Tank Wrapping?

[Rifty]

Well, I have tried searching the site before asking, but seems maybe I just have a silly notion going on here, or it needs to be made!.. But is there a such thing as wrap materials you can use on tanks/attys? Ie, if I were to wrap my ProVari in a wood grain wrap, get a wooden drip tip from http://www.driptipdesignz.com ... I would still have these plain looking RBA's, or the garish colors of my SmokTech Pyrex tanks. I have been trying to search for a wrap material similar to the wraps offered for ProVari's (doesn't leave residue if you want to remove it), but I am having trouble finding anything on here or google. So in short, my question is... Is there something like that already, or at least a wrap material you could cut to form around tanks?

Saw one of them iHybrids I believe they were called, and just look fantastic being all flush like that... Idk, I think it would be cool to basically fully customize the look of your vape with such things like a mod wrap, tank wrap, and a drip tip to match.

 

[Nat79]

haven't seen anything like that but if you found a ego wrap that matched you could cut yourself a cool wrap(if you have better dexterity than me) sounds like a cool idea. might want to use plain paper just to pattern it out.


Sent from my iPhone
and already breathing better

 

[Vapant]

Ebay has a few rolls but you'd have to cut them yourself.

3m vinyl wrap wood | eBay

 

[Rifty]

Okay cool, thanks for the ideas, especially that paper one... Makes more sense than what I was going to attempt if I went that route . Just didn't know if there was anything of the sort out there yet. Thank you for the link to ebay as well, will help expedite the search! I believe there was another site.. Jwraps? Had one specific for the provari, but then as far as getting same material for the tank/s it might be a bit spendy to go that route. In any case, appreciate the help folks .

 

[l3oertjie]

Printed tobacco leaf image on paper, cut strips and wrapped around my ego mod. Thin clear varnish overcoat. Was long ago...

Like this:

 

[Rifty]

What did you use an an adhesive? I might try something like that out

 

[l3oertjie]

What did you use an an adhesive? I might try something like that out

Was so long ago Rifty, i think I used craft glue. Just pake sure you use a good quality paper that would not absorb moisture too quickly.

 

[Rifty]

Will do . Thanks for the idea! Dig the avatar picture, as well. Good ol' Albert!

 

[NancyB]

I have been looking (as I shop for other things) for stickers or plain pcs of paper to be used, once shapes were cut out, as stickers... saw lately that Duck Tape can be purchased in many patterns now (seen at an office supply store of all places!) -
If you look for detailing shops (for cars/racecars) I would think they might have some vinyl type printed 'pieces' that would fit our batteries and tanks being used... I've seen some awesome cars wrapped with gigantic 'stickers' advertising those places funding the 'race car'....
I've purchased a couple wraps for my evod tanks from jwraps (after sending them one of my tanks to measure and cut just right) - it took them awhile, but for the 'free offer of a tank' they were quite helpful - from the deal I got 4 wraps!! for sharing the use of a tank (which came back with some wraps for others) - They put a cool leather wrap on the tank I sent them (black ostrich?) - nice! they even wrapped the base of the Evod, besides around the tank itself. and left air holes in the wrap as well as long 'slits' for viewing the juice level inside.

Have fun with these ideas!! and come back and show us what you've done!
NancyB

 

[ruff]

not sure if they will do it, but you could always ask the folks over at jwraps if they could help you out

Sent from my HTC One X using Tapatalk 2

 

[NancyB]

Search tips: Google the terms "vinyl wraps", "vinyl skins", "Duct Tape", "sticker sheets" etc. You will find lots of places to go looking
I would think that a small pointed razor blade (exacto knife) would cut the holes or juice viewing windows out where you needed them, once the material was wrapped around a battery or a tank, and overlapped about a 1/4". Have fun and show us what you find!

I use vinyl material because it won't soak up any juice that gets on it. The new printed Duct Tape (blues & pinks sort of tie dyed look) is my favorite (grin). I even made a cardboard box covered in same tape to keep my tanks, bats and small btls of juice for easy filling on my side table. I'll take a picture and add it in here (later) of my 'wrapped' stuff.

NancyB

 

[NancyB]

To view the descriptions of these pictures (my box wrapped with Duct Tape and a couple batteries and tanks), go to my profile / photo albums / Wrapped box & bats.

In the left picture, front row, left side is the 'clear EVOD-C' clearomizer
On the right side, of left picture is a Fast Tech T32 clearomizer (both the same height, capacity, width)

 

[DetraMental]

Nicely done NancyB!!!

 

[classwife]

Moved to "Where can I get a....?" from The Modding Forum - Cosmetic Mods