Squonk Porn!

Ruben41771

Senior Member
ECF Veteran
Apr 19, 2019
131
350
43
South Africa, Cape Town
Ahh crap, i really like the middle one, thought would run a wanted ad some where but yea seems they are very rare and special then if they where privately made.
Well i will just have to drool over the pic then :(
 

Ruben41771

Senior Member
ECF Veteran
Apr 19, 2019
131
350
43
South Africa, Cape Town
The middle one is one of a kind and I have the feeling you would have to pry it from his dead cold hands. I commissioned it but wasn't using it anymore so sold it to someone that would use and enjoy it.
Well i don't blame him it is some thing really unique.
It's a shame i haven't vape that time others wise i would also had one :)
What inner parts did you use or is it all " self made " ?
Something i would like to try with it if i was ever the owner and didn't know what inner parts it had, is like buy a original pulse and use some of the inners if it would be an update but the frame and everything else i wouldn't touch, really something very nice and one of a kind to not screw around too much with it.
 

drewburton48

Senior Member
ECF Veteran
Feb 14, 2015
92
338
61
Hornsea,UK
I have the newer ultem one. I do feel a tiny bit of give when I squonk, but it doesn’t unseat the door or make any odd noises. Might be because I have smaller hands, not as strong. I like it because it’s pretty light weight for a dual. Unlike the Topside dual - which I also like, but that’s a coffee table vape. It’s just too much to lug around.

Vape descriptions are a little like real estate descriptions, one has to interpret. When a guy says a mod feels substantial, I read it’s heavy as a boat anchor.
Loving my new drone 250c, I went for boring old stainless/black.
I'm finding it really difficult reinstalling the squonk bottle after filling [emoji19].....any tips?

Sent from my LYA-L09 using Tapatalk
 

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,612
63,136
toledo ohio
Loving my new drone 250c, I went for boring old stainless/black.
I'm finding it really difficult reinstalling the squonk bottle after filling [emoji19].....any tips?

Sent from my LYA-L09 using Tapatalk


I’ve found most bottles are different to reinstall at first. They seem to loosen up a bit over time though. But you could try squonk refill bottles also. I have a vandy vape and a stentorian, and I found s 5 pack of coil father on fasttech- haven’t used those yet but I hear good things. I have not used any of them with my drone yet, but they work for all my other squonkers.
 
  • Like
Reactions: drewburton48

Alexander Mundy

Ribbon Twister
ECF Veteran
Verified Member
Apr 1, 2013
4,408
26,100
Springfield, MO
Well i don't blame him it is some thing really unique.
It's a shame i haven't vape that time others wise i would also had one :)
What inner parts did you use or is it all " self made " ?
Something i would like to try with it if i was ever the owner and didn't know what inner parts it had, is like buy a original pulse and use some of the inners if it would be an update but the frame and everything else i wouldn't touch, really something very nice and one of a kind to not screw around too much with it.
Either I miscommunicated, or you misunderstood. I commissioned (convinced and paid) Pdib to make it. I did do the final sanding and polishing but I do not have the equipment or wherewithal (patience) to have figured out how to have machined it without crazing the plastic. Pdib is "the man, the myth, the legend" that made those mods. I 3d print my "daily driver" mods, more "up my alley" being a life long geek.
 

Rossum

Eleutheromaniac
Supporting Member
ECF Veteran
Verified Member
Dec 14, 2013
16,081
105,233
SE PA
The middle one is one of a kind and I have the feeling you would have to pry it from his dead cold hands
Do you think the people who own the other two would give them up any more easily? :?:

I 3d print my "daily driver" mods, more "up my alley" being a life long geek.
Hmm.. Clear ABS filament is available, but it's never going to give the glass-like appearance of that mod.
 
  • Agree
Reactions: classwife

Alexander Mundy

Ribbon Twister
ECF Veteran
Verified Member
Apr 1, 2013
4,408
26,100
Springfield, MO
I have "clear" PETG, ABS, TPEE, and PLA. The FDM process leaves voids between the extruded lines and layers and it turns out optically milky white. This one has had a lot of on the job abuse.

FfpAd9l.jpg
 

B2L

Vaping Master
ECF Veteran
Verified Member
Jan 14, 2012
7,844
45,313
Jacksonville, FL

Rathamar

Super Member
ECF Veteran
Verified Member
Sep 15, 2013
719
1,866
Mound - Minnesota, USA
Loving my new drone 250c, I went for boring old stainless/black.
I'm finding it really difficult reinstalling the squonk bottle after filling [emoji19].....any tips?

Sent from my LYA-L09 using Tapatalk

I pull the tube out a bit when i go to put the bottle back in. I have found this works the best.
 

Rossum

Eleutheromaniac
Supporting Member
ECF Veteran
Verified Member
Dec 14, 2013
16,081
105,233
SE PA
Love the shape. Interesting switch design. Basic and functional.
That switch design was a stroke of genius. It gets the make/break contact away from the battery, meaning no more pitted battery ends; it allows both sides of the contact to be solid silver, which is one of the best materials for high-current switch contacts, and allows for contact maintenance without any disassembly. I've been running a wooden one (the dark one on the right in the lineup of three) as my ADV mod for 3-1/2 years now.
 

bask

Super Member
ECF Veteran
Dec 17, 2012
561
3,016
The Euroneous Zone
That switch design was a stroke of genius.
That it awesome! I’m quite bummed most of these genius inventions are done across the pond. I mean, if I want to order a Modmaker kit for a basic 3D printed squonker it’s also already 38 bucks with shipment.

I should see it as an investment, considering possible future regulations though.
 
  • Like
Reactions: Eskie

Alexander Mundy

Ribbon Twister
ECF Veteran
Verified Member
Apr 1, 2013
4,408
26,100
Springfield, MO
Kinda sort of an RM2. I converted the old triangle atomizers (which were for vaporizing other stuff) into RM2s same as Rob except he had some special 510 center pins. I drilled out the solid ones that came with them and actually prefer to make the squonk hole on the right instead of the left. Wish those triangles were still available, I only have 3 or 4 virgin ones left and the China manufacturer told me several years ago they quit making them. Still my favorite atomizer.
 

Alexander Mundy

Ribbon Twister
ECF Veteran
Verified Member
Apr 1, 2013
4,408
26,100
Springfield, MO
Yeah, the triangles were $9.95 here in the US and $2.5 to $4 depending on how many straight from China. Should have bought a bunch. No fuse. The creator of the Lil Pinch asked that I not share the files I created for it, and as a good friend I respect that.
 

Users who are viewing this thread