So i got bored and built a box mod
- Thread starter glockshooter
- Start date
- th_trl_thread_readers 0
- Status
This actually looks very well. Does it work similar to VMU with screw adjustment? Could not make it out in the second picture. Can it display resistance or just voltage?
I would actually be interested to purchase one like that if you ever decide to make more.
I would actually be interested to purchase one like that if you ever decide to make more.
It is similar to the VMU with the screw adjustment. It only shows voltage like the vmu as well. I have to order some new battery boxes so maybe next week..The problem is cutting a square hole accurately
Same here....I never could find one that would allow the back to properly fit. I'd like to use one of those down the road
I've used that chip a half dozen times and none of mine looked like that. Even if you cut the aluminum "shell" off, they didn't look like that
Nice looking job there. You may want to nail those wires down with a little hot glue though. My evercool mod started acting up the other day, and come to find out that ground wire was wiggling around causing intermittent contact. I fixed it, hot glued everything in solid and no more problems. I also changed from stranded wire to solid.
Thanks guys! I used the 10 watt version though Minus. Same one Jolly uses in his VV mods .. Its tight it there so you have to spend hours on one.. Ive been vaping on this PV for a few days. Wanted to make sure everything ran smooth before gluing the rest down. Look for them in the classified section as soon as more boxes come in.. I just do this as a hobby.. Im not happy with the square hole so i need to find a thinner blade and probably a tinted piece of thin Plexiglas instead of clear.I think it would make the meter a little dimmer and give a much nicer effect. BTW I use 801 connector because i like 801 cartos..Id rather have the extra room in the box and use a smalled 801-510 if i wanted too.
Cheers guys
dude that box looks sick!
did you end up putting that plastic over the meter like i was talking about? looks like it but not sure.
did you end up putting that plastic over the meter like i was talking about? looks like it but not sure.
You mean you chose the 1A version?
As a Joye atty user I often use about 2 1/2 times that.
between the tekk mod running at 2 amp and the warbox running 1amp i really dont even notice much of a difference. if its not hard core enough you can bump up the voltage, or if need be, swap chips.
Yea but even just cruising along at a medium voltage with my Joye atties I will be asking the reg to run at twice what it was designed for. They only time I would be within it's rated output would be if I chose to vape at 2.2V.
- Status
Similar threads
