RDA Temple RDA

[JDC1958]

After about 24 hours, I think I have found a sweet spot for this .36 clapton coil build. I am vaping at 48 watts right now and the taste is sweet, not a harsh hit at all, and blowing thick 2 1/2 to 3ft clouds with a normal every day direct lung draw. I am not even trying to make a big cloud. This thing is amazing.

 

[JDC1958]

I just added a floating wick to my coil build on the Temple. So far so good and super easy to do. I made about a one inch square of rayon, cut it in half, then placed the halves on each side and pushed under the coils to the middle with a screw driver, I then pushed the rayon slightly away from the direct air flow area to give it just a little room there.

Upsides, its a quick re-wick, no popping, good flavour, no leaks, and good clouds. The only down side is this thing sucks the juice. This may be a good style of wick on the LEMO2 for those who get leaks and to much popping.

 

[SLIPPY_EEL]

This is 20g n80 @ 1/8th id, 0.23ohms
Been vaping it at 60w
Top pic shows how I orientate my air holes on it, this way the bottom holes are shut.
It's on rayon and is as good as it gets

 

[JDC1958]

I took a pic before i put a fancy build in, I want to try some framed staple wire I madeView attachment 520069

Finally got my temple in today. As soon as I got it I slapped some 22/32 Clapton coils on it and threw it on my sig150 tc and boy does it chuck the vapor! And the airflow is unmatched! I think I have my new all day rda here.View attachment 522142 View attachment 522143

This is 20g n80 @ 1/8th id, 0.23ohms
Been vaping it at 60w
Top pic shows how I orientate my air holes on it, this way the bottom holes are shut.
It's on rayon and is as good as it gets
View attachment 522783 View attachment 522784 View attachment 522782

Some nice coil builds! I am hoping my next one looks sharper like these cutting the corners.

 

[JDC1958]

Just got the Temple in today. This thing is huge. Put a vertical quad build in it. Nothing fancy just 9 wraps of 24g. Air flow is awesome.
View attachment 521357

Missed this one at first. That looks awesome!

 

[SLIPPY_EEL]

Not sure if they've always been available since the day of the 30mm Temple but i notice ft has some in 24mm.

 

[Logicaluser]

Not sure if they've always been available since the day of the 30mm Temple but i notice ft has some in 24mm.

Good find, seems to have been posted today
Altho... looks to be similar to the Temple Mini available elsewhere

 

[SLIPPY_EEL]

Good find, seems to have been posted today
Altho... looks to be similar to the Temple Mini available elsewhere

Rock solid drippers

 

[jhhollier]

You guys are making me want the Temple even more.

 

[Cloudspitter]

You guys are making me want the Temple even more.

I started this thread without a temple. Now I have a temple attached to the sigelei in my hand and it's my every day RDA. I HIGHLY recommend getting one.

 

[jhhollier]

I started this thread without a temple. Now I have a temple attached to the sigelei in my hand and it's my every day RDA. I HIGHLY recommend getting one.

Oh its definitely my next dripper purchase. I picked up the Nuevo which is also made by Vaperz Cloud. 23mm more of a flavor oriented atty. I'm really enjoying it. Seems pretty well made considering it only costs $45.

 

[JDC1958]

I built a vertical single clapton coil, 34/24, at .25 diameter today. Went with six wraps and It is showing .55 ohms on my Reuleaux. The hit is cool enough at 32 watts that I can chain vape and still get tons of flavour and great clouds. I am going to buy another one today.

This thing is so versatile; whether you are chasing flavour or clouds, I don't think you can go wrong with this one.

 

[MMW]

Off topic here so please forgive me, but does anyone have the Buddha mini from Vaperz Cloud?

 

[JDC1958]

Off topic here so please forgive me, but does anyone have the Buddha mini from Vaperz Cloud?

