The iHybrid APV - A fully Customizable Genesis

[MaxPerilous]

First I wanna say TY Springfieldarms!! You are a gentleman and a scholar!

Secondly I wanna say Gaw Dammmmmit!!! I broke the glass you gave me.....

I managed to break two tanks in one single day. I seriously think the the Pluid swelled up my gaskets and made it impossible to put on or remove glass without breaking it... I don't know what else it could be. I totally soaked the hell outta the o rings with juice and slid the tnak down once it got to the bottom I was gonna use the cap to snap it down the last 1/4" or so and pop shatter glass in my lap.

I've been utterly defeated by my iHy today. I'm gonna sit here and pout and lick my wound (from breaking the first tank trying to get it off), until my tanks and o-rings from HoH gets here. I didn't ask earlier but assumed the o-rings would work too?? Considering same glass size. I dunno.
So i'm at work it's def a monday. Two glass tanks down. Low on Pluid. vaping a carto tank. Defeated.

At least I still have my health! Also my (not so) good looks lol.

I'm gonna have to order tanks in bulk I think lmao.

 

[vabeach454]

First I wanna say TY Springfieldarms!! You are a gentleman and a scholar!

Secondly I wanna say Gaw Dammmmmit!!! I broke the glass you gave me.....

I managed to break two tanks in one single day. I seriously think the the Pluid swelled up my gaskets and made it impossible to put on or remove glass without breaking it... I don't know what else it could be. I totally soaked the hell outta the o rings with juice and slid the tnak down once it got to the bottom I was gonna use the cap to snap it down the last 1/4" or so and pop shatter glass in my lap.

I've been utterly defeated by my iHy today. I'm gonna sit here and pout and lick my wound (from breaking the first tank trying to get it off), until my tanks and o-rings from HoH gets here. I didn't ask earlier but assumed the o-rings would work too?? Considering same glass size. I dunno.
So i'm at work it's def a monday. Two glass tanks down. Low on Pluid. Vaping a carto tank. Defeated.

At least I still have my health! Also my (not so) good looks lol.

I'm gonna have to order tanks in bulk I think lmao.

Max you need a SS tank...

 

[vabeach454]

3 made, and number #1, you know I had to have it!! I collect and that is a trophy!! gonna shine it up and put it in a glass case



Will do

I take it you saw my post on it...

 

[MaxPerilous]

Do the HoH metal tanks fit under the tank sleve? I may have to order one of those up if I have so much problems lol. When my new tanks get here I owe one to Springfieldarms so I will be without a backup.

I just don't get it. When the iHy was new it was so easy for the tank to come on and off. Now I just break stuff. That seams to be a great skill I have. You give me something bullet proof and I can break it lol.

 

[NancyR]

iHybrid, Orion V2.1, Zenesis Cobalt, and Z-Atty Pro Review!!! - YouTube

Nice review, but he did have the wrong SS, this is what Face said not too long ago concerning the ss he is using now.

..... Lets not forget that I use 316 SS now also, .....

 

[paulbald2]

First I wanna say TY Springfieldarms!! You are a gentleman and a scholar!

Secondly I wanna say Gaw Dammmmmit!!! I broke the glass you gave me.....

I managed to break two tanks in one single day. I seriously think the the Pluid swelled up my gaskets and made it impossible to put on or remove glass without breaking it... I don't know what else it could be. I totally soaked the hell outta the o rings with juice and slid the tnak down once it got to the bottom I was gonna use the cap to snap it down the last 1/4" or so and pop shatter glass in my lap.

I've been utterly defeated by my iHy today. I'm gonna sit here and pout and lick my wound (from breaking the first tank trying to get it off), until my tanks and o-rings from HoH gets here. I didn't ask earlier but assumed the o-rings would work too?? Considering same glass size. I dunno.
So i'm at work it's def a monday. Two glass tanks down. Low on Pluid. Vaping a carto tank. Defeated.

At least I still have my health! Also my (not so) good looks lol.

I'm gonna have to order tanks in bulk I think lmao.

