Hey so ill keep this short Ive been using my new telescope mod for awhile now but am not back to my lavatube as i just cant seem to get quite enough power out of the telescope, so anyways I did what seemed obvious and got some IMR batterys and a kick from Nhaler and figured that would solve anything, but i put it all together correctly and sometimes it works perfect for almost and hour and sometimes doesnt work at all, what happens most of the time is Ill fire the button and it goes on, then off and off and on and off and on while im holding the button, so ill shake it or tighten or loosen the mod and sometimes it helps a little but then happens again or well you get the picture, so im just wondering is this a common problem with kicking the telescope or is something wrong with the kick itself? I tried messing with the little grounding spring and doing anything else i can think of but it always happens and I just want it to work, any help would be great thanks, chuck b
- Status
Maybe it's your cartomizer,
I suggest trying a different cartomizer or a different brand and see how that works for you.
I suggest trying a different cartomizer or a different brand and see how that works for you.
Sounds like an intermittent grounding issue. Apparently there are some mods that the kick doesn't really work in.
Try cleaning the ground spring and the area it touches inside the telescope with a contact cleaner. If that doesn't work, I'd consider talking to evolv.
Try cleaning the ground spring and the area it touches inside the telescope with a contact cleaner. If that doesn't work, I'd consider talking to evolv.
its your batteries bro. the kick will "stutter" on and off like that wen battery level reaches below 3.5-.7v
Do you have a multimeter to check your batteries? What you're describing is a built in feature of the kick to tell you to change batteries.
- Status
