hey i was wondering if anyone could help me out. i just ordered my first box mod. i ordered a ipv4 100 watt box mod and got the atlantas aspier v2 with 0.3 ohm coils. i was wondering what is the highest wattage setting i should use to still have good taste n without frying the coill.. can anyone help me?
sub ohms to watts
- Thread starter cobatronz
- Start date
- th_trl_thread_readers 0
-
- Tags
- sub ohm safety
- Status
Hello and welcome.
Start low and turn it up till you like the taste, if your coils fine then you have your answer.
Easy Peasy No one else can really judge what your taste will be, just make sure the battery your using is sufficient.
Start low and turn it up till you like the taste, if your coils fine then you have your answer.Easy Peasy No one else can really judge what your taste will be, just make sure the battery your using is sufficient.
The coils should have a recommendation on them. I'd make sure the coil was juiced up, then start at the low end and work up slowly. If it tastes a bit burnt, back off. If a coil was rated, say, 15-30 watts, start at 15. don't fire it immediately at 30.
The 0.3 ohm coil is rated for between 70 and 80 watts. When I used the 0.3 ohm coil in the Atlantis 2, I generally kept it between 50 and 70 watts. While it is definitely vapable at 80 watts, it was just too warm for my taste. The bottom of the tank heats up quite a bit, especially if you start chain vaping.
- Status
Similar threads
