The iHybrid APV - A fully Customizable Genesis

[izdalion]

No offense to the ladies here, but that one is what we call a "4 bagger". One for her, one for you in case hers breaks, one for the dog, and one at the door in case someone walks in

LOL More like a plastic Bagger hahahaha

 

[BoyNamedStacy]

Thanks for the ody help guys. I was just curious what wire to get. I went with silver NR and added 34 and 36 to my collection. I hope that should do the trick

 

[LongHaul]

Depends on what you want your final mix to be. Obviously, if you want 100% VG juice, you need 100% VG nic. I find PG/VG easier to work with. VG is thick!

A few drops of water will fix this.....

 

[jeffy8605]

Thanks for the info guys. I want some where around 50 /50 to 30/70 pg/VG. I think I'm going to order 100mg of pg . Then subtract the amount from the pg I add. Then do the rest with flavoring and VG . Still learning and reading so I know what I just said isn't exactly correct but is somewhat of a start . Thanks again for the help. You guys rock !

Sent from my Galaxy Nexus using Tapatalk 2

 

[Nurzrachit]

It's just football.
I'd prefer a degree from The University of Notre Dame than one from just about anywhere. It's one of the most powerful name brand degrees in the world.

Probably not as overrated as their football program.
Not doggin ND academically. Obviously a great school. Just tired of lame championship matchups.Yea it is just football. Very important shiit!!!!!
Go Dirtybirds!!!

 

[DarklyNoon]

I just put up a WTB ad for a Chi You SS if someone here has one too many.

There was one over at corevape. Pretty expensive tho, $280 iirc. Nor sure if it's still up.

 

[Sgresham]

Hi guys slept for a while, ate a sub and feeling a little bit better. Love the Jack Ihybrid!!

Glad you are feeling better!

Well this isn't puppy pic, but my grand baby's picture
View attachment 167116

Cute little girl!

One of 5 boxes I've been working on today..

And the cut-out design from Nancy cleaned up and made into a vector...

Now Timmy calls.

That is gonna be sick. I'm gonna have to get this one. My wife had a grandma that died of breast cancer a while ago.

Thanks for the info guys. I want some where around 50 /50 to 30/70 pg/VG. I think I'm going to order 100mg of pg . Then subtract the amount from the pg I add. Then do the rest with flavoring and VG . Still learning and reading so I know what I just said isn't exactly correct but is somewhat of a start . Thanks again for the help. You guys rock !

Sent from my Galaxy Nexus using Tapatalk 2

I just bought some 100mg 50/50. You could do pretty much anything you wanted with that, except really high vg juices of course.

 

[NancyR]

And the cut-out design from Nancy cleaned up and made into a vector...

Now Timmy calls.

Thanks Fisty, I can't get one when they are made, but anything that has to do with breast cancer is important to me, my grandmother was a 10 year survivor

 

[ingline]

ok good night all hope everyone has a great night...

 

[Omni3vil]

One of 5 boxes I've been working on today..

And the cut-out design from Nancy cleaned up and made into a vector...

Now Timmy calls.

That's bad .... Can I preorder?

 

[Nurzrachit]

Is there gonna be a breast on an Ihy? Glad it's not in support of testicular cancer.

 

[Murdock Ruml]

One of 5 boxes I've been working on today..

And the cut-out design from Nancy cleaned up and made into a vector...

Now Timmy calls.

Boys offer outstanding bills sometimes!

 

[Ghostrider]

Unfortunately I don't have time to play with pictures for the fun of it right now. I have not had any of my well paying work yet this month so I'm scrambling with my 3D work to get something in the shop to make sure we have February rent covered. I have to get that done before I can design a Boobie LE. We have the 2 LEs up on the website and a 3rd that's not been shown yet so I got a little time on that before Face needs designs for that, and I got a great idea for the battery tube but actually making the graphic is going to take a good amount of time and likely swearing. Still trying to figure out how to make boobs cutout on the tank sleeve that isn't just a sideways 8 shape.

Too bad the boobs cant stick out from the PV, I'd rub em the whole time while vaping lol.

 

[silentdoom]

Haha. Like having you're own booba statue.

 

[*ASH*]

Morning everyone hope all doing fine .

 

[Fisty]

So I'm about to order my first DIY stuff. Two questions. Is the 100 mg 100% VG nicotine okay? And two ... any recommendations on flavoring? Lol

Or should I get the 50/50 pg/VG nic ?

That's what I have, I won't order it again.. it's just too damn hard to work with. 50/50 or 100% PG would be much better IMO.

 

[LadyStrick9]

SORRY! WARNING....VERY LONG POST!

Actually, I've found that burrito-ing 2 of the Good Prophets pre-oxidized wicks fits the iHy perfectly, and wicks quite well for me.
Stainless Steel Mesh for DIY atomizers (Pre-Oxidized)

I added this to the spreadsheet "Vendor" Section. Thanks Neoexodus!

I looked, but did not see any info on what offset coils are or what they do - just a reference to "offset" coils.

I wish I could remember who it was that was talking about "offsetting coils" (I think it was either Evilferret or EZkill), but the posts in the spreadsheet may be exactly THAT...just called something different?