I took my o-ring's off and washed them real good under hot water and a little dish soap.To get the tank off I put my thumb's on each side of the tank near the bottom and slowly push up on it.Then I used straight vg too lube up the o-ring's too put the tank back on.You'll have to be more careful next time.lol

 

[K-man]

Congrats Face

 

[Fisty]

Do the HoH metal tanks fit under the tank sleve?

Yes, and Zen's o-rings fit too.

 

[CHARGER72]

Nice review but turn up your mic and hello 720p we meet again.

 

[MaxPerilous]

When I was trying to take it off I couldn't get it to budge. Not one bit. It broke rather than move at all one bit.

Even after it broke. I had a hell of a time getting the peice that was left on there off. Even though I could grab it and get way better leverage on it.

I'm just gonna stock up on o-rings too and change them everytime I disassemble for cleaning. I mean I only do it like every 3-4 weeks. If it will save me some heartache it's worth it lol.

 

[CHARGER72]

Fisty please help a brother out. How big is the wick hole on the ihy? 3.5mm?

 

[Fisty]

Or your could clean it like I clean mine..
Take your syringe, fill the tank 3/4 way with everclear, shake vigorously, suck out the alcohol, repeat once or twice, dry burn the remaining alcohol off.

 

[LadyStrick9]

Secondly I wanna say Gaw Dammmmmit!!! I broke the glass you gave me.....

I managed to break two tanks in one single day. I seriously think the the Pluid swelled up my gaskets and made it impossible to put on or remove glass without breaking it... I don't know what else it could be. I totally soaked the hell outta the o rings with juice and slid the tnak down once it got to the bottom I was gonna use the cap to snap it down the last 1/4" or so and pop shatter glass in my lap.

I've been utterly defeated by my iHy today. I'm gonna sit here and pout and lick my wound (from breaking the first tank trying to get it off), until my tanks and o-rings from HoH gets here. I didn't ask earlier but assumed the o-rings would work too?? Considering same glass size. I dunno.
So i'm at work it's def a monday. Two glass tanks down. Low on Pluid. Vaping a carto tank. Defeated.

At least I still have my health! Also my (not so) good looks lol.

I'm gonna have to order tanks in bulk I think lmao.

You are kidding me Max???? OMG you poor guy!!

Do the HoH metal tanks fit under the tank sleve? I may have to order one of those up if I have so much problems lol. When my new tanks get here I owe one to Springfieldarms so I will be without a backup.

I just don't get it. When the iHy was new it was so easy for the tank to come on and off. Now I just break stuff. That seams to be a great skill I have. You give me something bullet proof and I can break it lol.

Good suggestions. I need that too


G'nite everybody

 

[Fisty]

Fisty please help a brother out. How big is the wick hole on the ihy? 3.5mm?

I don't have calipers but according to my metal ruler it's about 3mm

 

[grruss]

Fisty please help a brother out. How big is the wick hole on the ihy? 3.5mm?

Many questions about the iHybrid can be answered here,,, https://docs.google.com/spreadsheet/ccc?key=0AmYrSL_FJC4NdHZUb0xvVzRrNi1Qb2NCQ0dUUVdZUmc#gid=1

You will find this link in LadyStrick9 (It's a killer) sig.

 

[BoyNamedStacy]

Check out this tip I got for the HR... Tell me this isn't a perfect match!

 

[grruss]

Check out this tip I got for the HR... Tell me this isn't a perfect match!
http://i1160.photobucket.com/albums/q483/bbulich/DSCN9178_800x600.jpg
http://i.imgur.com/aTk5s.jpg

That will work!

 

[CHARGER72]

The spread sheet doesnt work on my phone gruss. That sounds right. I wanna go buy a drill bit. Preparing for lift off. Sorry about the tanks max. I bought a zatty pro tank in hopes that would work. If you need it i should have it wed. I will be happy to send it your way.

 

[CHARGER72]

Thank you fisty. I felt like the fat kid at the dodgeball game.

 

[Fisty]

I bought a zatty pro tank in hopes that would work. If you need it i should have it wed. I will be happy to send it your way.

ZAP tanks are "mini" sized and won't work on iHys, you need the standard sized ones.