The iHybrid APV - A fully Customizable Genesis

[jcarabelos]

jcarabelos...we need to meet up for a beverage when our Hellraisers get here. Longmont? Broomfield? Need to get the CO vape meets going again too, they were a lot of fun while they were going.

Sup Faceless, you're up late.

Could not agree more! I'm in Thornton but I have no qualms with traveling a bit, especially to meet a fellow hybreed

EDIT: And maybe we should just get those vapemeets going again? I'm down to help in any way if you're interested. Never been to one and I think it would be a great time

 

[Bamrz]

Not a gun nut, but there is a SK in the garage, 357 in the closet and 12 gauge under the bed. All loaded with trigger locks, you just never know...

Zombies.

 

[jcarabelos]

Zombies.

Oh don't get me started

 

[debook]

not to sound like a jerk or come off wrong but if someone is coming at you in your room and you drop to the floor and reach under your bed for your 12 gauge how are you going to get the lock off in time to use it other than a club???

I keep a loaded handgun within arms reach of me when in bed.....
its also a good idea to practice jumping up and accessing it with aiming and everything even dry fire to make sure you can defend yourself in a dynamic threat situation

obviously if you have children in the house you need to take different precautions.
I have small ones and mine goes in the safe or higher than arms reach during the day.

Not a jerk at all and something that I think about often. Fortunately we have a 125lb Akita who will give me plenty of warning so I can get the lock off. We do have our kid and my nieces around a lot so the locks are a necessity, we live in a decent area with low occurrence of breakins but they do happen so best to be prepared.

 

[jcarabelos]

Yeah I think that Akita will do the trick.

 

[Faceless]

Face I think this is the first time I'm on the thread and you're actually on too, rather than me just missing your random stop-ins and reading them when I catch up. How are the HR's coming??? I'm sure they're going to be epic, and I CANNOT WAIT TO GET MINE. What's really funny is how much of an enthusiast I have become of your products and I've never even seen one in person!!!!

Hell raisers are doing good I cut all the sleeve designs out today, they go to anodizing monday or tuesday, should have them back by thursday, will engrave tubes friday, assemble sat and sunday and ship monday

Also some of the illuminati tubes has very small scratches on tubes. I found the culprit. So here goes how these things are made to explain how they got by me.

First I make all the parts and then examine them to make sure they dont have dings and such. I then took them to anodizing, I get them back and just check that the color came out good by grabbing a few sample parts, then I engrave them with special handling care and roll them up in paper after done, I then bring them home and assemble them and pack them at the same time, then I print shipping labels and slap them on the boxes and go to PO.

The scratches on some of the tubes werent from me, they wouldnt have got past me, I look at everyone of them after machined. The anodizer hooks something up to them to do their process and put plugs in the threaded area. The metal they place them on and the way they are handled at anodizing was the reason for the small scratch on some of them. Took me a minute to figure it out, but I inspected the clear anodized standards and saw the same thing. Had a discussion with my anodizer about it. It has been handled. Sorry, I didnt even inspect the tubes after anodizing, I didnt think they would be rough with my tubes, I handled it though

So...... Hell Raisers are coming along on schedule, if anything knocks it off schedule I will keep yall updated. I wont miss a projected release date by much if I ever do, on that note flower LE's should be in peoples hands before christmas

 

[crashtest22]

Not a jerk at all and something that I think about often. Fortunately we have a 125lb Akita who will give me plenty of warning so I can get the lock off. We do have our kid and my nieces around a lot so the locks are a necessity, we live in a decent area with low occurrence of breakins but they do happen so best to be prepared.
View attachment 158513

well played sir...well played...
that will help for sure.
or keep them from breaking in in the first place....

 

[therealcmac]

So we will have them around the same time, we are the lucky ones of being on the unfortunate end of shipping times.

Will you do a review then?

I don't know man, hardware reviews are a lot of work haha, and I don't want to get shredded by the hybreeds It would have to be prefaced "this is my first hybrid!" lol. Once i get through the landslide of juice I have to do, and get the eVic out of the way I might take a crack at it... I really cannot get over how beautiful the Blue Dragon is...I just look at it and cannot believe I own it...not sucking up either, it is just a SEXY unit.

 

[debook]

EvilErnie from Obsidian Vapors used to coordinate them but he got banned from ECF and stopped putting the meets together. They were a really good time, usually down in Castle Rock. We talked about having one at one of the Casino's, never came to be. Would love to get that going again.

 

[crashtest22]

ok off to bed for me.
nighty night hybreeds

 

[emonty]

I postpone x-mas if the HR is delivered a little later!

