So I am curious, which mg is the most popular?

[Cactus Breath]

I started at 24mg, moved to 18mg fairly quickly, then eventually dropped to 12mg and have hung there for quite a while (even when I transitioned to the REO as my all day, every day device). I tried dropping to 6mg a few months ago and found myself vaping almost frantically, so I went back up to 12mg. I just ordered some more 6mg and am going to give it a try again. I don't really have a "step down strategy" set in concrete - just taking it as it comes. If I eventually make it down to 6mg or NZ, great - if not, I'm confident that even vaping 12mg is worlds better than smoking in terms of harm reduction!

[ETA:] As far as the REO goes, the RM2 (with stock airhole) is the only atty I've ever used on it. I'm so satisfied with the ease of build, flavor and vapor production that I haven't even tried any of the others. I don't run double coils or sub-ohm and am not a cloud-chaser, so the RM2 fits the bill perfectly for me.

 

[Henry Etta]

and in that case back to considering odin also contemplating squonktified magma not sure which to get

Dicsloth! <--------- That was suppose to read "do it sloth!" OOPS
Not to be completely OT, but, I get almost no flavor reduction from the Odin... and my other atty is a Divo. I have .5ohms on the Odin and .7 on the Divo. I'd go for it, sloth! I really didn't think I'd like bigger attys because I'm all about flavor, but the vape quality more than makes up for it.

Also, to stay on topic, 6mg

 

[distortoblotto]

Get the odin! It's a beast.
And...um...well...

I can slide the door up? It *barely* rubs it like a fraction of a mm but I can easily slide up or down with my thumb.

Hmm, Forgive me for asking but is that a genuine Odin? The reason I ask is that I have one that I ordered direct from Loki Labs to use on my dibi. I have tried it on a few of my LP Reo's and can only raise the door upwards 1/4 inch before it hits the bottom of the atty and will not slide up any further. I am at work now until 6am but can post pictures after some sleep tomorrow.

 

[AlexanderJ]

Hmm, Forgive me for asking but is that a genuine Odin? The reason I ask is that I have one that I ordered direct from Loki Labs to use on my dibi. I have tried it on a few of my LP Reo's and can only raise the door upwards 1/4 inch before it hits the bottom of the atty and will not slide up any further. I am at work now until 6am but can post pictures after some sleep tomorrow.

I'd be really surprised if there were clone bf odins..but this seemed legit to me..

 

[Sloth Tonight]

Dicsloth!
Not to be completely OT, but, I get almost no flavor reduction from the Odin... and my other atty is a Divo. I have .5ohms on the Odin and .7 on the Divo. I'd go for it, sloth! I really didn't think I'd like bigger attys because I'm all about flavor, but the vape quality more than makes up for it.

Also, to stay on topic, 6mg

ooo nice feedback - and ya, i imagine if im using an odin, i'll need to load up some 6mg instead of 12mg. i'd build around .5 ohms or .6 and the lowest ive ever vaped is .9

 

[Henry Etta]

ooo nice feedback - and ya, i imagine if im using an odin, i'll need to load up some 6mg instead of 12mg. i'd build around .5 ohms or .6 and the lowest ive ever vaped is .9

That was "do it sloth!" NOT dicsloth! Ha! sorry...

 

[Henry Etta]

ooo nice feedback - and ya, i imagine if im using an odin, i'll need to load up some 6mg instead of 12mg. i'd build around .5 ohms or .6 and the lowest ive ever vaped is .9

You know, I find that when dropping in ohms, but going from single to dual coil, the vape is just as smooth. And, with the larger chamber area, it's a bit cooler, too. Dropping to 6mg would help just because you'd be vaporizing more juice, but in my experience, it's not harsher. YMMV of course

 

[Sloth Tonight]

ah very good point may try 12mg first and go from there. will be abot a month before i order one but am excited to try it!

Sent from my SCH-I110 using Tapatalk 2

 

[BigSteve940]

We sell more 6 than anything, High VG 3mg sell very well too


Sent from my iPhone using Tapatalk

 

[distortoblotto]

I'd be really surprised if there were clone bf odins..but this seemed legit to me..

Yep, they pretty much clone everything these days.

I have now tried the Odin on all 6 of my LP Reo's with the same results. Even if the door did clear by slightly touching, I don't like the idea of scratching up my atty's. But hey, that's a moot point since the door can be slid down anyways. For now, I think I'll just stick to my smaller toppers which suit me just fine and produce all the flavor and vapor as the big boys. It's all in the build my friend.

Maybe we should just chalk this one up to " Your results may very" shall we?

 

[Frocket]

I was on 18 with Kanger tanks, dropped to 12mg on rebuildable tanks, and 6 on most RDAs.

Just ordered two 50ml bottles, 12mg and 6mg. I typically use 3 toppers: Fogger v5 with dual coils at 1.0 ohms (12mg), a Plume Veil dual coil at 0.4 ohms (6mg), and a Magma dual coil at 0.8 ohms. Gonna run the Magma on 9mg.

Using 6mg in the Magma now, and it just doesn't quite do it for me. Tried 12, and it was a little much now and then. Mixing 6mg and 12mg should be just about right.

Funny thing is, favorite "stress" vape would have to be the Plume Veil w/6mg. Running 60 watts through the 24 gauge kanthal dual coils at 0.4 ohms and a couple deep lungers cuts off cravings real quick.

 

[Sloth Tonight]

frocket 1) i love your name 2) i love "lunger" great term ive actually been enjoying lungers myself recently even on an rm2 with airholes only drilled to 1/16th...never used to lung it, but man, yeah, i think i enjoy it now

 

[baronvoncardo]

I use 12mg/ml in my tanks and 6mg/ml with my RDAs.

 

[NightSky]

I vape 12 to 18 depending on what's available. I started on 6 but the throat hit wasn't quite heavy enough for me.

 

[AlexanderJ]

Maybe we should just chalk this one up to " Your results may very"

Actually did some more investigation and it turns out, it's the reo, not the odin!
It doesn't bother me at all, but the 510 connection seems to be somehow a fraction of an inch off center..probably a slight misalignment in the jig that was milling mine.
Come to think of it, it's convenient to be able to slide the door up or down with 22mm attys on it!
Even Rob's mistakes are brilliant!

 

[distortoblotto]

Kind of like a dimple on your cheek, it just adds a bit of character....

 

[StacyInOkla]

I use 18 mg in my tanks and 12 mg for drippers. Some I order in 12 cause that's the highest offered. Others I order 6 mg to mix down.