the eraser V3
- Thread starter jhonutz
- Start date
- th_trl_thread_readers 0
- Status
150$ V4, New look, 510 connector, under-voltage lockout at 6V, works with 2x 18350 IMR. Same size 120mm long, 25mm diameter
yep I don`t like because it`s no so good, too much losing power. Anyway will see..maybe I will make one in a future.
3.5Amps.But I don`t think you will vappe so hard 
You are thinking, I sell this, on other forums I have awaiting list.
Here people or don`t want, or prefer only SS, seems to be a death end for me here
You are thinking, I sell this
, on other forums I have awaiting list.Here people or don`t want, or prefer only SS, seems to be a death end for me here
Last edited:
I dunno, the provari and darwin seem to do pretty well, also the kick is a booster and lots of people like that, Lavatube is pretty popular as well.
You are right though most people around here prefer SS, another reason for apprehension might be stacked batteries, I dont have an issue with it other than the size but a lot of people do. Just a guess. I would be willing to bet if it was smaller you would sell a lot more, I am glad you are doing well on the other forum at least. I also think if you made a single 18350 3.7v device with touch switch and make it as small as possible for under a hundred bucks shipped I think you would sell a lot of them, make it stainless and you would sell even more. Also some up close detailed pics might help as well, your pics are not bad but some macro shots would be nice. Obviously, this is all my own opinion and I could be wrong. If you make a small 18350 mod, I will be in for sure.
The fear for stacked batts, I know..but it`s for nothing. I use stacked batts from almost 1 year, no problem.Anyway my mod it`s protected. I have a word " Who want to buy mod to put in a window, can buy SS, who want to have a very good VV for decent vapping can buy my Eraser" .
Anyway SS it`s very hard to working on him, specialy that window for voltmeter+ much heavy. In time possible to make even boosters or SS. For the moment I sell a very good step down VV mod
PS: For under 100$ go buy a crap Lavatube or a mod box. I`am not in China, components cost me, also big work to make this. An SS blind without VV it`s sale with 120 Euro, and you want my Eraser with a few bucks?!!
But like I said here it`s a dead end, ECF was drowned in safety policy, restriction.., put unfounded fear on people about tubes mod. No word about China EGO who exploded in US 3 months ago
. Even in case of short circuit, a 4 mm wall don`t explode, beside my tube have vetiled hole, pressure it`s realease.Combined with a little carre of you to use only pair recharged batts 100% safety
I don`t want to make mass production, easy and good it`s ok.
.Anyway SS it`s very hard to working on him, specialy that window for voltmeter+ much heavy. In time possible to make even boosters or SS. For the moment I sell a very good step down VV mod
PS: For under 100$ go buy a crap Lavatube or a mod box. I`am not in China, components cost me, also big work to make this. An SS blind without VV it`s sale with 120 Euro, and you want my Eraser with a few bucks?!!
But like I said here it`s a dead end, ECF was drowned in safety policy, restriction.., put unfounded fear on people about tubes mod. No word about China EGO who exploded in US 3 months ago
. Even in case of short circuit, a 4 mm wall don`t explode, beside my tube have vetiled hole, pressure it`s realease.Combined with a little carre of you to use only pair recharged batts 100% safetyI don`t want to make mass production, easy and good it`s ok.
Last edited:
I will get on one of your waiting lists when I have the money saved up. I have likes your mods since you started posting but was hesitant on stacked batteries because I don't have any smaller batteries. I've been looking at your thread on the other forum and you have great feedback, you are great at what you do. I can't afford it now but maybe when I have money you will still be able to sell me something
Keep up the great work buddy!
Keep up the great work buddy!
Thank`s
You don`t worry about stacked. Charging in pairs 2 by 2 and combined whit my electronics protection this mod it`s very safe. Anyway it`s hard to damage 18350 IMR. This batts last me one fully day.
You don`t worry about stacked. Charging in pairs 2 by 2 and combined whit my electronics protection this mod it`s very safe. Anyway it`s hard to damage 18350 IMR. This batts last me one fully day.
.After a long "hot" discussion with some guys from my country forum, I decide to drill 4 holes in the top side of the tube for an extra extra protection. My opinion, about what I writen before, remains..Anyway maybe that holes will be a new fresh look
It`s true problem may appears if you don`t use 2 by 2 charged batts.In case of 2 batts one at 4.2V and one at 3V may be a problem. Actualy tube have ventilated holes in bottom and tube it`s pretty safe, but client decide after all.
It`s true problem may appears if you don`t use 2 by 2 charged batts.In case of 2 batts one at 4.2V and one at 3V may be a problem. Actualy tube have ventilated holes in bottom and tube it`s pretty safe, but client decide after all.
Last edited:
Maybe you did not read my post thoroughly, the only thing I was talking about for under 100 bucks was a non vv 3.7v device with a touch switch. Like I said before, I have no problem stacking batts, I did it for a long time, I just dont really need to anymore because I am usually satisfied with 3.7 or 4.2. I apologize if I made you mad, as that was not my intention, I was honestly trying to give my opinion on why you have not had much luck here on ecf, in other words I was just trying to help. Good luck.The fear for stacked batts, I know..but it`s for nothing. I use stacked batts from almost 1 year, no problem.Anyway my mod it`s protected. I have a word " Who want to buy mod to put in a window, can buy SS, who want to have a very good VV for decent vapping can buy my Eraser"
Anyway SS it`s very hard to working on him, specialy that window for voltmeter+ much heavy. In time possible to make even boosters or SS. For the moment I sell a very good step down VV mod
PS: For under 100$ go buy a crap Lavatube or a mod box. I`am not in China, components cost me, also big work to make this. An SS blind without VV it`s sale with 120 Euro, and you want my Eraser with a few bucks?!!
But like I said here it`s a dead end, ECF was drowned in safety policy, restriction.., put unfounded fear on people about tubes mod. No word about China EGO who exploded in US 3 months ago
I don`t want to make mass production, easy and good it`s ok.
I`am sorry for what I write, even I don`t remeber and for sure I wasn`t mad . yep I can make one 3.7V with touch switch but not right now, I have to make some VV first. Anyway if you realy want, contact me and I will make one for 80$ not for 100$ .
Untill that, I will let you to see a 3.7 mod with touchswitch(sensor),60mm long, 1x18350.
and for sure I wasn`t mad . yep I can make one 3.7V with touch switch but not right now, I have to make some VV first. Anyway if you realy want, contact me and I will make one for 80$ not for 100$ .Untill that, I will let you to see a 3.7 mod with touchswitch(sensor),60mm long, 1x18350.
Last edited:
I don`t know. With 10440 vape how long? 1-2 hours ?Worth to make a mod for 1 hour of vape?
10440 works really well for me during work - don't get much time to vape, only during breaks. If I take 1 extra battery I can usually make it last a whole work day. I think a small, light 10440 with a touch sensor would be great
- Status
Similar threads
