Tanks and coils

Status
Not open for further replies.

Johnn1e

New Member
Apr 6, 2018
4
9
39
First of all hello to everyone, I've stoped smoking some time ago and now I am new to all this so I have a question for you experienced guys. : )
I am sorry in advance if some of the questions are ridicilous...

Anyway, I started with endura22 and I loved it, the taste is great, I could change the coils easily, started making my own juice and so on... However, then I wanted something that makes a little bigger clouds and more airflow and got myself tesla nano starter pack with h8 tank already in. I am pretty pleased with the setup, 40w are perfect for me on this first e8 0.15ohm coil that was already inside (got one more coil in the starter pack e2 0.4ohm) with airflow almost closed. After a little research, nowhere could I find where to buy those same new coils (I live in Germany) when I need to replace them. So my question is, can I buy some other kind of coils (or is that called atomizer, I mean the whole part with cotton and wires thats inside the tank) that fit in that H8 tesla tank or I must find exactly those? Or should i buy some other tank that fits too tesla nano for which is easier to find replacables coils? :)
 

ilporcupine

Ultra Member
ECF Veteran
Feb 24, 2018
1,050
4,707
IL, Duh
Hi, welcome. I imagine some one will be along soon to point you at the resources you will need. I dont see anything either in a quick search, but worst case you can always get a new atomizer/tank. Looks like it uses standard 510 connection, so just about any tank that will physically sit on there without overhang will work, and there are people here who can advise good combos. You can help them by noting which model you have, and what type of vaping you like to do, etc.
Best.
 
Last edited:

gandymarsh

Ultra Member
ECF Veteran
Verified Member
May 11, 2014
2,598
5,003
WI, USA

Izan

Vaping Master
ECF Veteran
Jul 1, 2012
8,852
15,685
Mallorca, Spain
First of all hello to everyone, I've stoped smoking some time ago and now I am new to all this so I have a question for you experienced guys. : )
I am sorry in advance if some of the questions are ridicilous...

Anyway, I started with endura22 and I loved it, the taste is great, I could change the coils easily, started making my own juice and so on... However, then I wanted something that makes a little bigger clouds and more airflow and got myself tesla nano starter pack with h8 tank already in. I am pretty pleased with the setup, 40w are perfect for me on this first e8 0.15ohm coil that was already inside (got one more coil in the starter pack e2 0.4ohm) with airflow almost closed. After a little research, nowhere could I find where to buy those same new coils (I live in Germany) when I need to replace them. So my question is, can I buy some other kind of coils (or is that called atomizer, I mean the whole part with cotton and wires thats inside the tank) that fit in that H8 tesla tank or I must find exactly those? Or should i buy some other tank that fits too tesla nano for which is easier to find replacables coils? :)
Hi and welcome,
The H8: "Compatible with TFV8 Baby coil for easy replacement"

Cheers
I
 

stols001

Moved On
ECF Veteran
May 30, 2017
29,338
108,119
Try them @Johnn1e , and you may like them more, or not.

If you have the funds to do it and you were pretty satisfied with your vape, you may want to order a box of the original coils (in the resistance you liked, if there are different ones) and if it's not supremely expensive as it will take a while to arrive, and in the meantime you can figure out if you prefer the baby beast coils.

Or, I suppose, since you know how your original coils vaped for you, try the baby beast ones and if you don't like them as much, then order some of the original coils and use up the baby beast ones while you are waiting, etc. Some coils can be quite similar, others can seem quite different and it's always good to know you can get the proprietary coils if those wind up being your favorite.

Anna
 
  • Useful
Reactions: JamesDMad

ilporcupine

Ultra Member
ECF Veteran
Feb 24, 2018
1,050
4,707
IL, Duh
  • Like
Reactions: stols001

Coastal Cowboy

This aggression will not stand, man!
ECF Veteran
Verified Member
Jun 13, 2013
5,975
21,941
62
Alabama Gulf Coast
www.ibleedcrimsonred.com
I posted this in another thread, but it may prove useful here.

Mash it.

The Baby Beast coils are notorious for having spotty quality control. If you like the coils' performance, make sure you carefully inspect each one before using. A lot of people do like their performance. The ones that work are hard to beat.
 

ilporcupine

Ultra Member
ECF Veteran
Feb 24, 2018
1,050
4,707
IL, Duh
I posted this in another thread, but it may prove useful here.

Mash it.

The Baby Beast coils are notorious for having spotty quality control. If you like the coils' performance, make sure you carefully inspect each one before using. A lot of people do like their performance. The ones that work are hard to beat.
Things like this need to be stickied in an 'info' section. It is kind of hit or miss when your new. (I is one!)
 

Coastal Cowboy

This aggression will not stand, man!
ECF Veteran
Verified Member
Jun 13, 2013
5,975
21,941
62
Alabama Gulf Coast
www.ibleedcrimsonred.com
Great info indeed for us beginners, thank you very much. :)
@stols001 Yea, I thought about doing something like that, ordering a pack of the original ones and untill they arive I am going to try some of the baby beast ones, just wanted to try out both 0.15 and 0.4 first, to see which one I like better.
If you like big clouds you'll probably prefer the 0.15. If you'd like a decent cloud but want more flavor, you'll probably prefer the 0.4 or an 0.6, even. The thinner wire/higher resistance coils will take less energy from your batteries and use less juice. The lower resistance coils will use a lot of juice and cell life, but they'll fog the room.

This is the fun part of vaping that does not exist with smoking. :) Enjoy.
 

BrotherBob

ECF Guru
ECF Veteran
Dec 24, 2014
14,118
12,449
Sunnyvale,CA,USA
  • Useful
Reactions: stols001

Johnn1e

New Member
Apr 6, 2018
4
9
39
If you like big clouds you'll probably prefer the 0.15. If you'd like a decent cloud but want more flavor, you'll probably prefer the 0.4 or an 0.6, even. The thinner wire/higher resistance coils will take less energy from your batteries and use less juice. The lower resistance coils will use a lot of juice and cell life, but they'll fog the room.

This is the fun part of vaping that does not exist with smoking. :) Enjoy.
I am more on the flavour side, but still have a lot of things to test myself, thanks for all the great comments. :)
 
  • Like
Reactions: stols001
Status
Not open for further replies.

Users who are viewing this thread