Offsetting the coils is positioning them so you have more wraps towards the bottom of the wick instead of evenly spacing them out. I find that when they're even, the top portion of the wick dries out too fast resulting in dry hits. With my 4/3 setup, I have 3 wraps down low towards the wick hole, and a long wide wrap going up to the pos post screw. That way the heat is concentrated down low, closer to the juice. Hope that makes sense.

Makes perfect sense - thanks!

Yes, thanks so much DarklyNoon! That does make sense. I think I was looking at THIS post (see #6 by Evilferret)...maybe this is what I thought was meant by "offsetting coils"?

Spent a couple hours DIYing yesterday and grabbed one of the bottles on the way out the door going to work - it is awesome!
13% TFA Vanilla Swirl
2% TFA Dolce de Leche (because I didn't have enough Vanilla Swirl for the 30ml bottle)
Tastes great!

Sounds good! I added it to the DIY Spreadsheet! Do you have a name for it yet? "Swirly"? LOL Let me know so I can add it later? Thanks for sharing recipes!

Hey guys I posted the fix I did for my switch the other day but not sure if anyone saw it. I had the same problem with my switch pushing in and not releasing. Very sticky. What was happening is the spring was getting stuck in the bottom hole of the derlin. I put a larger diameter spring in it and it works beautifully now. Magnets would also work. Hope this helps.

Good "tip" Six3Six! (And YES I put it on the spreadsheet too)! Phewww! I'm going KRAZY tonight! Someone stop me! hehehe

Couldn't resist, just bagged a gunmetal on a UK forum

Ewww, Mark Sure symptoms of "ihybriditis"! But, it's not "terminal"...just periodically "painful" (on your wallet). hehehe

Hello everyone, just recently found out about this thread and decided that i would drop in. I currently do not own a genesis and had been debating for awhile wether or not i wanted to jump on one, but i recently had a chance to vape two different genesis mods at a vapemeet, one being an orion v2 , the other being an ihybrid and was pretty blown away.
Sadly now that i know im ready for one and will have the extra cash soon with tax season coming up every single genesis type mod seems to be sold out, par fof the course with my luck, but hopefully if im lucky to snag one i can count myself amoung the lucky.

Now i find myself glued to my pc trying to snag one.

Edited my post thanks for letting me know, never ceases to amaze me how.welcoming these forums are.
Id like to snag one of those 10 hellraisers but im not going to hold my breath on them still being available for very long.
I was really impressed with the quality of the ihybrid though, and the amount of options for personalization with these is also a big plus.
Thanks for the warm welcome everyone

Welcome Reaper! Another victim of "iHybriditis" <heavy sigh>. Spend some time reading the Reference Spreadsheet (link is in my signature while you wait to snag your iHybrid ) And bookmark it! It will come in handy! This is a great Forum! You'll fit right in

yeah, from J-Wraps

FYI, J-Wraps is in the "Vendor" Section of the Reference Spreadsheet

did a setup with new mesh.
rolled the wick and setup the coil on unedited video,.
Wick Making on the iHybrid - E-Cigarette Review's, Tips, and Tricks

OMG, I LOVED this video Crashtest! I appreciate your taking the time to do such a "how-to" video! Thanks!

Made THE JACK juice. Peppermint and chocolate with a bit of cotton candy for sweetener. Its good, but its going to have to steep.

Yep...Sgresham! I added this recipe to the DIY Spreadsheet too! Thanks! (I just called it "The Jack Juice")

It's called: The Vaping Evolution with AlmightyGod
Mondays at 8pm EST -7pm CST - 6pm MST - 5pm PST
VapeTV | Home
Or vapetv | Stickam
Here is the YouTube link for a show I did on the iHy: The Vaping Evolution with AG - The iHybrid - YouTube

Dang! I keep missing the show too AG! Sorry! I put it at the TOP of the spreadsheet for THAT reason! LOL Maybe folks will see it!

So I'm about to order my first DIY stuff. Two questions. Is the 100 mg 100% VG nicotine okay? And two ... any recommendations on flavoring? Lol

Hi jeffy! Good to see you again! Hey check the DIY Spreadsheet (I just linked it above)...there are TONS of great "how to" links on there!

Morning everyone hope all doing fine .

Hi Ash, good to see you Good Morning!

Well, folks...I'm "somewhat" caught up. I'm still looking for the post with the pictures of "The Jack"? I must have missed some pages....I've been in an awful backlog and in a hurry to catch up. If someone has it...link it here or in PM? Thanks!

Amien, I'm glad you're feeling better. Hello and goodnight to everyone

~Lady~

 

[Skud]

I know this is not really a good job (I'm far from being a pro), but I couldn't resist the challenge.

i like it! good work!!! thank you for completing my poster!

let's start collecting "most interesting vaper in the world" quotes.

i started everyone out with my first three ideas and i'll add a few more:

1. His coils always glow evenly...
2. His tank never runs dry...
3. His multimeter fixes a short before it gives a reading...
4. He always knows where his air hole is...
5. He dropped his iHy once just to see what it was like, and his tank did not break...
6. Faceless buys Limited Editions from him...

chime in and keep 'em coming!

 

[Faceless]

just checking in, almost all caught up Lots of stuff gonna hit yall by storm

 

[DukeBlue]

just checking in, almost all caught up Lots of stuff gonna hit yall by storm

Sounds good, I’m ready for a vape storm.