The iHybrid APV - A fully Customizable Genesis

[Ezkill]

I have mod problems...

Now I'm going to have trippy tip problems.

Oh just in case Faceless...Clouds of Vapor posted like 100 trippy tips today. GO GO GO GO.

I'll send you the 161 later today for the green, black, magnets, shipping and whatever extra tank you're including with tube purchase. Not sure if it's 1 or 2 since it's two sets of tubes . I'm good with either as long as I have one extra I won't have to worry. I'll put Green and Black Tubing in the description.

Edit: I'm hoping eventually you will do a green bottom switch, I'm totally in for that and the already planned green tank ring. Would look fantastic.

 

[Faceless]

I have mod problems...

Now I'm going to have trippy tip problems.

Oh just in case Faceless...Clouds of Vapor posted like 100 trippy tips today. GO GO GO GO.

I'm going to a local place to have them right now!! lol, they want 3 iHybrids, maybe I can get some for free lol, and stopping at post office to ship all these packages.

Gruss, I put your switch in there also

Elf, I put your top cap in yours

BBL, fun Dallas traffic awaits me!

 

[grruss]

I'm going to a local place to have them right now!! lol, they want 3 iHybrids, maybe I can get some for free lol, and stopping at post office to ship all these packages.

Gruss, I put your switch in there also

Elf, I put your top cap in yours

BBL, fun Dallas traffic awaits me!

Thanks Face. Does that switch have old spring, new spring, magnets?

Sent from my Transformer Prime TF201 using Tapatalk 2

 

[poon76]

Face didn't I read somewhere you hate green?

 

[Ezkill]

Face didn't I read somewhere you hate green?

When I asked about the green tubes many many pages ago he said dark green was his favorite color.

 

[LadyStrick9]

Thanks, Lazarrred, I added it to the links site. I don't know "Rick's" last name....do you? I will watch the video all the way through to find that on my own, however. LOL

No wonder I couldn't find a "Jack Frost" video. LOL Thanks so much!

~ Lady ~

@ Ladystrick. Rick did a 3 part tutorial on genisis atty's where he does the Jack Frost method, but, lol, he "forgot the guys name". Anyway, all three vids are good, and he is very thorough on prepping the wick.
Complete Genesis Atomizer Tutorial (Part 1) - YouTube

 

[grruss]

Thanks, Lazarrred, I added it to the links site. I don't know "Rick's" last name....do you? I will watch the video all the way through to find that on my own, however. LOL

No wonder I couldn't find a "Jack Frost" video. LOL Thanks so much!

~ Lady ~

Don't know for sure, but his screen name both here and youtube is rweschler.

Sent from my Transformer Prime TF201 using Tapatalk 2

 

[LadyStrick9]

That's right Ggruss! I knew it was something like that. Thanks so much

Don't know for sure, but his screen name both here and youtube is rweschler.

Sent from my Transformer Prime TF201 using Tapatalk 2

 

[murtcepS]

Hey Faceless. Can you get me the tracking number for my order? I PM'ed you but no response. Figured it might get delivered today....No dice,and need to track it. Thanks.

 

[DukeBlue]

ohhhhh EFFF, fffuuuuuu gov' holidays, wtf. completely forgot about that. and i was all ready to expect it monday ;/ guess it gives my ss another day to get here

anyone in FL got some SS they wanna send me? i'll gladly compensate for it

I’m in the same boat, Faceless shipped out my iHybrid today. I was so looking forward to it being delivered Monday. Mondays also my birthday and it’s going to be the best present I get lol. Totally forgot the 3rd was also a Gov. holiday . I guess I could use the extra shipping time to oxidize and roll some wicks lol, or just get drunk.

 

[UnFettered_Soul]

I can't find it either. Come to think of it I don't know that one was done specific to the Jack Frost method. Just that he oxidized the mesh before rolling the wick & then I believe after rolling.

I think, but can't swear, that the Jack Frost method is in this set of vids
Complete Genesis Atomizer Tutorial (Part 1) - YouTube

 

[UnFettered_Soul]

Yes they do.. and with genesis atty's if you get one with a smaller than average hole it does even more.

I was going to mention this also.
Smaller holes. My current Trippys make my hybrids almost too airy. I need some with smaller holes.

 

[Lazerrred]

Thanks, Lazarrred, I added it to the links site. I don't know "Rick's" last name....do you? I will watch the video all the way through to find that on my own, however. LOL

No wonder I couldn't find a "Jack Frost" video. LOL Thanks so much!

~ Lady ~

You are welcome Ladystrick. I think it is Rick Wechsler, goes by rwechsler on ecf.

 

[DeviantDe]

I was going to mention this also.
Smaller holes. My current Trippys make my hybrids almost too airy. I need some with smaller holes.

You can get slightly fatter o-rings for the Trippy tips to solve some of the air-flow issue. I do like how the hole is now as the trippy's stay in just fine, but I can still get them out easily. I have tanks where I worry about breaking the Trippy tips trying to get them out.

 

[MissEmma]

Allright, allright I'm sold!

My theory was that since the juice was atomized inside a stainless steel chamber and then the vapor swirled around the same chamber and came out a SS tip it wouldn't make a difference.

I don't mind when my theories are wrong, especially when they enhance my vaping experience.

I love glass tips...I have both trippies and sagewood. They feel very nice, and I agree with grruss....are flavor neutral.

 

[evilferret]

Got my Pluid! Yahs! Just went through nic OD! Yahs!

Time to cut the juice!

Anybody know if anybody has any cool teflon drip tips? Sorry to all the glass lovers but I'm a chewer and glass + chewing = bad times.

All my Sagewood glass drip tips seem to block airflow. Seems to sit on the positive screw.

Keegan, thanks for the springs! You have saved my hands! I have no idea why the stiffer spring seems easy to activate.

 

[Keegan1014]

Got my Pluid! Yahs! Just went through nic OD! Yahs!

Time to cut the juice!

Anybody know if anybody has any cool teflon drip tips? Sorry to all the glass lovers but I'm a chewer and glass + chewing = bad times.

All my Sagewood glass drip tips seem to block airflow. Seems to sit on the positive screw.

Keegan, thanks for the springs! You have saved my hands! I have no idea why the stiffer spring seems easy to activate.

It is flat top and bottom, not cone shaped.
You're very welcome.

Sent from my Galaxy Nexus using Tapatalk 2

 

[maleko]

My pluid did not come today still is marked Missent

 

[CASEACE79]

My pluid did not come today still is marked Missent

My pluid did not come either. At least I know where mine is. Here's to hoping yours gets there tomorrow.

 

[evilferret]

Hope you guys get your Pluid tomorrow!

Just mixed some Pluid w/ menthol/WTA to try to cut down the nic. Should have bought the cutter.

Edit: Hope you guys have an awesome weekend! Time to rest!