~The Billet BoX~

Status
Not open for further replies.

xtreme101

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Jul 9, 2013
1,639
4,368
New York
such-a-tease-146x104.jpg
Dan~ Nice Tip :D
 

Peter_C

Who?
ECF Veteran
Verified Member
Nov 7, 2013
1,856
5,126
63
Akron, Ohio
www.facebook.com
Learned something interesting to me while cleaning my Billet Box today.

Like usual, I take everything out, wipe any juice out, etc, then using both kleenex and q-tips both with and without alcohol, I wipe everything down, and pay special attention to the tracks - normal stuff. (of course add a bit of olive oil to the tracks when done).

What surprised me was after cleaning the tank, and the billet bridge pieces, I happened to take a q-tip to the large part of the billet bridge, and got some dark gunk out??? Huh? Full rinse with hot water every time I swap heads, so I *assumed* that narrow opening was clean. So I get a q-tip soaked in alcohol, and ran it in both sides as best I could, then poured some alcohol in and let it soak a bit, and poured it out through a kleenex only to find some residue on the kleenex? In other words, it appears the inside of the billet bridge needs regular cleaning, but with how narrow the opening is, I am not sure how to do a good job of it?

FYI - maybe 30-40mls of a dark vanilla 65PG/35VG juice brought it to this point.

I am wondering about the new Sabot-DDD? Will we be able to clean the interior well?

vaping some of my limited GVC tastes very sweet at this point, possibly better than with head #3 (now on head #4). Just really surprised that a hot water rinse does not do a decent job of cleaning the interior of the billet bridge - so now what?
 

Kataphraktos

Vaping Master
ECF Veteran
Verified Member
May 1, 2013
3,241
10,032
New York, NY
Learned something interesting to me while cleaning my Billet Box today.

Like usual, I take everything out, wipe any juice out, etc, then using both kleenex and q-tips both with and without alcohol, I wipe everything down, and pay special attention to the tracks - normal stuff. (of course add a bit of olive oil to the tracks when done).

What surprised me was after cleaning the tank, and the billet bridge pieces, I happened to take a q-tip to the large part of the billet bridge, and got some dark gunk out??? Huh? Full rinse with hot water every time I swap heads, so I *assumed* that narrow opening was clean. So I get a q-tip soaked in alcohol, and ran it in both sides as best I could, then poured some alcohol in and let it soak a bit, and poured it out through a kleenex only to find some residue on the kleenex? In other words, it appears the inside of the billet bridge needs regular cleaning, but with how narrow the opening is, I am not sure how to do a good job of it?

FYI - maybe 30-40mls of a dark vanilla 65PG/35VG juice brought it to this point.

I am wondering about the new Sabot-DDD? Will we be able to clean the interior well?

Vaping some of my limited GVC tastes very sweet at this point, possibly better than with head #3 (now on head #4). Just really surprised that a hot water rinse does not do a decent job of cleaning the interior of the billet bridge - so now what?

30-40ml of juice is a LOT of juice. Any atty will get very very gunked up and dirty after that much juice. I'd say most would be severely impaired at that point. After maybe half that in one of my Spheroids, i can barely taste the flavor and get far less vapor. I need to rewick, dry burn and swab with a bit of alcohol to get the taste back - and clean out the fluff as well.

Consider what a carto would look like after around 6-8 BB tanks of juice.
 

Peter_C

Who?
ECF Veteran
Verified Member
Nov 7, 2013
1,856
5,126
63
Akron, Ohio
www.facebook.com
30-40ml of juice is a LOT of juice. Any atty will get very very gunked up and dirty after that much juice. I'd say most would be severely impaired at that point. After maybe half that in one of my Spheroids, i can barely taste the flavor and get far less vapor. I need to rewick, dry burn and swab with a bit of alcohol to get the taste back - and clean out the fluff as well.

Consider what a carto would look like after around 6-8 BB tanks of juice.

