The iHybrid APV - A fully Customizable Genesis

[CHARGER72]

Good morning everyone. Bookmarking to go clean the house. Whooppeeeee not

 

[Blaine]

Hey Blaine...one more day!!!!!

Hi KTK8! Yeah tomorrow is my day off since i have to work saturday

 

[KTK8]

Hi KTK8! Yeah tomorrow is my day off since i have to work saturday

was talking about the video......

 

[*ASH*]

Ok see all latter

And hi Lady ..

 

[Blaine]

Morning mate how u doing ?

Hi KTK & Charger

Good how are you

 

[Paul66]

No it's opposite, less ohms is higher Amp drain and higher ohms is less Amp drain

example two coils 0,9 ohms and 2,2 ohm both at 4 volt.

P = U x I = U x (U/R) = U^2 / R

So for 0,9 ohm coil you get (4 x 4)/0,9 = 17,7 watts (higher drain)
and for 2,2 ohm coil you get (4 x 4)/2,2 = 7,3 watts (lower drain)

I read on this thread somebody saying something about less ohm coil drawing less battery juice? Is that right sounds right but i can never tell the difference. Also, when you push the button the battery fires and produces whatever voltage the battery is at in its charge cycle right? So rrally coil ohms should not matter because these are mechanical mofs and are batteries are mot smart. You are though faceless! Sucking up waiting for dragon

 

[jonnyblatt]

Yes, if you have a battery that's at 3.6 it will fire at 3.6. You need a kick to regulate output voltage/wattage.

I dont know what you mean when you say coil ohms should not matter?

I read on this thread somebody saying something about less ohm coil drawing less battery juice? Is that right sounds right but i can never tell the difference. Also, when you push the button the battery fires and produces whatever voltage the battery is at in its charge cycle right? So rrally coil ohms should not matter because these are mechanical mofs and are batteries are mot smart. You are though faceless! Sucking up waiting for dragon

 

[grruss]

No it's opposite, less ohms is higher Amp drain and higher ohms is less Amp drain

example two coils 0,9 ohms and 2,2 ohm both at 4 volt.

P = U x I = U x (U/R) = U^2 / R

So for 0,9 ohm coil you get (4 x 4)/0,9 = 17,7 watts (higher drain)
and for 2,2 ohm coil you get (4 x 4)/2,2 = 7,3 watts (lower drain)

OR, stated another way, battery drain (current) has an inverse relationship with resistance. The higher the resistance, the longer the battery will last, assuming all other variables are the same. One variable that tends to change is the time the switch is held closed. When I setup a higher resistance coil, I tend to take longer hits. So, for me, it's hard to make a fair comparison.

Sent from my Galaxy Nexus using Tapatalk 2

 

[CHARGER72]

Oh your using ohms law

Wow that post hurt my brain. But understood. The coil is asking fir more power wether the battery likes it or not. Got it.

No it's opposite, less ohms is higher Amp drain and higher ohms is less Amp drain

example two coils 0,9 ohms and 2,2 ohm both at 4 volt.

P = U x I = U x (U/R) = U^2 / R

So for 0,9 ohm coil you get (4 x 4)/0,9 = 17,7 watts (higher drain)
and for 2,2 ohm coil you get (4 x 4)/2,2 = 7,3 watts (lower drain)

 

[Dizzei.K]

USPS finally found my iHybrid, I should be joining the ranks of the Hybreeds around 5 today Any special tips I should know of for a new iHybrid owner?

 

[MrMayhem]

USPS finally found my iHybrid, I should be joining the ranks of the Hybreeds around 5 today Any special tips I should know of for a new iHybrid owner?

When vaping it for the first time you might want to be seated. Rumor has it people have passed out on their first try.

Good Morning Hybreeds!

 

[jellis1414]

I will purchase. What do you need for me to get on the list? PM? Deposit?

Thanks,

Jason

 

[grruss]

I will purchase. What do you need for me to get on the list? PM? Deposit?

Thanks,

Jason

No lists, no deposit. Go to www.ihybridmods.com, and just buy it.

Sent from my Galaxy Nexus using Tapatalk 2

 

[MrMayhem]

I will purchase. What do you need for me to get on the list? PM? Deposit?

Thanks,

Jason

There isn't a list anymore. Go to The iHybrid Home

You're just north of me, I'm in Harford County too

 

[Blaine]

I read on this thread somebody saying something about less ohm coil drawing less battery juice? Is that right sounds right but i can never tell the difference. Also, when you push the button the battery fires and produces whatever voltage the battery is at in its charge cycle right? So rrally coil ohms should not matter because these are mechanical mofs and are batteries are mot smart. You are though faceless! Sucking up waiting for dragon

the lower the ohm the more the watts the more the battery drain .. example a 1.2 ohm coil will draw more power than a 1.5 ohm coil and the battery will die faster on the 1.2 ohm coil. yes the mod will produce what ever voltage the battery is at yes the ohms do make a difference when you think interms of watts.. to get the watts from your unit you would take volts x 2 divided by ohms...example 3.7 volt battery with a 1.5 ohm coil setup..so let say 3.7 volts x2= 13.69 volts divided by 1.5 ohms would give you 9.13 watts roughly and a 1.2 ohm coil would be pushing 12.5 watts roughly if i am wrong in any way someone please feel free to correct me i hope this helps with any confusion any one may have

edit: lol took me over 40 minutes to type this cuz I am at work and customers came in lol looks like it was posted above already

 

[Phr0stByte]

USPS finally found my iHybrid, I should be joining the ranks of the Hybreeds around 5 today Any special tips I should know of for a new iHybrid owner?

Check out Lady's list of painstakingly compiled info here: https://docs.google.com/spreadsheet/ccc?key=0AmYrSL_FJC4NdHZUb0xvVzRrNi1Qb2NCQ0dUUVdZUmc#gid=1

 

[RippleInStillWater]

rat post......

 

[Blaine]

was talking about the video......

oh yeah lol

 

[Shaitaan]

blaine will be doing a video tutorial for it this friday

Simple question I hope .....

Does anybody still do the Peter K method with twisted wire ??

Never twisted but getting set to try soon.

 

[Shaitaan]

yea they do

Godsmack rocks!