The iHybrid APV - A fully Customizable Genesis

Status
Not open for further replies.

Faceless

Unregistered Supplier
ECF Veteran
Dec 18, 2009
2,935
9,820
Texas
I haven't tried it in the iHybrid but I'm pretty sure Face upgraded the tip holes to be the same as the Zenesis after people couldn't find a tip that worked in the prototypes.

I dont know if its the size of a zens, I just measured my drip tip lol

Okay, here's a kicked 18650 tube next to a Zen Std...



Pretty tall...

Its the Chuck Norris of mods :)

I understand that as well, but it won't stop. I guess it isn't wicking at all. I don't know, I'm disgusted with it. I'm gonna soak in the tub...LOL

Your TI Zenesis? whats wrong with it? $500 is a lot to be throwing it in tubs lol

So am I like the only one who only has 4 drip tips? only 2 of which ever get used

4!? I'm addicted to drip tips, I have over 40 glass ones as of today and over 100 total drip tips lol

I wonder if any 911's made it to the post office

Nope, they closed at 12pm, I didnt manage to get out of bed until 10am and I just finished them and got home about an hour ago :)

Hope they all made it he said some Fri if not sat. Will be nice my tank busted so ordered some from Zen, I hybrid or if 9/11 shows first but till then my Ihybrid is paralized for the moment...I have went to many hardware stores to find something to modify a tank with to fit...I guess if I have to I'll use another device but won't be satisfied at all....after using ihybrid

everyone of them will be shipped monday :) I have drip tips and everything :) , I'll post final pics on monday, I have to assemble them tomorrow during football, so I hope football doesnt distract me and they all work right LOL

At least I've had plenty of time to make a stack of mesh wicks and twist alot of wire. Lmao. Was trying to mass produce some mesh using a big mapp gas tank and it just destroyed all the mesh must have been a little to much heat or air pressure not sure but wasn't good...live and learn. I tried teaching my 5 and 11 year old girl to do a assembly line on mesh coil setups and when wife came downstairs and saw my 5 yr old girl wit butane torch,safety glasses and long glowing wick in her hand smacked me in the back of the head and shut down production so now a one man show again.....SUCKS

LOL, reminds me of this

Daughter: Dad! Theres a monster under my bed!!
Dad: Let me check, ahhhhhhh its eating my arm ahhhhhh..... just kidding, the monster only eats kids, now go to sleep!

I received my drip tips from Brett today. They do fit perfectly on the iHy, I love the way they fill up the top cap.



IMG_20120922_174312_zpsee182798s_zpsc88d831a.jpg




IMG_20120922_174521_zps6b5fc19cs_zps4b349c04.jpg

where do you get those blue orings?

O-ring options here. I don't know what the metric equivalent is for 11/16 OD so I'll link to all the o-rings on the site.
ring - Free Shipping - DealExtreme

Its about 17.45 MM roughly, you might be safe with 18mm
 

Faceless

Unregistered Supplier
ECF Veteran
Dec 18, 2009
2,935
9,820
Texas
I got the O-rings from houseofhybrids. I couldn’t find them anywhere else at the time and thought if the tank fits so does the O-rings.

yep, the 5/8 orings will fit also, but if you use them for the top cap area it will be loose, I think, depends on the material. I only use food grade orings :)
 

NancyR

Account closed on request
ECF Veteran
Apr 25, 2012
7,927
13,419
Washington State
4!? I'm addicted to drip tips, I have over 40 glass ones as of today and over 100 total drip tips lol

Yes Faceless I have 4, the 2 SS mings I got in a co-op, and one that came on the vivi nova, which I have never used, and one that came on a DCT that I used once because my SS where too tight in it.
 

evilferret

Ultra Member
ECF Veteran
Verified Member
Feb 6, 2010
2,404
1,478
Flushing NY
well I haven't even tried a glass tip yet, at least the ss ones are better than those plastic things lol

Take your time Nancy!

Hey I started with the plastic ones too! Think most of us started with plastic since those were available first.

Man I remember when I was giddy over colored carto caps.

Hmm wonder if theres anything to stalk tonight.
 

NancyR

Account closed on request
ECF Veteran
Apr 25, 2012
7,927
13,419
Washington State
Take your time Nancy!

Hey I started with the plastic ones too! Think most of us started with plastic since those were available first.

Man I remember when I was giddy over colored carto caps.

Hmm wonder if theres anything to stalk tonight.


See actually I started with the SS ones, as ex bf who helped get me started told me he thought the ss ones where better than the plastic, at the time he didn't even know there was glass ones out as he never kept up with the changes and was still happy with his ego-T. I hadn't had any drip tips and seen a co-op for the ss ones here on ECF so got into it.
 

Faceless

Unregistered Supplier
ECF Veteran
Dec 18, 2009
2,935
9,820
Texas
Why not start a list. Only promise 30. But then if you decide to do more then you would have an idea of how many to do.

I dont want to make a list lol, its a pain. Plus only 30 will be getting 30ml of pluid, the ones after it just get the pluid kit :) I dont think I'm going to send pluid with yours LOL, I might to be humorous
 

evilferret

Ultra Member
ECF Veteran
Verified Member
Feb 6, 2010
2,404
1,478
Flushing NY
I dont want to make a list lol, its a pain. Plus only 30 will be getting 30ml of pluid, the ones after it just get the pluid kit :) I dont think I'm going to send pluid with yours LOL, I might to be humorous

Number the Pluid bottles from the kit and see if they vape it or save it as a collectible!
 
Status
Not open for further replies.

Users who are viewing this thread