Know any sites that do free worldwide shipping (or at least to Canada) that sell Sony VTC4's for ~$6?
The best 200W Mod....
- Thread starter Beefbisquit
- Start date
- th_trl_thread_readers 0
- Status
Know any sites that do free worldwide shipping (or at least to Canada) that sell Sony VTC4's for ~$6?
$10.01 Authentic Sony US18650VTC4 3.6V 2100mAh Rechargeable Li-Ion Battery (2-Piece) at FastTech - Worldwide Free Shipping
fasttech seems legit! Great prices, free worldwide shipping!
fasttech seems legit! Great prices, free worldwide shipping!
Free shipping, no. But 4 of them here to me in Texas was less than $35.
18650 Sony US18650VTC4 2100mAh High Discharge Flat Top
or here
Sony VTC4 18650 30A high drain battery 2100mAh
18650 Sony US18650VTC4 2100mAh High Discharge Flat Top
or here
Sony VTC4 18650 30A high drain battery 2100mAh
I don't know about FT for batteries. I'd hate to wait a month or 2 for them to ship and find out they were fakes. The 2 I linked above are reputable and shipping is reasonable, in the lower 48 anyway. It was like $7 for 2 day priority mail.
RTDVapor has them too, $7.65 each but no free shipping. I would much rather pay a little more for them personally and know they come from a reputable battery seller.
Is fasttech known for ripping people off? I can get x4 Sony VTC4's for less than $30 CAD.... shipped. Says it takes about 13-25 days to ship.
Says they're backordered... : /
$40 CAD for 3 batteries shipped to Canada. : / Not terrible. And if they're guaranteed not to be fake, that's nice.
I generally order from Orbtronic (2nd link). Never had a problem with them and they are trusted by many here on ECF.
yup. ordered many times from Orbtronic. no worries with that place.
Also definately wouldnt use those batts in the RX200. as stated only 15 amp batts. Id almost rather use an Efest purple... But yea, Sony VCT4, Sammy 25R or LG HB2.
Also definately wouldnt use those batts in the RX200. as stated only 15 amp batts. Id almost rather use an Efest purple... But yea, Sony VCT4, Sammy 25R or LG HB2.
Honest question. Why?
(Answers such as: "I like coils that weigh more than my atty and cool down sometime next week" are perfectly acceptable.)
I want to use coils like the stapled helix and parallel coils so I have more surface area contact with juice for max flavour! A lot of the alien wire/stapled/helix builds are super low OHM when in dual coil mode.
Is that acceptable?
EDIT: I guess I just don't want to be restricted on any build I should choose to undertake.
I think I built mine for around 50 bucks in parts... Board was 20, box was 15, pot was 3 sled was 7...Dual 26650 Box Mods & More - Lifetime Warranty | Dual 18650 Switch v2 SILENT PWM Box Mod #BCPWM
Seems expensive for an unregulated box? Got a better link?
SureI want to use coils like the stapled helix and parallel coils to I have more surface area contact with juice for max flavour! A lot of the alien wire/stapled/helix builds are super low OHM when in dual coil mode.
Is that acceptable?
Btw, art coils suck at flavor. They are good at making hot air though.
Enjoy.
Really? That's not what I've read on multiple places..... but again, I havne't used them yet, so it's all second hand knowledge.... lolSure
Btw, art coils suck at flavor. They are good at making hot air though.
Enjoy.
The way clapton coils soak up the liquid, you'd figure the flavour would be amazing. By the same logic, throw some ribbons, and some stapled clapton's together and I figured the taste would be unbelievable...
What coils/builds do you suggest for max flavour? I've using a Twisted Messes RDA so I've got lots of room, and huge post holes....
Start simple. The TM rda should work well.
Example: simple dual parallel, 28 gauge, 13 wrap, 3mm ID.
You won't get as many wraps in a TM rta but put as many as you can to fit.
Remember in VW resistance is irrelevent. Cover as much of the wick in wire as you can. You are only limited by the width of the air port. If you have a 6mm wide air port make a 6mm wide coil.
Looks sweet! Very clean.... The tiger wire I'm using now isn't very clean looking... lol I'm kind of .... that way. lol
I've got 550ft of kanthal A-1 in the mail, of various gauges. So, my options are pretty much wide open.
3mm ID, do you mean use a 3mm rod to make the coil? Sorry, I'm not familiar with the acronym. :/
On a side note; I picked up 2 bottles of E-juice today from my local vape shop..
King Kong is Maple Dipped Banana Cream donut, and Dohz Nutz is Salted Caramel glazed Cinnamon sugar donuts with candy roasted peanuts..... Both are fantastic, but my GF says the Banana one kind of reminds her of kids penicillin. lol
King Kong is Maple Dipped Banana Cream donut, and Dohz Nutz is Salted Caramel glazed Cinnamon sugar donuts with candy roasted peanuts..... Both are fantastic, but my GF says the Banana one kind of reminds her of kids penicillin. lol
- Status
Similar threads
- Locked
