subox mini mod can't fire billow v2?

[macis]

after making 5 attempt to build the coil on billow v2, i finally got it right. three times the Ti1 wire snapped, 1 time the kanthal snapped. got it rite on another kanthal attempt.

26g 8wraps 2.5mm 4.9ohm. purposely use so many wraps so my subox mini mod can read the tank, as i can then switch around with my ipv3 li. then i realised my subox read at 9.90ohm on the billow n i can't fire it at all. i have to use my ipv3 li to fire it.

anyone had the same experience?

 

[cloudysheep]

How come your ohm so high?
Shouldn't it be something like this...

 

[laminated_tissure_paper]

Whao, that it super useful.

 

[macis]

How come your ohm so high?
Shouldn't it be something like this...

haha.. pasish paiseh, its 0.49ohm haaa..

i wonder if it's becos the tank couldn't connect with the mod. u know can i screwed the screw beneath the tank?

 

[macis]

just found a post about the same problem on another reddit: Kanger Subox (KBOX Mini) Warning (510 pin, same issues as KBOX) • /r/electronic_cigarette

 

[xqae24]

9.9 ohm is when kanger can't read your atomizer

 

[macis]

9.9 ohm is when kanger can't read your atomizer

yup, i realised there's many others having the same problem. i think its becos of the subox doesn't use a spring loaded 510 pin, but a fixed one.

 

[xqae24]

Yeap. Happens to me too when I used the Kbox. All I did was tighten or losen my tank and see if it manages to read my atomizer.

 

[macis]

Yeap. Happens to me too when I used the Kbox. All I did was tighten or losen my tank and see if it manages to read my atomizer.

i did that, it can't read my billow tank. but it can still read the subtank mini though.

 

[Distrion]

could be ur 510 connection pin has a problem, as a old subbox user ive been told tales that subbox mini mod cant use many tanks and drippers because of the 510 connection. just try playing around with the 510 pin u should be alright (thats what i did for my RDA)

 

[macis]

could be ur 510 connection pin has a problem, as a old subbox user ive been told tales that subbox mini mod cant use many tanks and drippers because of the 510 connection. just try playing around with the 510 pin u should be alright (thats what i did for my RDA)

the billow v2 510 connector is shorter than the subtank mini. either its becos my subox 510 pin is too low after prolong usage or must be the 510pin is not spring loaded n thus couldn't connect to the billow. i'll just have to use the subtank with the subox for now.