The iHybrid APV - A fully Customizable Genesis

[Faceless]

it will make all your attys kickable also

 

[LongHaul]

i want to know how you used the iHy atty on the GG?

 

[NancyR]

Yahs!

Is it different than the 510 atty top you were planning to make earlier?

Either way glad this is on the table!

the 510 atty top was going to be so the atty could be used on other devices if I understand correctly, this will let other devices be able to be used on the iHy

 

[MaxPerilous]

Ok, I'm gonna make a part that screws on the top of the tubes to make the tubes a mechanical mode also, so you get an all in one genny device and/or a mechanical tube also It will be cheap sold solo and it will be included with all standard and LE kits in the near future, prices will go up to compensate for the new part included but it will be cheap, no more than $255 for the full kit with the attachment for the mechanical mod conversion included. Hope I'm making sense, basically a genesis device and a paps like tube all in one so now you can have the hard hitting effect with all your RBA genesis attys and use it for any 510 connection atty you want on top, it will be lined with silver to give it that extra power to make your DIDs and what not even more powerful Now thats unique if I say so myself expect it within a month for under $40 retail, probably closer to $20-$30 but I need to see the cost of making it. Its a small part so it should be cheap

Ok..........get excited now

OMG that's so sweet. I will not be afraid to trade my provari after seeing this!!!

 

[Schneck]

Sounds like you breaking the mold...my friend and are way out front in the hybrid race....I'm glad to be a part of it all......

 

[evilferret]

the 510 atty top was going to be so the atty could be used on other devices if I understand correctly, this will let other devices be able to be used on the iHy

Weird, for some reason I thought it was going to be a new top piece to allow 510 pieces not the other way around.

Face said he wasn't going to make a ZAU/ZAP style Genesis before (but who knows!).

Who knows and who cares! We got 510 top caps!

 

[LongHaul]

ok with this part you really have my attention

 

[MaxPerilous]

Can you make them with changable connections?? I.E. 801? That way people don't have to use adapters!

 

[Schneck]

i want to know how you used the iHy atty on the GG?

Me toooooo.........unveil the secret ........lol. I would love my ihy atty on gg cus gg getting lonely.

 

[kiska]

Ok, I'm gonna make a part that screws on the top of the tubes to make the tubes a mechanical mode also, so you get an all in one genny device and/or a mechanical tube also It will be cheap sold solo and it will be included with all standard and LE kits in the near future, prices will go up to compensate for the new part included but it will be cheap, no more than $255 for the full kit with the attachment for the mechanical mod conversion included. Hope I'm making sense, basically a genesis device and a paps like tube all in one so now you can have the hard hitting effect with all your RBA genesis attys and use it for any 510 connection atty you want on top, it will be lined with silver to give it that extra power to make your DIDs and what not even more powerful Now thats unique if I say so myself expect it within a month for under $40 retail, probably closer to $20-$30 but I need to see the cost of making it. Its a small part so it should be cheap

Ok..........get excited now

If this ever goes to beta testing count me in!! Lets see how many makers try to copy this concept lol....

 

[LongHaul]

the iHyG............

 

[NancyR]

Now I ani't just joking around Face I would love to help test that if you need testers

 

[MaxPerilous]

So cool faceless. I'm def gonna trade the Provari for another iHy once these comes out lol. MUST get an 18650 kick tube though. Make sure and save me one!! lol

 

[Schneck]

OK so now I can dump off all my other tubes and use stricky ihy.....unless u still gonna make a screw on ihy atty for paps caravella tubes

 

[Faceless]

Nice, essentially it'll be a true customize able hybrid setup then.

yep, and just thin if you have colored tubes

Yahs!

Is it different than the 510 atty top you were planning to make earlier?

Either way glad this is on the table!

yes

You still
Gonna make 510 connector for the atty section?

yes I am, it coming soon also

Can you make them with changable connections?? I.E. 801? That way people don't have to use adapters!

I will see how difficult that is

If this ever goes to beta testing count me in!! Lets see how many makers try to copy this concept lol....

Thanks for the idea kiska!! It was a great one!! Thats why I like yall as much as yall like me lol

about to post the pic of the concept and what I did at fossil rim today

 

[MaxPerilous]

oh and take THAT you other hybrid manufacturers that arent as cool as Faceless, you saw it HERE FIRST!!! lol

 

[Faceless]

OK so now I can dump off all my other tubes and use stricky ihy.....unless u still gonna make a screw on ihy atty for paps caravella tubes

yes, I'm still making those

 

[DukeBlue]

So cool faceless. I'm def gonna trade the Provari for another iHy once these comes out lol. MUST get an 18650 kick tube though. Make sure and save me one!! lol

Yeah that’s a game changer, I also need a 18650 kick tube now.

 

[MaxPerilous]

yep, and just thin if you have colored tubes



yes



yes I am, it coming soon also



I will see how difficult that is



Thanks for the idea kiska!! It was a great one!! Thats why I like yall as much as yall like me lol

about to post the pic of the concept and what I did at fossil rim today

Dude you are totally awesome!!! Even if it's not an interchangeable. I would buy two of each the 510 and 801.

I bet now I could talk my wife into an Ihy too!! Happy day!! lol

 

[Faceless]

so imagine thats a ZAU or Cobra or DID, on the iHybrid battery tube and if you have colored tubes