Super T Precise 18

[arry]

Not going to go into soppy , mushy , caressing mode over this ..
As at the end of the day its a replacement for a Cigarette not a Tag or Rolex.

Engineering 9/10
Good and well engineered would have been a 10 but for what looked like Lathe chuck marks on it .

Switch 5/10
It works , problem is it works when in you pocket in your shirt pocket , I do note that it does actually say the HORNS only HELP prevent from going off , so fine if your sat at a desk all day , otherwise its a pain in the backside , or top of your leg in this case as it burns ..
Also found switch constantly caught on the spring causing miss fires .
P.S although super t is aware of these problems and trying to fix .

Appearance 9/10
Looks nice , not much more to say as down to personal preference

Does it work 7/10
Works with a 510 atty same as any other mod nothing special , but a 510 carto i would say no as there is no way to feed air to the bottom of a carto as connection post blocks off air hole ..
There are other mods out there that work just as good or better at less than half the price .

Price Tag 3/10
Way over priced IMHO
If it did something special it might get a 7 but it doesn't , there are mods at a 3rd of this price that work just as well or better .
Stainless steel is still quite a soft metal it still marks , but swings and roundabouts I guess its harder to mark than Ali but also Harder to polish out than Ali .

This is based on my Precise P18 .

Dont get caught up in HYPE !


Regards

 

[Goldenkobold]

Switch 5/10
It works , problem is it works when in you pocket in your shirt pocket , I do note that it does actually say the HORNS only HELP prevent from going off , so fine if your sat at a desk all day , otherwise its a pain in the backside , or top of your leg in this case as it burns ..
Also found switch constantly caught on the spring causing miss fires .
P.S although super t is aware of these problems and trying to fix .

Do you think the reason this model pocket fires is because of the relatively large diameter of the bottom button?

edit: large compared to the p16 & p10

 

[Vaporologist]

Hey arry,

You may or may not know this but you are just one PM-to-David away from having a perfectly functioning, flawless P18! Even if you bought it used, you have a life time warranty and he will do anything that needs to be done to make sure it's perfect for you. SuperT customer service is top notch and you really need to experience it. Just saying....

 

[MikeDeason]

Will work w/cartos just need a 510>510 adaptor.

 

[Vaporologist]

Btw, I just saw this post by David on the SuperT forum. I just thought you might find it useful, if you are looking for the resolution.

http://www.e-cigarette-forum.com/forum/super-t-manufacturing/169753-response-arrys-p18-review.html

Hello Arry,

This is in response to your P18 review. I’ll PM you a copy too, in case you miss this post.

I am sorry to hear you are having problems with your Precise. This is the first I’ve heard from you that you are having any problems with it and I hope you will give me the opportunity to correct them for you, free of charge. In checking my records, neither I nor my distributors sold a new one to you, but regardless, I stand by my product, new or used.

First, you said that there are chuck marks on the unit: Please know that I offer a free lifetime polishing on my units and would be happy to remove those for you. Please know that I would never knowingly send out a new unit with chuck marks/scratches, dents etc, I take great pride in my finish work and all units have the finish polish, assembly and inspection done by me and me only. Also, my units are not chucked on the finish polish, they are put in a jig that is chucked and the jig holds them on the inside, thus elimating any chance of marks by the lathe.

Second, on the catching button spring. This only applied to a few P18 units and did not effect the P16 or P10 and has been corrected for several months now. It is a simple fix as I only need to machine a few thousandths off the inner diameter of the spring chamber. Again, I will be happy to fix this for you.

As far as some brands of cartomizers having a harder draw, which brand are you having trouble with? I have many customers who use cartomizers without trouble, however, if there is a certain brand that is too tight for you, I can machine an air slot in your center post, free of charge of course.

Do know that I have also designed a locking button for the Precise that will be available shortly and is a direct drop in for the P16 and P18 J I can't help but curious though, you emailed me several months ago with many concerns about it not having a locking button and i had advised you it didn't and wasn't a good fit for you due to your concerns, yet, you apparently went ahead and acquired one anyway?


Just let me know when you’d like to send it in to make the corrections and I apologize for the inconvenience.
　
Send to:
Super T
Box 331
Sauk Rapids, MN 56379 USA

 

[arry]

Do you think the reason this model pocket fires is because of the relatively large diameter of the bottom button?

edit: large compared to the p16 & p10

Possibly , or that it needs to be locking would be better.

 

[arry]

Why should I need an adapter ??? Others dont

 

[MikeDeason]

The 510>510 adaptor will give you more airflow for cartos.

I dont need one but you said you weren't getting enough airflow.

 

[arry]

The 510>510 adaptor will give you more airflow for cartos.

I dont need one but you said you weren't getting enough airflow.

