Stainless steel CE2 XL's

[Silent Soldier]

Is ANYONE in stock on these things? I've been looking everywhere for over 2 weeks now & nothing. I can't even order them direct from China, the e cig fair website is borked. I'm seriously starting to get peeved. I need 2.4 & 3 ohm.

 

[six]

Kens box mods has your 2.4 to 2.5 CE2 XL steel tube (gotta peel the sticker off them to get a clean cut if your pipe cutter is getting warn out) and Vapor Junction has the 3.0 ohms.

Edit: if you find 2.8 ohm ce2XLs anywhere, please post back to this thread. I'll appreciate it. My MAP tank is about to get shelved due to having no CE2.

 

[Nomoreash]

Vaporjunction has some 3ohm in stock.

 

[PKZap27]

Here is a good resource for CE2's.

http://www.e-cigarette-forum.com/fo...cartomizers-usa-master-list-12-27-update.html

 

[Silent Soldier]

I've tried every vendor on that list. They're either sold out, only carry black, or list no info at all about the color / ohm rating. Vaporjunction does indeed have 3ohm in stock but I need 2.4 as well and I would rather not pay S&H twice for something I should be able to get in one order from one vendor.

 

[PKZap27]

I've tried every vendor on that list. They're either sold out, only carry black, or list no info at all about the color / ohm rating. Vaporjunction does indeed have 3ohm in stock but I need 2.4 as well and I would rather not pay S&H twice for something I should be able to get in one order from one vendor.

You could order the black ones, just peel the black sticker off of the tube and you end up with steel ones.

 

[Silent Soldier]

You could order the black ones, just peel the black sticker off of the tube and you end up with steel ones.

How does that affect the diameter? I'm getting these for MAP tank & syringe mod replacements. The smallest deviation in the diameter could mean the difference between a good seal & a leaky mess.

 

[PKZap27]

How does that affect the diameter? I'm getting these for MAP tank & syringe mod replacements. The smallest deviation in the diameter could mean the difference between a good seal & a leaky mess.

The Black CE2's have the same diameter as the Steel CE2's, once the sticker is removed.

I use the Black CE2's (after I peel off the sticker) on my MAP Tank and never had an issue or a leak.

Make sure you clean any glue (from the sticker) off of the CE2 tube prior to pressing the CE2 into the bottom derlin cap of the MAP tank.

I leave the sticker on the tube while I cut it, leaving the sticker on makes it easier to mark were to cut it and prevents the tubing cutter from leaving any marks on the tube. I then peel off the sticker and clean the tube on the CE2 with some rubbing alcohol and I'm good to go.

 

[mwa102464]

CE3 will soon be out and replacing the CE2 I think

 

[SudokuGal]

Silent, i have some black XLs that you can have if you decide to peel off the sticker. PM me if you want them.