 

[kiska]

Evening fellow Hybreeds. Tonight the family and I went to Riverside, CA to checkout the holiday lights at a place called the mission inn. Crowds of people all over the place and with all the Xmas lights it reminded me of Disneyland. I had my standard with me and vaped all night attracting lots of attention from many people. I swear I must of spent half my time there doing demos and answering questions concerning the iHybrid and giving out the web site address. I hope faceless gets a few hits from all the advertising tonight.

 

[jcarabelos]

Hell raisers are doing good I cut all the sleeve designs out today, they go to anodizing monday or tuesday, should have them back by thursday, will engrave tubes friday, assemble sat and sunday and ship monday

Also some of the illuminati tubes has very small scratches on tubes. I found the culprit. So here goes how these things are made to explain how they got by me.

First I make all the parts and then examine them to make sure they dont have dings and such. I then took them to anodizing, I get them back and just check that the color came out good by grabbing a few sample parts, then I engrave them with special handling care and roll them up in paper after done, I then bring them home and assemble them and pack them at the same time, then I print shipping labels and slap them on the boxes and go to PO.

The scratches on some of the tubes werent from me, they wouldnt have got past me, I look at everyone of them after machined. The anodizer hooks something up to them to do their process and put plugs in the threaded area. The metal they place them on and the way they are handled at anodizing was the reason for the small scratch on some of them. Took me a minute to figure it out, but I inspected the clear anodized standards and saw the same thing. Had a discussion with my anodizer about it. It has been handled. Sorry, I didnt even inspect the tubes after anodizing, I didnt think they would be rough with my tubes, I handled it though

So...... Hell Raisers are coming along on schedule, if anything knocks it off schedule I will keep yall updated. I wont miss a projected release date by much if I ever do, on that note flower LE's should be in peoples hands before christmas

You're one helluva guy. Thanks for the update! How do I link my bank account to yours so you can just take my money and send me your products?

 

[jcarabelos]

EvilErnie from Obsidian Vapors used to coordinate them but he got banned from ECF and stopped putting the meets together. They were a really good time, usually down in Castle Rock. We talked about having one at one of the Casino's, never came to be. Would love to get that going again.

Well let's do it!

 

[Nurzrachit]

Hell raisers are doing good I cut all the sleeve designs out today, they go to anodizing monday or tuesday, should have them back by thursday, will engrave tubes friday, assemble sat and sunday and ship monday

Also some of the illuminati tubes has very small scratches on tubes. I found the culprit. So here goes how these things are made to explain how they got by me.

First I make all the parts and then examine them to make sure they dont have dings and such. I then took them to anodizing, I get them back and just check that the color came out good by grabbing a few sample parts, then I engrave them with special handling care and roll them up in paper after done, I then bring them home and assemble them and pack them at the same time, then I print shipping labels and slap them on the boxes and go to PO.

The scratches on some of the tubes werent from me, they wouldnt have got past me, I look at everyone of them after machined. The anodizer hooks something up to them to do their process and put plugs in the threaded area. The metal they place them on and the way they are handled at anodizing was the reason for the undersmall scratch on some of them. Took me a minute to figure it out, but I inspected the clear anodized standards and saw the same thing. Had a discussion with my anodizer about it. It has been handled. Sorry, I didnt even inspect the tubes after anodizing, I didnt think they would be rough with my tubes, I handled it though

So...... Hell Raisers are coming along on schedule, if anything knocks it off schedule I will keep yall updated. I wont miss a projected release date by much if I ever do, on that note flower LE's should be in peoples hands before christmas

Glad you cleared that up. For a minute there I thought you were using them for rollers under your car like fred flintstone.

 

[*ASH*]

Good Morning every one .

 

[cornolio]

Oh crap.so it's my bad genny day.



First had wicking issues. Couldn't figure it out after much fiddling.decided to clean everything and roll new wick.then pic explains it all.

Received bliss today,been fiddling with it all day too,no success.good thing I have an HR coming.

 

[jcarabelos]

Oh crap.so it's my bad genny day.

View attachment 158514

First had wicking issues. Couldn't figure it out after much fiddling.decided to clean everything and roll new wick.then pic explains it all.

Received bliss today,been fiddling with it all day too,no success.good thing I have an HR coming.

Sorry to hear that, man. Sad day indeed.

 

[Nurzrachit]

I postpone x-mas if the HR is delivered a little later!

How satanic of you.

 

[Thorbear]

I don't know man, hardware reviews are a lot of work haha, and I don't want to get shredded by the hybreeds It would have to be prefaced "this is my first hybrid!" lol. Once i get through the landslide of juice I have to do, and get the eVic out of the way I might take a crack at it... I really cannot get over how beautiful the Blue Dragon is...I just look at it and cannot believe I own it...not sucking up either, it is just a SEXY unit.

Don't think you need to worry about being shredded, the hybreeds are a nice bunch - and if they misbehave they have to answer to Fisty