You are missing the point? The heads were being changed, and the billet bridge itself was being rinsed, etc - my point being that how would one clean the *inside* openings of the billet bridge other than with flowing water?
 

StrikeIII

Ultra Member
ECF Veteran
Verified Member
Dec 10, 2013
2,063
6,900
Chicago
You are missing the point? The heads were being changed, and the billet bridge itself was being rinsed, etc - my point being that how would one clean the *inside* openings of the billet bridge other than with flowing water?

For tight spots like that I use those thin pipe cleaners. You knew those wire rods with bristles on them. Those do a good job. I used the ones I had left over that I used to clean my daughter's sippy cup straws. Just clean them when done and they can be reused for a long time.

Sent from my HTC One_M8 using Tapatalk
 

Scubabatdan

Vaping Master
ECF Veteran
Verified Member
Jul 14, 2009
4,749
6,733
62
Dothan, AL
Am I right in guessing that you matched up the radius of the tip with the corners of the Billet Box? Or was that just happenstance?

(Of course I know what the answer is going to be now...)

LOL very perceptive :D
I'll never tell.

Hey you get your package?
Dan
 

FringeChief68

Kingsguard
ECF Veteran
Verified Member
Oct 10, 2013
14,582
77,416
Pittsburgh, Pa, USA
Learned something interesting to me while cleaning my Billet Box today.

Like usual, I take everything out, wipe any juice out, etc, then using both kleenex and q-tips both with and without alcohol, I wipe everything down, and pay special attention to the tracks - normal stuff. (of course add a bit of olive oil to the tracks when done).

What surprised me was after cleaning the tank, and the billet bridge pieces, I happened to take a q-tip to the large part of the billet bridge, and got some dark gunk out??? Huh? Full rinse with hot water every time I swap heads, so I *assumed* that narrow opening was clean. So I get a q-tip soaked in alcohol, and ran it in both sides as best I could, then poured some alcohol in and let it soak a bit, and poured it out through a kleenex only to find some residue on the kleenex? In other words, it appears the inside of the billet bridge needs regular cleaning, but with how narrow the opening is, I am not sure how to do a good job of it?

FYI - maybe 30-40mls of a dark vanilla 65PG/35VG juice brought it to this point.

I am wondering about the new Sabot-DDD? Will we be able to clean the interior well?

Vaping some of my limited GVC tastes very sweet at this point, possibly better than with head #3 (now on head #4). Just really surprised that a hot water rinse does not do a decent job of cleaning the interior of the billet bridge - so now what?

I use pipe cleaners on my drip tips, maybe they will work.
View attachment 334267
Find them in Arts and Crafts sections of stores. Even the Dollar stores lol.

My BB should be here today, I can't wait :)
 
Last edited:

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,979
182,893
Midworld
Attention shoppers! I know it's not a promise, particularly given the family circumstances DD is dealing with, but he did post that they MIGHT put a batch up on Monday. Since most are conditioned to Saturdays, I thought I'd post the link here, so nobody misses it.

Billet Box Vapor Inc.

And if I did miss an earlier reference anyone made to this, I apologize for the redundancy.
 

Devilution2010

Senior Member
ECF Veteran
Verified Member
Jan 5, 2014
123
479
NY, USA

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,762
Utopia
Last edited:

ThreeDJ16

Vaping Master
ECF Veteran
Mar 19, 2013
3,035
12,291
USA
First +2 on the RTD vapors....very reputable. I had a bad eFest, replaced without a hassle.

Second, on the cleaning, I can't recommend enough a ultrasonic cleaner. Very reasonable from Amazon. I love my new one. And the gunk shall melt away. Hadn't noticed any gunk in the sabot though. Not really a lot of places for it to latch onto. But I do have to change my cotton on every tank if I want that wonderful fresh cotton (neutral) and ejuice flavor to shine through.
 
Status
Not open for further replies.

Users who are viewing this thread