If you block off the bottom hole you wont get any air flow ,
Why should i need an adapter on $164.94 item
I'm not saying it wont work but for that price I want it to make the tea .. (thats a joke by the way before you all start quoting me )

 

[Vaporologist]

If you block off the bottom hole you wont get any air flow ,
Why should i need an adapter on $164.94 item
I'm not saying it wont work but for that price I want it to make the tea .. (thats a joke by the way before you all start quoting me )

I have used Boge cartomizer and currently use Ikenvape cartomizers on my P16 and P18. I have not experienced any air blockage problems at all, since the bottom of my cartos sit slightly higher than the opening in the adapter, so I can't help you with that problem. But one person who can and wants to help you is David. I'm just curious, why haven't you contacted him yet? Are you really interested in solving these problems or are you just interested in discussing them with those incapable of helping you?

I am a huge fan of common sense. What you are doing here makes no sense to me at all... Anyone else?

 

[arry]

I have used Boge cartomizer and currently use Ikenvape cartomizers on my P16 and P18. I have not experienced any air blockage problems at all, since the bottom of my cartos sit slightly higher than the opening in the adapter, so I can't help you with that problem. But one person who can and wants to help you is David. I'm just curious, why haven't you contacted him yet? Are you really interested in solving these problems or are you just interested in discussing them with those incapable of helping you?

I am a huge fan of common sense. What you are doing here makes no sense to me at all... Anyone else?

what carto are you using 510, 808 etc.. ??

 

[Vaporologist]

what carto are you using 510, 808 etc.. ??

I actually use both 510s and 808s but I was specifically referring to 510s due to relevancy to your problem and 510s obviously don't require an adapter.

This is just a thought but maybe your brass center pin in the adapter is pushed in a little and not positioned high enough resulting in the bottom of the carto covering the hole in the adapter. If not, I know for sure that David can make the hole in the adapter slightly wider for you which will obviously solve the problem.

The only thing I know for sure is that David's customer service is second to none. The man is obsessed with perfection. I'm sure that certain things can slip through the cracks but once he is aware of the problem, he will fix it and make it perfect. I know that for a fact.

 

[progg]

I am a huge fan of common sense. What you are doing here makes no sense to me at all... Anyone else?

No. I remember arry. He posted (months ago) his concern about the Precise design at the SuperT sub.

He was trying to sell SuperT his idea on "improving" their product . He also tried to sell another supplier his idea on their product.

Now, some time later, he's bought a P18. What's it all mean?

 

[progg]

Well -- I looked over some of arry's posts at SuperT and GG. It seems that arry (if he exists) is playing dirty pool.

If I'm wrong I apologize. Is there a rational explanation for your (if you exist) behavior?

 

[aziffel]

Sounds to me like someone likes to b--ch about things they don't intend to do anything about.
I have P18650,P16340 and they are both flawless!

 

[Vaporologist]

No. I remember arry. He posted (months ago) his concern about the Precise design at the SuperT sub.

He was trying to sell SuperT his idea on "improving" their product . He also tried to sell another supplier his idea on their product.

Now, some time later, he's bought a P18. What's it all mean?

You know I stay away from drama, but I got involved in this thread only because what's happening here doesn't make any sense at all. And yes, I recall the thread you are talking about. The bottom line is: I'm not gonna talk to my dentist about my car troubles. I couldn't understand why he is writing this review talking to potential SuperT customers rather than talking to the person who can easily solve the problem, if it exists. I see that David offered to cover the international shipping charges to get the P18 back to SuperT to get it fixed. I'm curious to see what happens...

 

[progg]

You know I stay away from drama, but I got involved in this thread only because what's happening here doesn't make any sense at all. And yes, I recall the thread you are talking about. The bottom line is: I'm not gonna talk to my dentist about my car troubles. I couldn't understand why he is writing this review talking to potential SuperT customers rather than talking to the person who can easily solve the problem, if it exists. I see that David offered to cover the international shipping charges to get the P18 back to SuperT to get it fixed. I'm curious to see what happens...

The only reason I saw this thread is your name popped up on the front page. I've never seen you provide anything but your honest (more exuberant than me lol) evaluation.

To be clear -- I don't currently own a Precise.

I prefer honest battles to sneak attacks.

 

[arry]

No. I remember arry. He posted (months ago) his concern about the Precise design at the SuperT sub.

He was trying to sell SuperT his idea on "improving" their product . He also tried to sell another supplier his idea on their product.

Now, some time later, he's bought a P18. What's it all mean?

You are talking out of your .... mate I have never tried to SELL anything to a Supplier .
Get your facts Right and go stir some brown sticky stuff somewhere else .

Both will confirm any info I gave them was for free I DID NOT TRY TO SELL ANYTHING TO EITHER OF THEM .

 

[arry]

Well -- I looked over some of arry's posts at SuperT and GG. It seems that arry (if he exists) is playing dirty pool.

If I'm wrong I apologize. Is there a rational explanation for your (if you exist) behavior?

APOLOGIZE THEN !

Its a review nothing else , thats it end of story you are just trying to stir something up that doesnt exsist

 

[arry]

Sounds to me like someone likes to b--ch about things they don't intend to do anything about.
I have P18650,P16340 and they are both flawless!

So a review is now termed as a b--ch ??

good for your p18 and p16 mine aint