The copper mod>

[vaporich]

I just got myself a 6 volt copper.
Man, does it provide a great hit.
I am really impressed.
I have some questions though.
Has anyone used the 901 with it?
How have your atomizers held up?
Any tricks or tips?

Also, I need a modification for the 801 cartridge. IT sucks, outright.
I just got a passthrough for it, and was looking foward to great vaping, but the damn cartridge on the 801 is horrible. It always leaks.
And, it seems to not vaporize the juice inside, like the smaller, shorter cartridges do.
What can I do, I like the bigger atomizer in the 801, but I need to use it.
Vaporich

 

[vaporich]

Does anyone out there have any ideas on how to make the 801 cartridge work well!!!
IT constantly leaks juice, and doesnt get a full vape like the other cartridges.
If I could just have a great cartridge for it, the 801 would kick some serious .....

 

[Burnie]

Sorry, don't like the 801 myself, drank too much juice, and not enough vapor.

Burnie

 

[warp1900]

This is one of the best mods for cartridges including the 801, works great.

http://www.e-cigarette-forum.com/forum/tips-tricks/11421-cart-mod-better-refilling.html#post176708

 

[chicken]

Does anyone out there have any ideas on how to make the 801 cartridge work well!!!
IT constantly leaks juice, and doesnt get a full vape like the other cartridges.
If I could just have a great cartridge for it, the 801 would kick some serious .....

You need a syringe with an 18 gauge needle. Fill the syringe to ~.5 mL with juice. Then insert the needle to the base of the cart, and slowly depress the plunger as you withdraw the needle. You may have to add a drop to the top of the cart too. This is a fast and easy way to fill your 801 cart, eliminating virtually all the air. The difference is remarkable. I discovered this when my got my SD. It eliminated the nuisance of constantly having to "top off."

 

[warp1900]

You need a syringe with an 18 gauge needle. Fill the syringe to ~.5 mL with juice. Then insert the needle to the base of the cart, and slowly depress the plunger as you withdraw the needle. You may have to add a drop to the top of the cart too. This is a fast and easy way to fill your 801 cart, eliminating virtually all the air. The difference is remarkable. I discovered this when my got my SD. It eliminated the nuisance of constantly having to "top off."

I don't think that is either very portable or functional and there is a reason why most people have stopped using syringes to fill cartridges.
Anyway the question posted is about how to make the cartridge use more of the juice in it, not how to fill it up.

The straw mod i posted a link to is so far as backed by most the forum users, the best way to make a cartridge both fill up and use all the juice in it once filled. Less leaking and better wicking.

A very simple mod and very effective, no real way to explain it with words, best is to try it out.

 

[framitz]

I don't think that is either very portable or functional and there is a reason why most people have stopped using syringes to fill cartridges.
Anyway the question posted is about how to make the cartridge use more of the juice in it, not how to fill it up.

The straw mod i posted a link to is so far as backed by most the forum users, the best way to make a cartridge both fill up and use all the juice in it once filled. Less leaking and better wicking.

A very simple mod and very effective, no real way to explain it with words, best is to try it out.

I've found that using the straw mod and filling with a syringe (at least with my BE112) can have some unpleasant surprises... like juice squirting out of the straw when you inject into the bottom of the cart... So I still use the straw mod, but seldom fill with the syringe any more. With the straw in place the drops go in very quickly anyway.

 

[nubee]

I just started using the hybrid mod (polly fill with tea bag topper - no straw) and I'm sold.

Has the ease and amount of fill you want with the 801 without the juice jam the polly fill can give you.

 

[chicken]

Thanks for your curt response. I cut an 18 gauge needle to length to create a shrink tube. My idea + your idea = perfection. See- two ideas are better than one, even if one is rude!

 

[jeffakamax]

Re: 801 carts leaking. This has probably been covered a million times but make sure you have the air channels aligned correctly. If they get rotated to top/bottom the bottom one will gather liquid and you will have a mouthful in no time.