The iHybrid APV - A fully Customizable Genesis

Status
Not open for further replies.

Faceless

Unregistered Supplier
ECF Veteran
Dec 18, 2009
2,935
9,820
Texas
Hey any vets know why I'm getting really poor vapir production. Fat wick, VG, 3 wrap coil. Took me forever to not get hot spots but cant really get all 3 coils to glow at all. Just a bit of vapor and some sizziling.

Sounds like your wick is flooded. The harder you press, the more it fires, its a tension spring, maybe pinch the top of your wick. Also the hot spots could be from not being 100% oxidized

Also, the fatter the wick, the less vapor, from my own experience. OB is the one to verify, he seems to be a king of knowledge for wicks and such
 
Last edited:

Keegan1014

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,538
2,321
52
Delaware
Hey any vets know why I'm getting really poor vapir production. Fat wick, VG, 3 wrap coil. Took me forever to not get hot spots but cant really get all 3 coils to glow at all. Just a bit of vapor and some sizziling.

Or battery needs charged...

Sent from my Galaxy Nexus using Tapatalk 2
 

cryptodogg

Ultra Member
ECF Veteran
Verified Member
May 14, 2012
2,012
3,076
Cornelia, GA
Hey any vets know why I'm getting really poor vapir production. Fat wick, VG, 3 wrap coil. Took me forever to not get hot spots but cant really get all 3 coils to glow at all. Just a bit of vapor and some sizziling.

Does your coil lay against your wick or is it loose in certain areas? If it is loose and it's boiling the juice instead of vaporizing the juice the taste will suffer and so will your vapor.

I rolled a 325 wick with measurements of 50mm x 20mm, but I used a jumbo size paper clip when rolling so I have a big channel and it fit perfectly into the wick hole. I find I like a thin walled wick because it seems to deliver more flavor, and with the channel I have in the wick I have absolutely no wicking problems. If your flooding, tip less while vaping and see if you find a point where your vapor really picks up.
 
Last edited:

Keegan1014

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,538
2,321
52
Delaware
Waiting on the battery for measurements, is it the same diameter? If so, then yes it will be just tubes :)

26650 info 3500 mah version
IMG_20120823_151438.jpgIMG_20120823_151505.jpg
 

CASEACE79

Ultra Member
ECF Veteran
Verified Member
Jan 12, 2011
1,373
2,352
Delaware
Sounds like your wick is flooded. The harder you press, the more it fires, its a tension spring, maybe pinch the top of your wick. Also the hot spots could be from not being 100% oxidized

Also, the fatter the wick, the less vapor, from my own experience. OB is the one to verify, he seems to be a king of knowledge for wicks and such

I don't think oxidation is the problem. I jack Frosted the hell out of it. Then rolled and did the light and quench 4 times. Liquid and lighter like 5-6 times. Gonna try rolling a new one tonight when I get off work.
 

Faceless

Unregistered Supplier
ECF Veteran
Dec 18, 2009
2,935
9,820
Texas
Already one In the classifieds...
Tisk Tisk
I'm keeping mine.

Sent from my Galaxy Nexus using Tapatalk 2

Doesn't bother me :) I assumed that would happen when I saw certain names on the list. The only problem is, cant really ask for a high price when I will be able to meet demand. I think thats why a few others on other forums don't like me so much. I can pretty much do away with scalpers. I would rather go buy another $80,000 machine to keep up with demand than people not being able to get one, however they are limited right now, so expect it :)
 
Status
Not open for further replies.

Users who are viewing this thread