Advice on building an rda

Status
Not open for further replies.

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,694
68
Mpls/St.Paul, MN
If you hoover over PGA (it has a dotted line under it) you will see that PGA is pure grain alcohol. You could also use any drinkable alcohol.

Dish soap will not dissolve any machine oil left in the RDA from machining. Most RDA's/RTA's need to be thoroughly cleaned before using. I usually soak for 1/2 hour in PGA, scrub with a brush then wash with dish soap and rinse.

Give it a try and see if this makes a difference.
 

ReigntheGamer

Account closed on request
ECF Veteran
Oct 14, 2014
5,979
26,132
2 juices came from the same vendor and one i have been vaping on all week and it tastes perfect in fogger and aspire but horrid in the dripper

Like the others mentioned it could just need a good cleaning, but I have a juice that was great in tanks higher ohm build but nearly unvapeable in different coil builds/ohms.
 
Status
Not open for further replies.

Users who are viewing this thread