 3.4 to 3.5 volts.
Sent from my SCH-I605 using Tapatalk
3.11 sounds a bit low. Most mods stop before going that low. I'd be pulling my batts at 10 to 25%.... I like to charge at 3.4 to 3.5 volts.
Sent from my SCH-I605 using Tapatalk
My LG stops producing clouds at 3.04v but the APV still don't cut off. Allows me to keep vaping if I want.
My Evic wouldn't let you use it that low. Battery Low warning comes on and shut it down around 3.1v, obviously this don't have a cut off feature or its to low to bother getting to.
If mod has amp limit low resistance protection... it might wait for the amp limit to shut down. Idk only have had 1 regulated mod it shuts down at 3.2 I think.
Sent from my SCH-I605 using Tapatalk
Sent from my SCH-I605 using Tapatalk
I guess its safe just not good for cycle life. 25R was all the way down to 2.82v after resting a day but the Smok Alien runs them all the way down to 2.8v before cut off kicks in.
Safe enough at least.. just as long as you stay well below the tested 20to22 amp rate of the 25r. Personally I'd be changing in batts before that limits kicks in....
With recharging at 3.4 volts I have gotten almost 3 years out of a couple of my 25rs..... they get used in a 4 battery rotation in single batt mod. Using 1 to per day. Got 3 of the dreaded efests running in my mechs for longer.
Sent from my SCH-I605 using Tapatalk
With recharging at 3.4 volts I have gotten almost 3 years out of a couple of my 25rs..... they get used in a 4 battery rotation in single batt mod. Using 1 to per day. Got 3 of the dreaded efests running in my mechs for longer.
Sent from my SCH-I605 using Tapatalk
Yeah I'm only running like 5A. Thats my thinking, it will just get less charges because it is charging more each time... makes sense.
I run in the 5 to 10 amp range.....
The solution is more batteries and a charger... that way you don't wait for charging.. you lso save wear and tear on the USB port and circuitry.
I usually have 1 battery in the mod 1 on a charger 1 sitting on the shelf and 1 in my pocket (or wife's purse with my juice). About every 2 tanks of juice they swap positions.
Sent from my SCH-I605 using Tapatalk
Yeah I have one in use while 2 charge and oldest as a back up for power outages or to finish off a day if not enough time to charge left in it.
Thats reassuring, Mooch confirmed our thoughts. Safe all the way down to 2.5v just you'll get half as many charges at 2.8v then say 3.5v for the obvious reason, its charging twice as much each time.
- Status
