I decided to venture off and try a T3 .. what do I need to know about using them and caring for them.. Im used to the clearos.. Besides having to fill them upside down... What else?
T3 what do I need to know
- Thread starter WPsharpshooter
- Start date
- th_trl_thread_readers 0
- Status
Thats the beauty they dont need much work the only thing i do from the start is fluff the wicks and go i love them for the simplicity
Does the CE3 have a problem with leaking? That's what I was going to go with as a step up from the prefilled cartos I'm currently using. Would you recommend the T3 over the CE3?
No leaks with the T3. The CE3 produces a better taste vape, but they are so unreliable I completely quit using them. To me an ultimate set up is the T3 on a Spinner!
I use CE3s on 78mm autos for working, when my hands are busy. I use T3s on X2s and other devices. It des pay to rinse a T3 every other fill or so. Just run the head under hot water letting it got down the air tube until you see water coming out the air hole in the bottom, then do the reverse with the air hole on the bottom. Depending on what types of liquids you use, they heads can last quite a while, as in more than a month of chain vaping. I use mostly tobacco flavors without a lot of sweetness, sugars, and get excellent use out of them. If you're more adventurous (or cheap like me), they can be easily rebuilt, new coil and new wicks, which makes them last a really long time.
When unscrewing T3 from battery, pay attention and make sure you are actually unscrewing the t3 from the battery, and not the tank from the base. That was a tough, albeit sweet smelling, accident that I made at work the other day. 2.3 ml of juice all over the book I was reading on break.
Well, at least it was sweet smelling, and not like some stale ashtray soaking all over your book! Definitely some good advice about the battery vs. base/ tank.... I've heard of some horror stories in regards to that
- Status
Similar threads
