The Bubble Pumper

[Snipper]

Hey guys

I want to introduce you to my mod the 'Bubble Pumper' inspired by many devices I have researched, but custom made for my own requirements.

It's a hardcore tradesman special or as I use it 'a sit at home vaping workhorse that I can drag around the house with me and dont have to think about refilling or recharging for a couple of days.

Main Features:

Aluminium body
510 Threaded
Battery Vent at the bottom
Fits a 18650 2400Mah Battery
Fed by a precise 10 Ml pump fed liquid drip system

You can use other combinations of batteries for high end use
eg: 2 x RCR123A for 6v system

I am attaching a few photos, and not even sure if they will show as I have never posted a photo before, but hey here goes and be easy on me as I am a newbie and have only just started putting together some devices and this is one of them I wanted to share.

It works awesome in a 18650/510 LR atty combo.

Please feel free to leave any comment or suggestions so I can improve it further.

Snipper

 

[Youthful313]

Nice, it looks like what a robot would use to vape. lol

 

[ipushbuttons]

I have been working on a 3ml recessed atty jb type unit with a three or four battery box, not exactly sure what im gonna use for the juice injection system yet. I like the ease of using the simple 3ml bottle squeeze style but it just doesn't look sharp enough for me. I really like you're alternative injection method. Would that happen to be a primer from an engine if you wouldn't mind me asking?

 

[Connman]

Does the weed whacker or mower need parts now?

Looks really good and love the box. If I recall correctly there was talk on using this type setup. Around the same time the Carlos Juice box came along I believe.
Nice Mod

 

[Snipper]

Nope lol I went to the mower shop and got one
I was unsure if it would even work before I got one and tried it, but it actually works perfectly, I wanted to recess it inside by using a couple of washers, but even with this box its a bit cramped.

Does the weed whacker or mower need parts now?

Looks really good and love the box. If I recall correctly there was talk on using this type setup. Around the same time the Carlos Juice box came along I believe.
Nice Mod

 

[Snipper]

Connman got it right, its a primer bulb from a whipper snipper, had this idea in my head for ages to use one, not sure if anyone else has but it works a treat.
Snipper

I have been working on a 3ml recessed atty jb type unit with a three or four battery box, not exactly sure what im gonna use for the juice injection system yet. I like the ease of using the simple 3ml bottle squeeze style but it just doesn't look sharp enough for me. I really like you're alternative injection method. Would that happen to be a primer from an engine if you wouldn't mind me asking?

 

[Snipper]

Yep lol
I was sick of dragging around my Silver Bullet and Saber Touch and forever worried about dropping them while I was working in the shed, so I figured I will build something rock solid.
But then again it's a great TV watching mod..lol

Nice, it looks like what a robot would use to vape. lol

 

[Youthful313]

I like it Snipper let me know if you ever start making them for others I'd love to try it out.

 

[Shortstuff116]

Actually it's a pretty neat idea to find and use something small that's going to give you a somewhat metered amount of e-juice with a simple push.

Nice job!

 

[scinsc]

Snipper,
Great idea. Keep up the good work.

 

[roadrash]

Snipper,
Great idea. Keep up the good work.

+1, love the pump, so much better than squeeze.

 

[5cardstud]

Great mod, where is that box from?

 

[Snipper]

Great mod, where is that box from?

www.Jaycar.com.au, they are an electronics place in oz where I get all my switches, boxes etc:
I have a feeling they are worldwide as well. I will see if I can find the page link and post.

 

[yoyoma_mda]

i love it! it looks like a pleasure to use the primer squeeze button instead of squeezing an actual bottle. Keep me posted if you decide to sellem!

 

[Snipper]

www.Jaycar.com.au, they are an electronics place in oz where I get all my switches, boxes etc:
I have a feeling they are worldwide as well (not sure).
I will see if I can find the page link and post.

Just go to www.jaycar.com.au and search 'aluminum box' and you will see they have a few different kinds.
Also check out the switches as I remember in another post i read somewhere that someone was looking for a switch similar to the Silver Bullet has and they have them here (almost identical)
(SB type switch will be installed in the next bubble pumper (when I can figure out how to cram it in .

 

[Snipper]

i love it! it looks like a pleasure to use the primer squeeze button instead of squeezing an actual bottle. Keep me posted if you decide to sellem!

Yea it works a treat, one small press (only a quarter press of the bubble) and you see a whiff of smoke out of the chimney when squirting into a warm atty and your ready to rock on some more)
Best thing is when you have it properly sealed & pull off the drip tip to change atty the liquid stays in the feed tube and won't run back or even leak out.

Bottom fed system, Silver Bullet type switch & retractable atty that will lock in for use when extended & drop down into the case and disconnect from circuit for when your travelling with the bubble pumper in your pocket, there will be a few more surprises coming in next build

Snipper