Some weird stuff going on???????

[Ace777]

Hey guys don't know what's been going on here but freaking me out lol ....


So I have pack new 5 kanger heads all there resistance checks out at 2.2ohms but ..... After few days of using the tip the resistance is up to 3.2 ohms ? How is this happening past month had 3 kanger pt heads do this , 2 nova 2.4 heads and few ce4+ heads all do this ????? Don't know why this can be , few them went from 2.2 ohms and week later the resistance went up to 4.2ohms ...


i double tripple checked on a zmax segelei , vamo 3 and also my daily itaste vv v3 let me hear your thoughts guys


thanks

 

[Ace777]

Any ideas guys ?

 

[StarsAndBars]

Sounds crazy. Have had coils do this, but not such a dramatic change, and not so consistently. Are these dual coil?

 

[VapieDan]

This may be way off but a guess. Could the liquid somehow be coating the coil in some way changing the resistance? Try different liquid(s)? This is a very strange one.

 

[CreepyLady]

A pretty gunked up coil would be my guess. How often are you giving it a rinse with hot water and are you using fairly dark eliquid (or sweet - especially if you notice it turning from golden to brown goo in the tank)?

 

[StarsAndBars]

Gonna say it ain't the liquid or dirty coils. Don't think either of these would change the resistance of a coil. Not familiar with the kanger heads but I'm guessing they are dual coils yes? Sounds like a QC issue. I'd contact the vendor straight away.

 

[CreepyLady]

Gonna say it ain't the liquid or dirty coils. Don't think either of these would change the resistance of a coil. Not familiar with the kanger heads but I'm guessing they are dual coils yes? Sounds like a QC issue. I'd contact the vendor straight away.

Standard Protank heads are singles

Edit- newest PT3 are duals - So OP - whatcha got? PT1,2 or 3

 

[Ace777]

They are actually the single coils for pt2 , and ce4+ were duals and the nova were both single an dual so I've had tem all Change in me it's weird ... Actually the evod bcc head I put in few days ago resisted at 2.3ohm and is now 3.5ohms ???? Not sure if it's juice don't think would be it's pretty basic diy ry4 I make and can't be dirty couls because they are new and few days later this will happen