Im using 4/5 32g. On P+ , right after posting i decided to bore one hole to 1/16 and that seemed to make it a lot better for me
The bliSS rebuildable atomizer now in stock!
- Thread starter jayson
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo lavatube provari revolution
- Status
So, based on the pic above, I'm guessing the bliss can be used without the tank shield if preferred?
yeah it can be used w/o it but as you can see in the above pic the tank isn't streamlined with the body/top cap so personally I think it looks goofy but to each its own.
Got my bliSS in today, will have to make a coil for it Friday and give it a try.
Love Todd's reviews. He compares it to a hellfire and I read someone called it a HF killer. I would have to agree. Better made and much easier to get, it's all good for us.
Finally got to try a hellfire. It performs better than my ZEN (ZAP) if you are looking for an insane vape... but I much prefer my bliss. The vapor and flavor is much better on the Bliss IMHO.
I know we are all chomping at the bit for the TI versions ,any new info on this? I know TI is a VERY difficult to machine metal (high temps, deformation, deflection etc) so I understand if its taking a while.. Will these be serial numbered? <- cause that would be cool
I snagged a Bliss RA off the ECF classies last week and got it yesterday. Also got my order of 500 ss mesh. Both are TOTALLY rockin my vaping boat!
The Bliss RA is designed for dual coils. A bit more work in doing dual wick/coils, but the way the top plate is designed it makes doing dual coils easy. Plus once you vape with the dual coils on this Bliss it's like omg that's a great vape!
The negative and positive screws are perfectly positioned next to the wick so the coil comes right off the wick and to the screw with no space.
AND it comes with 1/32" dual air holes located on opposite sides of the vapor cap that line up with each wick/coil. I was extremely happy to see the smaller air holes as that's a perfect draw for me.
I did a dual mini chimi wick where I used XS-116 (1/16") silica sleeve and a 1" tightly rolled 500 ss mesh slipped into the sleeve. The 500 ss mesh is super fine and can be rolled really tight so was able to easily fit a 1" rolled piece into the sleeve. With the 400 ss mesh, I was able to get only about 1/2" of a tightly rolled piece into the XS-116 silica sleeve.
The wick holes in the Bliss are 3/32". The mini chimi fit but needed a bit of breathing room so I enlarged the wick holes to 7/64". I used 34ga Kanthal A1 with 7 wraps and each coil came out to 3.4 ohms. When I checked the dual coils came in at 1.7 ohms. I wanted to use 32ga Kanthal but was too many loops to get to 3 ohms. The dual mini chimis are wicking great and I don't have to do the geni tilt at all.
The Bliss has a 2ml clear tank with a threaded stainless cover. It's cool in that the cover can be unscrewed and removed and the tank can be slid off without disturbing the wick/coils for cleaning and dry burning.
I do believe my search for the perfect quality and designed RA has come to an end! I love the vapor, hit, draw, flavor I'm getting with it! Absolutely no hesitation at all about recommending the Bliss. Gad... I'm excited!! From the very first draw I fell in love with it. Absolutely awesomesauce in the vapegasm dept.
I like it so well, I went to the site and ordered another Bliss - last one cuz now out of stock.
Total win-win for DocDave and Elite!
The Bliss RA is designed for dual coils. A bit more work in doing dual wick/coils, but the way the top plate is designed it makes doing dual coils easy. Plus once you vape with the dual coils on this Bliss it's like omg that's a great vape!
The negative and positive screws are perfectly positioned next to the wick so the coil comes right off the wick and to the screw with no space.
AND it comes with 1/32" dual air holes located on opposite sides of the vapor cap that line up with each wick/coil. I was extremely happy to see the smaller air holes as that's a perfect draw for me.
I did a dual mini chimi wick where I used XS-116 (1/16") silica sleeve and a 1" tightly rolled 500 ss mesh slipped into the sleeve. The 500 ss mesh is super fine and can be rolled really tight so was able to easily fit a 1" rolled piece into the sleeve. With the 400 ss mesh, I was able to get only about 1/2" of a tightly rolled piece into the XS-116 silica sleeve.
The wick holes in the Bliss are 3/32". The mini chimi fit but needed a bit of breathing room so I enlarged the wick holes to 7/64". I used 34ga Kanthal A1 with 7 wraps and each coil came out to 3.4 ohms. When I checked the dual coils came in at 1.7 ohms. I wanted to use 32ga Kanthal but was too many loops to get to 3 ohms. The dual mini chimis are wicking great and I don't have to do the geni tilt at all.
The Bliss has a 2ml clear tank with a threaded stainless cover. It's cool in that the cover can be unscrewed and removed and the tank can be slid off without disturbing the wick/coils for cleaning and dry burning.
I do believe my search for the perfect quality and designed RA has come to an end! I love the vapor, hit, draw, flavor I'm getting with it! Absolutely no hesitation at all about recommending the Bliss. Gad... I'm excited!! From the very first draw I fell in love with it. Absolutely awesomesauce in the vapegasm dept.
I like it so well, I went to the site and ordered another Bliss - last one cuz now out of stock.
Total win-win for DocDave and Elite!
Awesome review, thanks! Now I know why they were out of stock last night when I went to order Sounds like it is worth waiting for.
Sounds like it is worth waiting for.
Any word on the TI release time frame? Not trying to bug (though I am).. but just trying to see if I need to save my vape budget for the TI, or If I have some time till its here. I dont want to spend the $200 and have it come out the day after.. hahaha
Ive noticed that most people I talk to say there air holes line up with the wick holes, it seem that my top cap spins about 1/4-3/8" past the wick holes throwing the allignment off, so it seems there is a defect somewhere just wondering if this can be corrected for me.
I will check with Dave. Is your tank shield on all the way? So you are saying that if you loosen the cap a bit they line up? Just trying to see which direction they are off in.
- Status
Similar threads
- Locked
