The iHybrid APV - A fully Customizable Genesis

[Out Of The Ashes]

Getting really windy here in Pittsburgh, our 2' spider decoration flew away and it had some weight to it!

 

[Faceless]

How much are they going to be face

$255

G, day mate
It would be good if I have an Idea about my iHybird when it will be arrived to Australia,
USPS notification doesn't give me anything .it just sad that
Your Item's Status
The U.S. Postal Service was electronically notified by the shipper on October 26, 2012 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Please be advised tracking is not available for this product. Information, if available, is updated periodically throughout the day. Please check again later.


Don know when and how

Over seas usually take 1-2 weeks from my personal experience

 

[NancyR]

havent checked past post, I'm just posting, so if I have any questions to read I will do it in a bit. Just letting everyone know not to get excited, I'm about to print the spider shipping labels but not shipping until friday, I'm doing this so they dont get buried by the dragon pre order tonight at 9pm central time. Also, I'm only doing the sale for the blue ones, I know some people are without power and internet so I will post the red ones in a few days so others without power have a chance So, Only the BLUE ones will be tonight Red in a few days, sorry if you were waiting on red tonight, but I just want to be somewhat fair, I cant make everyone happy

Thanks Face, it is awesome to see someone think about something like that instead of just be like too bad you missed out.

 

[Faceless]

G, day mate
It would be good if I have an Idea about my iHybird when it will be arrived to Australia,
USPS notification doesn't give me anything .it just sad that
Your Item's Status
The U.S. Postal Service was electronically notified by the shipper on October 26, 2012 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Please be advised tracking is not available for this product. Information, if available, is updated periodically throughout the day. Please check again later.


Don know when and how

PM me name on shipment please

 

[Faceless]

Thanks Face, it is awesome to see someone think about something like that instead of just be like too bad you missed out.

yeah, I just hope they didnt want blue

 

[grruss]

yeah, I just hope they didnt want blue

They should be elated that you considered them. I would be.

Sent from my Galaxy Nexus using Tapatalk 2

 

[Fisty]

Oh,do i just clean the top of the screws or take it apart and clean?

Take the switch off, unscrew the brass screw on it and it'll come apart into two pieces with a spring in between. Clean the inside of the screw side piece and the outside top part of the bottom piece. That's where it makes contact when you press the button and they can get oxidized there from hand sweat and such.

edit: a q-tip with alcohol is the best thing to use. If your performance is much better after than then it was the problem. (likely) If it is good for a few days and then starts getting bad again you'll probably need to do like I do and get some "no ox ID special" to use on those areas to keep it from oxidizing. It works wonders. I use a very thin layer, less is best.. but I only have to clean my switches about once every month and a half instead of once a week.

 

[Faceless]

Side note: finished up 100 drip tips today also got files from phr0st for spiders, be engraving in morning and posting pics also gonna make some more tank sleeve rings and make the 510 for mechanical mod tomorrow, should be done rather quick

 

[therealcmac]

I am hooked.....subbing....

 

[Fisty]

You could put up 1/2 of the blue and 1/2 of the red now and the other half in a few days? /shrug

 

[Faceless]

Take the switch off, unscrew the brass screw on it and it'll come apart into two pieces with a spring in between. Clean the inside of the screw side piece and the outside top part of the bottom piece. That's where it makes contact when you press the button and they can get oxidized there from hand sweat and such.

aslo make sure your coil isnt boiling, it could have broke in and its flooding take the cap off and fire it to make sure to see what your wick and coil are doing

 

[Faceless]

You could put up 1/2 of the blue and 1/2 of the red now and the other half in a few days? /shrug

I could, but then I would just get massive amounts of emails asking if I have extra because they missed it, hopefully they can read the notes, plus it makes it easy on me for shipping, I will know orders placed on certain dates are certain colors without having to click each order to see

 

[Faceless]

My wife cracks me up, she asked me how I made my avatar, she said she can still tell its me with no face lmao, she thinks its a real pic and not a render lol

 

[NancyR]

My wife cracks me up, she asked me how I made my avatar, she said she can still tell its me with no face lmao, she thinks its a real pic and not a render lol

just goes to show how good Fisty is

 

[Fisty]

My wife cracks me up, she asked me how I made my avatar, she said she can still tell its me with no face lmao, she thinks its a real pic and not a render lol

I guess I did a good job getting your head and jaw shape right then. LOL

 

[WNCmotard]

Side note: finished up 100 drip tips today also got files from phr0st for spiders, be engraving in morning and posting pics also gonna make some more Tank sleeve rings and make the 510 for mechanical mod tomorrow, should be done rather quick

You know, this would be much easier if I could just route a portion of my monthly pay straight into an iHy FSA every month for future purchases.

 

[Ezkill]

2 days of massive headaches from the head wound, can't really sit at a computer for long periods of time...really behind on the thread. At least the staples themselves don't hurt, lol. Ironic, that.

Someone help me out:
1) What time are dragons going up?
2) I saw that Face made 100 DT's are they going up for sale as a part or just with the LE's/14500's?
3) 14500..any word on glass?

I know the answers are somewhere. Can't look for them right now. Sorry guys...hate asking stuff that's been answered already.

 

[NancyR]

You know, this would be much easier if I could just route a portion of my monthly pay straight into an iHy FSA every month for future purchases.

now if he just sold batteries, mesh and wire we would all be set

 

[NancyR]

2 days of massive headaches from the head wound, can't really sit at a computer for long periods of time...really behind on the thread. At least the staples themselves don't hurt, lol. Ironic, that.

Someone help me out:
1) What time are dragons going up?
2) I saw that Face made 100 DT's are they going up for sale as a part or just with the LE's/14500's?
3) 14500..any word on glass?

I know the answers are somewhere. Can't look for them right now. Sorry guys...hate asking stuff that's been answered already.

#2 Last I heard was he was only going to do the dt's with the LE's and the 14500, tho hoping he has changed his mind again

 

[Phr0stByte]

My wife cracks me up, she asked me how I made my avatar, she said she can still tell its me with no face lmao, she thinks its a real pic and not a render lol

LOL!
(ten chars)