solid fasttech rbas?

[vjc0628]

I ordered the Igo-l 2 of them from fastteck
as far as rsst, fastteck is $25

I got the aga T2 here in the usa $25 at empre mods, Empire also has the smokteck rsst $25 also and you don't have to wait 3 weeks

 

[Thrasher]

been using the trident for about a week now and its a beast. running duals @.9 ohms and kapow.

there is a lot of steel in this atty it is heavy and solid and the airholes are right where they should be and the flow control works perfect. impressive for 16 bucks

 

[Kemosabe]

That's the one I'm eyeballing. I really like the fact that the air goes through the channels at the bottom of the deck and comes up through two air holes under the coil. With the slotted wire connection, round wire would be just as easy. Using it here at home, I probably wouldn't even bother with putting the outer sleeve on, although I can see were it might make it more leak proof.

I dint know that about the air channels. I'm kinda kicking myself for not ordering one. I just made an order the other day for a gold trident but it hasn't shipped. Maybe ill see if I can add it in before it ships.
But I'm also eyeballing that fogger/foggerV2

 

[JD1]

I'm kinda kicking myself for not ordering one. I just made an order the other day for a gold trident but it hasn't shipped. Maybe ill see if I can add it in before it ships.

If it hasn't shipped you can cancel, pick a certificate, order what you want and apply the certificate. At least that's what I read somewhere on their site.

(in case you don't really want both of course).

 

[Thrasher]

Maybe ill see if I can add it in before it ships.

with free shipping just place another order lol

 

[calisun]

Atty is important as mod itself...

I ordered

I Atty, Trident clone and Immortalizer clone.

Now I have most common atty setup.

I atty for on the go.. While driving (Don't drip and drive) - Not sure if I will be doing dual coil or single coil 28g

Trident for Cloud making (This will be dual coil setup - Quad is just too much for me and fast battery drain)

Immortalizer as single coil for TH n flavor - I hope.. $45 bucks for all. Not bad at all. All review seems promising.

 

[Kemosabe]

Atty is important as mod itself...

I ordered

I Atty, Trident clone and Immortalizer clone.

Now I have most common atty setup.

I atty for on the go.. While driving (Don't drip and drive) - Not sure if I will be doing dual coil or single coil 28g

Trident for Cloud making (This will be dual coil setup - Quad is just too much for me and fast battery drain)

Immortalizer as single coil for TH n flavor - I hope.. $45 bucks for all. Not bad at all. All review seems promising.

Those three were what interested me too. I got the iAtty and think its pretty great. Needs a bigger air hole though. My trident isn't here yet and I haven't yet ordered the immortalizer but I want it. Let us know what you think of it.

 

[vapero]

I got an I-Atty, IGO-L and V5 from fasttech

the I-atty doesn't thread well on my zmax v3 and that's my only mod besides the egos, so I'll ship it back and get something else

the IGO-L didn't make contact with my mod's center pin, after a hard time trying to adjust it it worked great!
on both the IGO-L and the V5 I drilled the airhole to 1/16 and re-wicked with a microcoil and cotton ar 1.4 ohms, holds about a mil of juice each, the taste, throat hit and vapor are really impressive, this are becoming my all day devices as I don't have to drip as often as my phoenix v3 this do last me a while, when driving I take both RDAs and if I need to drip again I just rotate between them. I'm returning my I-atty and going to get a few more rdas and driptips.

o now about the driptips... the stock one with the IGO-L feels great, is like you don't have it in your mouth, the slim section fits really great on the lips but I don't really like the look.

I don't know why but the IGO hits harder than the V5

 

[Kemosabe]

I got an I-Atty, IGO-L and V5 from fasttech

the I-atty doesn't thread well on my zmax v3 and that's my only mod besides the egos, so I'll ship it back and get something else

the IGO-L didn't make contact with my mod's center pin, after a hard time trying to adjust it it worked great!
on both the IGO-L and the V5 I drilled the airhole to 1/16 and re-wicked with a microcoil and cotton ar 1.4 ohms, holds about a mil of juice each, the taste, throat hit and vapor are really impressive, this are becoming my all day devices as I don't have to drip as often as my phoenix v3 this do last me a while, when driving I take both RDAs and if I need to drip again I just rotate between them. I'm returning my I-atty and going to get a few more rdas and driptips.

o now about the driptips... the stock one with the IGO-L feels great, is like you don't have it in your mouth, the slim section fits really great on the lips but I don't really like the look.

I don't know why but the IGO hits harder than the V5

It likely hits harder due to the placement of the coil in relation to the air hole.

I got a trident on the way from ft. Can't wait to get that puppy rippin. That immortalizer has my name in it too I think.

 

[Thrasher]

i found with the v5 i had to kind of extend the legs a little to bring the coil closer to the side/edge, also the larger topcap on the v5 will help temper or mellow the vape a little but it still putting out big smooth clouds.