~The Billet BoX~

[SilentEcho13]

Can you roll the ball any with the syringe? May get it to reseat in a different spot and eliminate the bubbles.

Filled some more and poked it around a bit. It seems alright for now, I hope it's not damaged though.

Another note: every damn carto I punch ends up deformed with the Siam punch. Annoying. It takes alot of effort just to get the carto out of the tank. Guess I need a better punch...

 

[Madriz]

Filled some more and poked it around a bit. It seems alright for now, I hope it's not damaged though.

Another note: every damn carto I punch ends up deformed with the Siam punch. Annoying. It takes alot of effort just to get the carto out of the tank. Guess I need a better punch...

Glad to hear your tank is okay. On another note I still punch most of my cartos with a drywall screw and it works very well, when it gets dull I get a new one. It's a little rudimentary but heck it has gotten me out of many a pinch.

Sent from my Galaxy SIII using Tapatalk II

 

[DGR_Spec]

Filled some more and poked it around a bit. It seems alright for now, I hope it's not damaged though.

Another note: every damn carto I punch ends up deformed with the Siam punch. Annoying. It takes alot of effort just to get the carto out of the tank. Guess I need a better punch...

Aakaash, i use the Atmizoo Pecker... pricey for a carto punch but it works well for me.
-Robbie

 

[DGR_Spec]

Glad you all on preorder # 2 don't have to wait as long as some of us did...

 

[Katdarling]

Silent Echo Echo Echo Echo Echo,

I started out with a saddle valve. Yuck and a 1/2. It punched around 3.7 cartos before giving up the ghost.

Then I got one like the Siam punch. It lasted a bit longer, but dented and deformed all the way home.

I bit the proverbial bullet and got the VIP vapors punch ($$$$$) and I do really like it! The tip is made of (something) and doesn't wear down or get dull like the others.

http://www.e-cigarette-forum.com/fo...-forum/357383-billet-box-239.html#post9166635



I'm also using a very inexpensive (so that would be what...-$) punch called the QT3 or something? I posted it awhile back. Will find it and edit this post (if ECF doesn't double down on me first).

Ahh, here tiz: http://www.e-cigarette-forum.com/fo...-forum/357383-billet-box-338.html#post9267267

 

[-RiZ-]

Aakaash, i use the Atmizoo Pecker... pricey for a carto punch but it works well for me.
-Robbie

Actually I was going to suggest checking that one out. Ordered one a few days ago.

Do you find you get minimal deforming with it??

 

[-RiZ-]

Arg, my first double. weeee

 

[LouEyez]

So I just bought some of these batteries but now I'm not sure I bought the right ones anymore
ElectronicStix.Com · AW RCR123A 3.7V 750mAh Li-Ion Battery
they are AW RCR 3.7v
I didnt notice the rcr until now (bb frenzie and all) but what I dont get is that in the faq it says aw ICR123a 3.7v but that RCR 123a are usually 3v...that they will work, but to a limited capacity.
These claim to be 3.7v RCR...
Anyway, can someone please confirm that they will at least fit? I really dont want to end up with the trustfire problems I've run into with other mods.

Thanks,

 

[LouEyez]

seems this double posting (DP for you connoisseurs is BB related...every time there is a sale, or a pre order, ECF slows down...

things that make you go huuummm

 

[Vapian]

So I just bought some of these batteries but now I'm not sure I bought the right ones anymore
ElectronicStix.Com · AW RCR123A 3.7V 750mAh Li-Ion Battery
they are AW RCR 3.7v
I didnt notice the rcr until now (bb frenzie and all) but what I dont get is that in the faq it says aw ICR123a 3.7v but that RCR 123a are usually 3v...that they will work, but to a limited capacity.
These claim to be 3.7v RCR...
Anyway, can someone please confirm that they will at least fit?

Can't say for sure until you get your items, but the image displayed is of an AW ICR 123.
If that's the case you'll be fine - proper size and voltage.

 

[lhavelund]

Grats to everyone who got theirs on pre-order round 2! Looks like you'll be getting yours around the same time as I'll get mine!

 

[LouEyez]

Can't say for sure until you get your items, but the image displayed is of an AW ICR 123.
If that's the case you'll be fine - proper size and voltage.

Thanks for the reply Vapian...
L

 

[Bestillsoicanshootyou]

I keep trying to take a picture of the dent but nothing seems to show up in the picture...tomorrow in natural light maybe.

might try one of those rubber jar opener assist rubber flap pad thingies- wont fix the problem but may give you enough grip to get er open. I'm guessin the channel is deformed I'd try the aforementioned freze+a drip o wd 40 at the seam then give it a go wit da gripper...

 

[sgenn99]

Not a weapon but I'm more a toy guy.

love the drip tip-where'd you get it?
also, nice tonka!

 

[ohman]

For what I its worth it I just hacked a slice in a 2 hole boge carto right at 1 of the holes. I enlargement it by about 4mm. Then sanded the tube smooth with 400grit. Seems to have a tad more flavor. 2 days in so far still good.

Not the best picture..

Sent from my SPH-L710 using Tapatalk 2

 

[Absintheur]

good Billet Box morning all...

 

[rcoute]

I take two set of AW ICR 123. recommend batterie for one tank of juice
carto 3ohm volt 4,5
about you guy's

 

[mwmccormick]

Anyone thought about or tried one of those Phoenix Raven carto's in a BB? I know they have a flange but I saw that they are coming out with flangeless versions very soon. Since I have a few weeks to wait for mine, I have time to think.
I bought a Raven a short while back and it was a pretty good vape. A bit too airy for me, but it would likely perform differently in the BB. A guy at work needed something in an emergency so I sold it to him. Never bought another, but now I'm thinking......
It seems that the Raven carto's are the same size as a regular carto, and if they are too tall they could be easily reduced.

ANyway, I was just pondering......

 

[SilentEcho13]

Aakaash, i use the Atmizoo Pecker... pricey for a carto punch but it works well for me.
-Robbie

Looks pretty cool, any issues with deforming and all?

Silent Echo Echo Echo Echo Echo,

I started out with a saddle valve. Yuck and a 1/2. It punched around 3.7 cartos before giving up the ghost.

Then I got one like the Siam punch. It lasted a bit longer, but dented and deformed all the way home.

I bit the proverbial bullet and got the VIP vapors punch ($$$$$) and I do really like it! The tip is made of (something) and doesn't wear down or get dull like the others.

http://www.e-cigarette-forum.com/fo...-forum/357383-billet-box-239.html#post9166635



I'm also using a very inexpensive (so that would be what...-$) punch called the QT3 or something? I posted it awhile back. Will find it and edit this post (if ECF doesn't double down on me first).

Ahh, here tiz: http://www.e-cigarette-forum.com/fo...-forum/357383-billet-box-338.html#post9267267

Nice introduction lol.

The VIP punch is out of stock, even at COV :/. It is a little pricey though. How's the QT3 treating you so far?

 

[Tito1982]

There's also the tiny mite which is similar to the vip punch, only difference is it's tube shaped.

ElectronicStix.Com · Tiny Mite Carto Punch