No, but it, the Buddha, the Temple Mini, Temple, and the Twisted Messes were all recommended to me by a local vape shop owner. He is a avid dripper and I do trust his opinion since buying the Temple he suggested.

I told him I liked flavour and wanted to start chasing clouds, he pretty much said I could do no wrong with any of them. The deck of the Temple sold it for me since I am just starting out building coils.

 

[Cloudspitter]

Off topic here so please forgive me, but does anyone have the Buddha mini from Vaperz Cloud?

No but I have the buddah and it is an exceptional rda. Before I got the temple it was my go-to rda for months

 

[MMW]

Thanks fellas. Didn't want to interrupt the thread.

 

[MrNobody]

What build have you guys found to be best in this? I tried a dual fused clapton (dual 24g center fused with 32g, all N80), 4mm ID between 10 and 6 wraps, started with 10 and went down to 6 and the vape was just not enjoyable and the atty got crazy hot, anything under 150w just did nothing, though for such a large build it's expected. I don't wanna discard this guy just yet. I'm looking for a good flavour > cloud build I can run between 100-160w. I also the found the o rings on the base are extremely loose and the O ring on the AFC to be tight to the point where I couldn't adjust it so I ended up removing it. I really like how big this atty is and the draw on it is nice too just want something that'll give flavor similar to the Kennedy 24.

EDIT: I wanted to add I've got 24,26,28, 34,36,38 and 40G N80. I can do fused claptons but I haven't mastered aliens, staggered or anything complex like that yet.

 

[entropy1049]

What build have you guys found to be best in this? I tried a dual fused clapton (dual 24g center fused with 32g, all N80), 4mm ID between 10 and 6 wraps, started with 10 and went down to 6 and the vape was just not enjoyable and the atty got crazy hot, anything under 150w just did nothing, though for such a large build it's expected. I don't wanna discard this guy just yet. I'm looking for a good flavour > cloud build I can run between 100-160w. I also the found the o rings on the base are extremely loose and the O ring on the AFC to be tight to the point where I couldn't adjust it so I ended up removing it. I really like how big this atty is and the draw on it is nice too just want something that'll give flavor similar to the Kennedy 24.

EDIT: I wanted to add I've got 24,26,28, 34,36,38 and 40G N80. I can do fused claptons but I haven't mastered aliens, staggered or anything complex like that yet.

Unless you're wanting to post the final build in the "Coil Porn" thread, slap 22g Kanthal dual parallels in it and enjoy the perfect goodness. If you have only the wire you listed above, use the 24g N80 to make your dual parallels.

 

[MrNobody]

Just rebuilt on this and think I nailed it. Dual twisted 24g N80 paralleled with a single strand of 24g N80, 3.5mm ID, 8 wraps. Comes out to .20 vaping at 180w and man the vape is nice and warm and the flavor is pretty good too. I also made another build that will go in here next, going to be a quad coil build, twisted 24g, 3.5mm ID 8 wraps. Looking forward to seeing how that vapes.

EDIT: I'm so impressed with how this is vaping went ahead and ordered the mini version.

 

[JDC1958]

Just rebuilt on this and think I nailed it. Dual twisted 24g N80 paralleled with a single strand of 24g N80, 3.5mm ID, 8 wraps. Comes out to .20 vaping at 180w and man the vape is nice and warm and the flavor is pretty good too. I also made another build that will go in here next, going to be a quad coil build, twisted 24g, 3.5mm ID 8 wraps. Looking forward to seeing how that vapes.

EDIT: I'm so impressed with how this is vaping went ahead and ordered the mini version.

I am feeling this way about Vaporz Cloud in general. I went into my favourite shop today to see if they had gotten any Temples' back in stock and they had not. They did have a Glacier V2 in and I bought it

I think I am going to try and buy all their drippers that have the two post deck. Man its just so easy to build for and the flavour is phenomenal. I have never been a brand specific person; name a car manufacturer or jeans maker and I have owned some, but this company is making me that way when it comes to RDA's.