Stuffing question

[Lancepants]

So I bought a big sheet of stuffing for my cartridges. I know that when you cut a piece its supposed to be a little bit wider than the cartridge but how long am I supposed to cut each piece?

 

[Hellen A. Handbasket]

Lance we all struggle a bit with cutting just the right size. Just eyeball it, use tweezers to grab it (so you aren't stuffing the cartridge, but moving the filler down into the bottom of the cart while gripped by the tweezers, when you hit bottom let loose of the tweezers) and cut off any excess flush with the top of the cart.

If it doesn't wick well or take in plenty of liquid, you've probably got too much in (use an old piece for comparison). I'll use a very small dropper bottle to suck back out liquid and cut some of the stuffing off when that is the case.

 

[Lancepants]

Someones gotta know, my starter kit came with some and it was already at the perfect length. If anyone has some that comes with a joye510 starter kit and could tell me how long it was I'd know.

 

[Hellen A. Handbasket]

Lance, you are making this harder than it has to be, lol.

Use a wire, tweezer or something stuck down in the empty cart to measure if you really feel you need to.

Otherwise, just stuff the cartridge, and trim off any excess. Way easier!

 

[RjG]

You want to trim the stuffing to be just a tiny bit bigger than the cart, just enough so it doesn't fall out.

Basically, the looser and fluffier the stuffing, the easier liquid can wick out of it.

PS - Most vapers immediately pull a fair amount of stuffing out of pre-made carts too, so they can wick properly.