The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.
  1. Hi Guest! 

    Seasons Greetings. Just to let you know that a new giveaway has just started. 

    This one's from our friends at Humble Vape Co. and I hope you'll take part for a chance to be one of the ten winners of their great prizes. 


    See our giveaway page for full details. This one's for US residents only. 

    Good luck! 


    Dismiss Notice

Some evic mod questions

Discussion in 'eVic' started by dropped9, Feb 14, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. dropped9

    dropped9 Full Member

    May 17, 2013
    Couple of questions for you guys.

    Can the top piece above the head be screwed off so something like a kayfun can be screwed on and mounted flush?

    Also where can I get a smaller body tube that will fit the 18350 battery?

    Anybody mod theirs like this?

  2. humpstyles

    humpstyles Ultra Member Verified Member ECF Veteran

    Dec 14, 2013
    The metal portion above the control head can be unscrewed which would just leave the eGo/510 threading post in the open. There are a few suppliers out there that provide different top-caps (I believe that is what we eVic owners call this piece) to look prettier with different toppers. I just bought one off of eBay from someone who bought it from Joyetech, but the silver is brushed and does not match the polished look of the eVic. It still looks nice with any 22mm+ 510 topper.

    Joyetech has them on their site, eBay has a bunch of them, and there are a few higher end models scattered throughout these sub forums. I know eVic owners like Siam Mods 18350 tube. I had my eyes on a gorgeous telescopic mod for some time, called the Madcat Sphinx v2. A bit pricey, but would fit a 18350 and looks ridiculously cool. Even if you search google for "eVic 18350", you'll get some good results.

    I'll post a few pics of my eVic with the new upgrades once I get my juice stash in and make a new build for my RSST.
  3. sdennislee

    sdennislee Super Member Verified Member ECF Veteran

    Nov 23, 2012
  4. jchamb2

    jchamb2 Senior Member Verified Member ECF Veteran

    Oct 8, 2013
    Cleburne, tx
    The Kangers and Kayfuns fit fine with the top cap (beauty ring) on there. I use a Kayfun most of the time on mine.

    The thing to watch out for with the Evic is screwing the atomizer down too tight. After pressing my center post down too far, I finally got it fixed with the "#60 O ring" fix, and now things are working again. Now I'm careful to just screw my Kayfun until it shows "atomizer detecting" on the screen, then gently unscrew the top cap until it's tight against the bottom of the Kayfun (or Kanger).
Thread Status:
Not open for further replies.

Share This Page