Suggestions for my RDA Setup.

[Sask]

Hello ECF! I am fairly new to vaping as a whole. I have messed around with my MVP 2 VW and pretty well every type of clearo out there. My most recent purchase however is my rda and Mech.

This is my first attempt at building, and to be honest its really nice. I get a decent amount of vapor, and lots of taste.

What I am looking for is just some short term pointed advice for the equipment and guage of wire I am currently using to maximize vapor and taste. Of course I can upgrade parts and mods later, but I would like to make the best of what I have now. Please feel free to be critical, that's the best way to learn.

Current Build:

Atty: Stillare Clone

Coil: 28 gauge kanthal - 7 wraps around 1/16th bit

dual coil - .6 OHM

Battery: IMR 18650 - 2000mAh

Mod: sigelei Mechanical

and Organic Cotton of course.

 

[Sthur]

Nice setup, I run dual 28 with 5/6 wraps around a 5/64 bit at 0.5 ohms with great vape on my patriot.

I would get a sony battery, but can't tell that a lg? If you go lower get a 30amp battery.

 

[bm2112]

When I use 28 gauge, I like to use 5 or 6 wraps. It will improve the vapor by a decent margin. Also, you need to fix your wicking. I tuck a small piece of cotton underneath the coil to make sure as much juice is touching, while leaving the top exposed to the air. This will also help you get better flavor and vapor.

 

[p7willm]

a .6 load on the battery is closer than I would like to get to the max amps. I would bet a better,more amp, battery.

 

[Sask]

When I use 28 gauge, I like to use 5 or 6 wraps. It will improve the vapor by a decent margin. Also, you need to fix your wicking. I tuck a small piece of cotton underneath the coil to make sure as much juice is touching, while leaving the top exposed to the air. This will also help you get better flavor and vapor.

One youtube video I was watching today mentioned that you should leave a space under the coil to provide airflow. Which is what I attempted to do in this build. Ill give it a try filling it in and with one less wrap on each coil

 

[Sask]

Nice setup, I run dual 28 with 5/6 wraps around a 5/64 bit at 0.5 ohms with great vape on my patriot.

I would get a sony battery, but can't tell that a lg? If you go lower get a 30amp battery.

Just ordered two Sony us18650vtc4 2100 mAh 30amps