Specifications/interchangeability

Status
Not open for further replies.

normuser

Full Member
Jun 28, 2011
14
1
texas
Hello,

Is there a list of specifications for electronic cigarettes and carts somewhere?
Like dimensions/thread sizes.
A lot of e-cigs seam to be knock-offs of each other, like the batteries I have now, one charge will last all day, but the only carts sold locally are pre-filled, no empties. And since its a no name knockoff there is nowhere to order from. Now that said I see carts and batteries online under a multitude of different names that all look identical to this one.
If specifications were available I'm sure I could find empties that would fit.

I have an "e cigarette", green/white package, comes with usb charger and two carts for ~$10, refill carts come in packs of five for ~$10, the only one available at tobacco shops and gas stations, instructions are on back of package and are illegible, only comes in one flavor "regular high".
My measurements are bellow:
Cartomizer threads: 1/4"-40 Threads Per Inch. (Cart is male, Bat is female) (measured by tape measure and my eyes, take with requisite salt);
Cart length w/o threads: 1-3/8";
Cart length W/Threads: 1-1/2";
Cart Diameter: 3/8";
Bat Diameter: 3/8";
Bat length W/little plastic tip that covers led/sensor: 1-5/8";
Cart + bat length: 4";

If anyone knows what carts might fit this I would greatly appreciate it, and even if you don't I think a list of specifications could come in handy, so whats yours?

Thanks,
normuser
 

normuser

Full Member
Jun 28, 2011
14
1
texas
Ask and you shall receive:p
Jun28_001.jpg Jun28_002.jpg Jun28_003.jpg
Jun28_004.jpg Jun28_005.jpg.
"you may only upload five files per post" says the little boxy:glare:
 

Critter Man

Super Member
ECF Veteran
Feb 7, 2010
397
79
Minnesota
From the picture, i guess it's a "e-health electronic cigarette". I don't know for sure what type, but i'm pretty sure it's not a 510.

Looks like a 510, measures like a 510, I'm fairly sure it's a 510 clone. I can see why you thought e-health, the green color, but it's not the packaging pictured on their site. It's not e-health. If someone can be sure, it would be nice if they spoke up.

To the OP: some clones out there in the world use reversed polarity, but they usually have a brand name on them so you know who to buy stuff from. Not a problem for attys and cartos, but don't try another 510 charger on your batts until you know for sure what's going on. I'm really surprised that no one has posted more info, you have fairly decent pics for identification.
 

Critter Man

Super Member
ECF Veteran
Feb 7, 2010
397
79
Minnesota
I found references to the packaging, but it hasn't cleared up this issue yet. The cartos came from A&D Industries Co., Limited in China. I would believe 4081 as that is a more common generic model, but the manufacturer makes cartos for a wide variety of models: "We have disposable atomizer/cartomizer that compatiable with 510, ego, 4081, 901, 103, 808D-1, etc." I'll believe RN4081, that makes perfect sense.

This is my source: Rn4081 Disposable Atomizer - China 4081 Disposable Atomizer,4081 Cartomizer,Cartomizer in Health Care Appliance
 

normuser

Full Member
Jun 28, 2011
14
1
texas
Thank you all,

The package in Alac's link is visually the same package as mine.
In further searching I have seen references to this super e-cigarette as both a 510 and an RN4081, as an example here are carts for RN4081 claimed to fit the super e-cigarette RN4081 (Njoy NPRO or SmokingEverywhere Gold)

Also while my batt from the picture does have four holes, it only came with two.
When I first got it there seamed to be a little to much resistance when taking a drag, So I immediately went for the dremel and added two more.
Yes, I void warranty's. Nasty habit, I know:blush:
It looks like I'll just have to get a cheapo cart for each and see which fits.

Thanks,
normuser
 

Nicko

Super Member
ECF Veteran
Dec 1, 2010
555
207
China
It looks exactly the same as the first e-cig I bought from a Chinese pharmacist. It barely worked and I needed to change the battery six times a day, but I could see the potential. I went online, did some research and bought an eGo which was about a thousand times better, now I'm waiting for an even better one to come in the mail.
 

Critter Man

Super Member
ECF Veteran
Feb 7, 2010
397
79
Minnesota
Also while my batt from the picture does have four holes, it only came with two.
When I first got it there seamed to be a little to much resistance when taking a drag, So I immediately went for the dremel and added two more.

Grrrr. I was fooled by a Dremel! The four holes was why I said 510! All good though, probably a 4081. If it is, you'll likely switch to a more common thread like a 510 anyway.
 
Status
Not open for further replies.

Users who are viewing this thread